HUANUO Dual Monitor Stand Instruction Manual

1. Маълумот оид ба бехатарӣ

Please read and understand all instructions before installation and use. Failure to follow these instructions may result in property damage, serious injury, or death.

• Иқтидори вазн: Do not exceed the maximum weight capacity of 17.6 lbs (8 kg) per arm. This mount is designed for monitors between 13 and 27 inches.
• Мутобиқати VESA: Ensure your monitors have VESA mounting patterns of 75x75mm or 100x100mm.
• Ғафсии мизи корӣ: Verify your desk thickness is compatible with the chosen mounting method (C-clamp: 0.39-2.36 inches / 10-60mm; Grommet: 0.39-2.56 inches / 10-65mm).
• Танзими пружинаи газ: Adjust the gas spring tension ONLY when a monitor is attached to the arm. Failure to do so may cause the arm to spring up rapidly, leading to injury.
• Маҷлис: Some steps may require two people for safe assembly.
• Нигоҳдорӣ: Ҳамаи винтҳо ва пайвастҳоро мунтазам тафтиш кунед, то боварӣ ҳосил кунед, ки онҳо маҳкам ва бехатар мебошанд.

2. Мундариҷаи баста

Verify all parts are present and undamaged before proceeding with assembly. If any parts are missing or defective, contact HUANUO customer service.

Тавсифи тасвир: A person unboxes the HUANUO Dual Monitor Stand, displaying various components including the VESA plates, mounting hardware, cable clips, and the main pole. This image illustrates the comprehensive set of parts included for assembly.

3. Дастурамал оид ба насб

Follow these steps carefully to assemble and install your HUANUO Dual Monitor Stand.

1. Усули насбро интихоб кунед:

   Decide between C-clamp or Grommet mounting based on your desk type and preference. Ensure your desk thickness is within the specified range for the chosen method.

   

   Тавсифи тасвир: This image shows two diagrams illustrating the C-clamp and Grommet mounting options for the monitor stand. The C-clamp is shown gripping the edge of a desk, while the Grommet mounting uses a hole in the desk surface.
2. Пойгоҳро ҷамъ кунед:

   Attach the main pole to the chosen mounting base (C-clamp or Grommet). Secure all fasteners tightly using the provided tools.

3. Пластинаҳои VESA-ро ба мониторҳо пайваст кунед:

   Place your monitor face down on a soft, clean surface. Attach a VESA plate to the back of each monitor using the appropriate screws and washers. Ensure the plate is securely fastened.

   

   Тавсифи видео: This video demonstrates the process of attaching the VESA plate to the back of a monitor. It shows how to align the plate with the monitor's mounting holes and secure it with screws, ensuring a stable connection for the monitor arm.
4. Attach Arms to the Pole:

   Slide the monitor arms onto the main pole at your desired initial height. Secure them in place with the locking mechanisms.

5. Мониторҳоро ба силоҳҳо васл кунед:

   Carefully slide the monitors (with attached VESA plates) onto the ends of the monitor arms. Ensure they click securely into place. Tighten any safety screws if provided.

   

   Тавсифи видео: This video illustrates the final step of mounting the monitors onto the dual monitor stand arms. It shows how to carefully slide the VESA-mounted monitors onto the arm brackets and secure them, demonstrating the ease of installation.

4. Дастурҳои истифодабарӣ

The HUANUO Dual Monitor Stand offers extensive adjustability for optimal viewбароҳатӣ ва ҳосилнокӣ.

• Танзими баландӣ:

  The gas spring arms allow for smooth vertical height adjustment. To adjust, gently push or pull the monitor to the desired height. If the monitor does not stay in place, the gas spring tension may need adjustment (see below).

  

  Тавсифи тасвир: This image highlights the gas spring arm mechanism, showing how it allows for smooth and free height adjustment of the monitor. It illustrates the range of vertical movement and the internal gas spring system.

• Танзими шиддати чашмаи газ:

  If the monitor sags or springs up too easily, adjust the gas spring tension. Use the provided hex key to turn the adjustment screw on the arm. Turn clockwise to increase tension (for heavier monitors) or counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the monitor stays at any desired height.

  

  Тавсифи видео: This video demonstrates how to adjust the gas spring arm tension on the HUANUO HN-DSK1 dual monitor mount. It shows the use of a hex key to fine-tune the arm's resistance, ensuring the monitor remains stable at any height.
• Хама, гардиш ва гардиш:

  Each monitor can be tilted (+85°/-90°), swiveled (±90°), and rotated (360°) to achieve the perfect viewing angle. Simply grasp the edges of the monitor and adjust as needed. The 360° rotation allows for easy switching between landscape and portrait modes.

  

  Тавсифи тасвир: This image illustrates the full motion capabilities of the monitor stand, including diagrams for 360° swivel, +85°/-90° tilt, and 360° rotation, allowing users to customize their screen angle for optimal viewing.

• Flexible Arm Extension:

  The articulating arms can extend up to 64cm (25.2 inches) or retract to 41cm (16.1 inches), providing flexibility for various desk depths and viewing distances. This also allows for combining arms for shallow or deep desktop configurations.

  

  Тавсифи тасвир: This image demonstrates the flexible arm installation, showing two different configurations: one with a maximum extension of 41cm and another with a maximum extension of 64cm, suitable for various desktop setups.

• Идоракунии кабелӣ:

  Utilize the integrated cable management clips along the arms and pole to route and conceal monitor cables, maintaining a tidy and organized workspace.

5. Нигоҳдорӣ

Нигоҳдории мунтазам дарозумрӣ ва кори бехатари стенди мониторро таъмин мекунад.

• Санҷишҳои даврӣ: Every few months, check all screws and connections to ensure they are tight. Re-tighten if necessary.
• Тозакунӣ: Стендро бо нарм пок кунед, гamp матоъ. Истифодаи тозакунакҳои абразивӣ ё маҳлулҳое, ки метавонанд ба марра зарар расонанд, худдорӣ намоед.
• Баҳори газ: The gas spring is designed for long-term use and generally does not require maintenance. If you notice a significant change in its performance, re-adjust the tension as described in the Operating Instructions.

6. Баррасии мушкилот

Агар шумо бо ягон мушкилот дучор шавед, ба мушкилот ва роҳҳои ҳалли маъмулии зерин муроҷиат кунед:

7. Мушаххасоти

8. Кафолат ва дастгирӣ

HUANUO provides a limited warranty for this product. For specific warranty terms, technical support, or to report missing/defective parts, please contact HUANUO customer service directly through their official webсайт ё фурӯшандае, ки маҳсулот харида шудааст.

Лутфан далели хариди худро барои даъвоҳои кафолат нигоҳ доред.