Дастури корбар Lutron LECL-153PH-LA X-10 Калиди Dimmer мувофиқ

Муқаддима

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Lutron LECL-153PH-LA X-10 Compatible Dimmer Switch. This device is designed to control incandescent, halogen, and certain fluorescent lighting loads up to 600 watts at 120 Volts, utilizing X-10 powerline communication for dimming and switching functions. Please read all instructions thoroughly before proceeding with installation or use.

Маълумоти муҳим оид ба бехатарӣ

• Огоҳӣ: Барои пешгирӣ аз сӯхтор, зарбаи барқ ​​ё марг, пеш аз васл кардани сим, барқро дар автомати муҳофизатӣ ё қуттии фишанг хомӯш кунед ва санҷед, ки барқ ​​хомӯш аст.
• Мувофиқи ҳама рамзҳои электрикии миллӣ ва маҳаллӣ насб кунед.
• This dimmer is for use with permanently installed incandescent, halogen, or compatible fluorescent fixtures only. Do not use with low-voltage lighting with a magnetic transformer, motor-driven appliances, or non-dimmable fluorescent fixtures.
• Танҳо барои истифодаи дохилӣ.
• Агар шумо ба ягон қисми ин дастурҳо боварӣ надошта бошед, ба электрики ботаҷриба муроҷиат кунед.

Мундариҷаи баста

• Lutron LECL-153PH-LA X-10 Compatible Dimmer Switch (Light Almond)
• Mounting Screws (typically included)
• Wire Connectors (typically included)
• Дастури таълимӣ (ин ҳуҷҷат)

Тасвир: Пеш view of the Lutron LECL-153PH-LA X-10 Compatible Dimmer Switch in Light Almond color, showing the rocker switch and slide dimmer control.

Мушаххасоти

Насб (Танзим)

This dimmer is an X-10 compatible device. Proper installation requires understanding of both standard electrical wiring and X-10 addressing. If you are unfamiliar with X-10 systems, please consult an X-10 expert or a qualified electrician.

Воситаҳои зарурӣ:

• Бургирандаҳо (Филипс ва ҳамвор)
• Стриптерҳо
• Лентаи электрикӣ
• Ҷилдиtagсанҷанда

Дастурҳои пайвастшавӣ:

1. Хомӯш кардани барқ: Locate the circuit breaker or fuse that controls the light switch you are replacing. Turn it OFF. Verify power is off at the switch box using a voltagсанҷанда
2. Калиди мавҷударо хориҷ кунед: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch.
3. Муайян кардани симҳо:
   • Line/Hot Wire: Қувваро аз автомати муҳофизатӣ интиқол медиҳад.
   • Сими боркунӣ: Connects to the light fixture.
   • Сими бетараф: (If present, typically white) Not always required for dimmers, but check dimmer specifications.
   • Сими заминӣ: (Bare copper or green) Connects to the metal electrical box or ground wire bundle.
   • Симҳои сайёҳӣ: (For 3-way installations, typically red or black) Connects between two switches controlling the same light.
4. Connect the Dimmer:
   • Пайваст кунед сими замин from the wall box to the green or bare copper wire on the dimmer.
   • Пайваст кунед Line/Hot wire to the designated Line terminal on the dimmer.
   • Пайваст кунед Сим бор кунед to the designated Load terminal on the dimmer.
   • For 3-way installations, connect the traveler wires to the appropriate traveler terminals on both the dimmer and the companion switch. Refer to the specific wiring diagram provided with your dimmer for 3-way configurations.
   • Ensure all wire connections are secure using wire connectors.
5. Set X-10 Address: Before mounting, set the X-10 House Code and Unit Code on the dimmer. This is typically done via small rotary switches or dip switches on the dimmer module. Refer to the specific instructions on the dimmer itself or a separate X-10 setup guide for your system.
6. Кӯҳи Диммер: Carefully fold the wires into the wall box and secure the dimmer to the box with the provided screws.
7. Плитаи деворро насб кунед: Лавҳаи деворро пайваст кунед.
8. Барқарор кардани қудрат: Қувваи барқро дар автомати автоматӣ аз нав фаъол созед.

Амалиёт

The Lutron LECL-153PH-LA dimmer switch offers both manual control and X-10 powerline control.

Назорати дастӣ:

• Даргир/хомӯш: Барои фурӯзон ё хомӯш кардани чароғҳо тугмаи рокерро зер кунед.
• Дилтангӣ: Use the vertical slide control to adjust the light level. Slide up to brighten, slide down to dim.

X-10 Control:

Once the X-10 House Code and Unit Code are set, the dimmer will respond to X-10 commands sent over the powerline from an X-10 controller (e.g., a remote, wall-mounted keypad, or computer interface). Common X-10 commands include:

• "ON": Turns the light on to the last set dim level or full brightness.
• "OFF": Чароғро хомӯш мекунад.
• "BRIGHT": Gradually brightens the light.
• "DIM": Gradually dims the light.

Refer to your X-10 system's documentation for specific programming and command details.

Нигоҳдорӣ

• Тозакунӣ: Барои тоза кардани диммер, бо матои нарм, d пок кунедamp cloth. Do not use chemical cleaners or abrasive materials.
• Қисмҳои аз ҷониби корбар хидматшаванда нест: Дар дохили диммер қисмҳои барои таъмир мувофиқ мавҷуд нестанд. Кӯшиш накунед, ки дастгоҳро кушоед ё таъмир кунед.

Мушкилкушо

Кафолат ва дастгирӣ

This Lutron product is covered by a warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lutron website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Lutron customer service directly.

Лутрон Webсайт: www.lutron.com