1. Муқаддима
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Дастурҳои умумии бехатарӣ
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Бехатарии минтақаи корӣ: Майдони корро тоза ва равшан нигоҳ доред. Ҷойҳои бесарусомон ё торик ба садамаҳо даъват мекунанд. Асбобҳои барқиро дар муҳити тарканда, масалан, дар ҳузури моеъҳои оташгиранда, газҳо ё чанг истифода набаред.
- Бехатарии барқ: Аз тамоси бадан бо сатҳи заминӣ ё заминӣ, аз қабили қубурҳо, радиаторҳо, диапазонҳо ва яхдонҳо худдорӣ кунед. Агар бадани шумо ба замин пайваст ё ба замин пайваст бошад, хатари зарбаи барқ зиёд мешавад.
- Бехатарии шахсӣ: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Истифодаи асбоб ва нигоҳубин: Асбоби барқиро маҷбур накунед. Асбоби барқии мувофиқро барои барномаи худ истифода баред. Он корро бо суръати мувофиқ беҳтар ва бехатартар анҷом медиҳад. Пеш аз танзим, иваз кардани лавозимот ё нигоҳ доштани асбобҳои барқӣ, батареяро аз асбоби барқӣ ҷудо кунед.
- Истифода ва нигоҳубини бастаи батарея: Танҳо бо пуркунандаи барқе, ки истеҳсолкунанда нишон додааст, пур кунед. Пуркунандаи барқе, ки барои як намуди батарея мувофиқ аст, ҳангоми истифода бо батареяи дигар метавонад хатари сӯхторро ба вуҷуд орад. Асбобҳои барқро танҳо бо батареяҳои махсус таъиншуда истифода баред.
3. Маҳсулот ба охир расидview ва Хусусиятҳо
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Натиҷаи моменти баланд: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Назорати суръати тағирёбанда: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Равшании ҳамгирошудаи LED: Three power LEDs provide optimal illumination of the work area.
- Тарҳрезии эргономикӣ: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Сохтмони устувор: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Клипи камарбанд: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Танзимот
4.1 Battery Installation (Battery and Charger Sold Separately)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- To remove the battery, press the release button(s) on the sides of the battery pack and slide it out.
4.2 Bit Insertion and Removal
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Дастурҳои истифодабарӣ
5.1 Фаъолсозӣ/хомӯшкунӣ ва назорати суръат
- Сар кардан: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Танзими суръат: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Барои қатъ: Калиди ON/OFF-ро раҳо кунед.
5.2 Самти гардиш
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Гардиши ба пеш (бо печондан): Push the selector switch to the left.
- Гардиши баръакс (Печондан): Push the selector switch to the right.
- Мавқеи қулф: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Нигоҳдорӣ
Нигоҳубини мунтазам мӯҳлати хизмати дарозмуддат ва кори беҳтарини драйвери зарбазании шуморо таъмин мекунад.
- Тозакунӣ: Пас аз ҳар истифода, корпуси асбобро бо матои нарм тоза кунедamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
- Нигоҳдорӣ: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Санҷиш: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Баррасии мушкилот
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Восита оғоз намешавад. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Қувваи кам ё иҷрои. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Лампаро бехатар нигоҳ намедорад. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Бренд | Эйнҳелл |
| Рақами модел | TE-CI 18/1 Li Solo (4510034) |
| Манбаи нерӯ | Battery Powered (18V Power X-Change) |
| Суръати максималии гардиш | 2300 чархзании |
| Моменти максималӣ | 140 Нютон метр |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Ҷилдиtage | 18 вольт |
| Вазни ашё | 1.18 килограмм (2.58 фунт) |
| Андозаҳои маҳсулот | 7.8"L x 3.03"W x 6.65"H |
| Материал | Rubber, Aluminium |
| Компонентҳои дохилшуда | Akku-Schlagschrauber (Impact Driver Body Only) |
| Батареяҳо дохил карда шудаанд? | Не |
| Батареяҳо лозиманд? | Yes (18V Lithium Ion) |
9. Кафолат ва дастгирӣ
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webсайт.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
