Skytech 9800332 TS/R-2 Wireless Wall Mounted LCD Fireplace Remote Control Thermostat

Муқаддима

The Skytech 9800332 TS/R-2 system is designed to provide a safe, reliable, and user-friendly remote control solution for gas heating appliances. This manual will guide you through the installation, operation, and maintenance of your new wireless thermostat system.

Маълумоти муҳим оид ба бехатарӣ

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in property damage, personal injury, or death. Keep this manual for future reference.

• Агар шумо боварӣ надошта бошед, боварӣ ҳосил кунед, ки ҳамаи васлкунии симҳо аз ҷониби мутахассиси соҳибихтисос анҷом дода мешавад.
• Always turn off the gas supply to the appliance before performing any installation or maintenance.
• Do not expose the remote control or receiver to water or extreme temperatures.
• Replace batteries regularly to ensure proper operation and prevent leakage.
• This system is intended for use with gas heating appliances only.

Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ашё дар бастаи шумо мавҷуданд:

• Интиқолдиҳанда (Идоракунии дурдаст)
• Қуттии қабулкунанда
• Клипи девор
• Плитаи девор
• Дастурҳои насб
• Batteries (for transmitter and receiver)
• Temperature Sensor (integrated into the transmitter)

Маҳсулот ба охир расидview

The Skytech 9800332 TS/R-2 is a wireless, wall-mounted thermostat system designed for convenient control of your fireplace. It features a clear LCD display and simple three-button operation.

Расми 1: Skytech 9800332 TS/R-2 Wireless Thermostat. The unit features an LCD screen displaying '72°F' and 'ROOM SET TEMP', with 'SKYTECH' branding below. At the bottom are three buttons: an 'ON' arrow button, a 'SET' button, and an 'OFF' arrow button.

Хусусиятҳои асосӣ:

• 3-Button On/Set/Off wall mounted thermostat with LCD display
• LCD displays room and thermostat set temperature in °F or °C
• Battery powered receiver box with learn function and On/Remote/Off slider switch
• Receiver can be installed in wall, on the hearth or under the fireplace behind the control access panel
• Lighted display for easy viewing
• Нишондиҳандаи пасти батарея

Насб ва насб

1. Насби батарея

Install the provided batteries into both the transmitter (remote control) and the receiver box. Ensure correct polarity.

2. Ҷойгиркунии қабулкунанда

The receiver box can be installed in various locations:

• Inside the wall (using the wall plate)
• On the hearth
• Under the fireplace, behind the control access panel

Ensure the receiver is placed in a location where it can receive signals from the transmitter and is not exposed to excessive heat.

3. Васл кардани симҳои қабулкунанда

Connect the receiver to your gas heating appliance's control valve according to the appliance manufacturer's instructions. Typically, this involves connecting two low-voltage wires from the receiver to the appliance's millivolt or 24V control terminals. Consult a qualified technician if you are unsure about wiring.

4. Pairing (Learn Function)

Барои барқарор кардани алоқа байни интиқолдиҳанда ва қабулкунанда:

1. Тугмаи "LEARN"-ро дар қуттии қабулкунанда пайдо кунед.
2. Press and hold the "LEARN" button until you hear a beep or see an indicator light flash.
3. Within 20 seconds, press any button on the transmitter.
4. The receiver will beep or flash again to confirm successful pairing.

Test the connection by pressing the ON/OFF buttons on the transmitter.

Дастурҳои амалиётӣ

1. Фаъол/хомӯш

• To turn the fireplace ON, press the ON (Up Arrow) тугмаи оид ба интиқолдиҳанда.
• To turn the fireplace OFF, press the OFF (Down Arrow) тугмаи оид ба интиқолдиҳанда.

2. Муқаррар кардани ҳарорат

The LCD displays both the current room temperature and the set temperature.

1. -ро пахш кунед САТ button once. The set temperature will flash.
2. -ро истифода баред ON (Up Arrow) or OFF (Down Arrow) тугмаҳо барои танзими ҳарорати дилхоҳ.
3. пахш кунед САТ again to confirm, or wait a few seconds for the setting to automatically save.

3. Switching Between °F and °C

Барои тағир додани воҳиди намоиши ҳарорат:

• With the display showing the room temperature, press and hold the САТ button for approximately 5 seconds until the unit changes.

4. Receiver Slider Switch

The receiver box has a slider switch with three positions:

• ДАР БОРАИ: Manually turns the fireplace ON, bypassing the remote control.
• ДУР: Allows the fireplace to be controlled by the wireless transmitter. This is the standard operating position.
• OFF: Manually turns the fireplace OFF, bypassing the remote control.

Нигоҳдорӣ

Иваз кардани батарея

When the low battery indicator appears on the LCD, or if the system becomes unresponsive, replace the batteries in both the transmitter and receiver. Use fresh alkaline batteries of the specified type (refer to specifications). Dispose of old batteries responsibly.

Тозакунӣ

Wipe the surfaces of the transmitter and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.

Мушкилкушо

Мушаххасоти

Кафолат ва дастгирӣ

For warranty information and technical support, please refer to the documentation included with your purchase or contact SkyTech customer service directly. Keep your proof of purchase for warranty claims.

Истеҳсолкунанда: Skytech