Муқаддима
The Alto Professional TS310 is a 2000-watt 10-inch 2-way powered PA speaker designed for professional audio applications. This manual provides essential information for the safe and effective use of your TS310 speaker, covering setup, operation, maintenance, and troubleshooting.
The TS310 features a powerful 2000-watt peak (1000-watt continuous) amplifier, a 10-inch low-frequency driver, and a 1.4-inch horn-loaded high-frequency driver with a precision waveguide. It includes an integrated 2-channel mixer, comprehensive contour control, and various positioning options for versatile deployment.
Figure 1: Alto Professional TS310 Powered PA Speaker, front view.
Маълумот оид ба бехатарӣ
Before operating your TS310 speaker, please read and understand all safety instructions. Retain this manual for future reference.
- Бехатарии барқ: Always connect the speaker to a grounded power outlet. Do not defeat the safety purpose of the polarized or grounding-type plug.
- Сими барқ: Сими барқро аз роҳ рафтан ё фишурдан, махсусан дар розеткаҳо, розеткаҳои қулай ва нуқтае, ки онҳо аз дастгоҳ мебароянд, муҳофизат кунед.
- Об ва намӣ: Ин дастгоҳро дар наздикии об истифода набаред. Ба пошидан ё пошидан дучор нашавед.
- Гармӣ: Дар наздикии ягон манбаъҳои гармӣ, аз қабили радиаторҳо, регистрҳои гармидиҳӣ, плитаҳо ё дигар дастгоҳҳо (аз ҷумла ampлифтҳо), ки гармӣ истеҳсол мекунанд.
- Вентилятсия: Вентилятсияи дурустро таъмин кунед. Ягон сӯрохиҳои вентилятсияро маҳкам накунед.
- Хизматрасонӣ: Ҳама хидматрасониро ба кормандони соҳибихтисос муроҷиат кунед. Хизматрасонӣ ҳангоме лозим аст, ки дастгоҳ бо ягон роҳ осеб дида бошад, масалан, сими таъминкунандаи барқ ё васлаки вайроншуда, рехтани моеъ ё ба дохили дастгоҳ афтодани ашё, зери борон ё намӣ дучор шудани дастгоҳ, ба таври мӯътадил кор намекунад. , ё партофта шудааст.
- Тозакунӣ: Танҳо бо матои хушк тоза кунед.
Вижагиҳо
The Alto Professional TS310 is engineered with advanced features for superior audio performance and versatility:
- Истеҳсоли нерӯи баланд: 2000W peak (1300W LF + 700W HF) active PA speaker with precision crossover and high-efficiency Class D ampосебдидагон.
- Optimized Drivers: Features a 10-inch (305 mm) LF driver with a 2.5-inch (76 mm) high-temperature voice coil and a 1.4-inch (35 mm) neodymium magnet HF driver with a precision waveguide.
- Миксери ҳамгирошуда: A 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs and independent level controls.
- Пайвастагии чандир: Includes an XLR Link output for connecting additional speakers.
- Sound Shaping: Equipped with a Contour EQ switch for quick sound adjustments and a Ground-Lift switch to eliminate hum.
- Монтажи универсалӣ: Lightweight cabinet design supports pole-mounting, wedge monitor positioning, bracket installation, or flown application with M6 suspension points.
Figure 2: Illustration of the 10-inch LF driver and 1.4-inch HF driver components.
Ташкил кардан
Proper setup ensures optimal performance and safety of your TS310 speaker.
1. Ҷойгиркунии ҷисмонӣ
The TS310 offers multiple placement options:
- Монтажи сутунҳо: Use a standard speaker pole stand. Ensure the stand is stable and rated for the speaker's weight.
- Wedge Monitor: Position the speaker on its side for use as a floor monitor.
- Насби кронштейн: Utilize M6 suspension points for fixed installations with appropriate brackets (sold separately).
- Flown Application: For suspended installations, consult a qualified professional to ensure safe rigging.
Figure 3: Various setup configurations including pole-mount, wedge monitor, and bracket installation.
2. Пайвастшавӣ
Refer to the rear panel diagram for connection points:
Figure 4: Rear panel controls and connections of the TS310.
- Пайвасти барқ: Connect the supplied power cable to the AC input on the rear panel and then to a grounded power outlet.
- Audio Inputs (Input 1 & Input 2): Use XLR or 1/4-inch TRS cables to connect your audio sources (e.g., mixer, microphone, instrument) to the dual combo inputs.
- XLR Link Output: Use an XLR cable to connect this output to the input of another powered speaker (e.g., another TS310) to expand your PA system.
Фаъолият
Follow these steps for basic operation of your TS310 speaker:
- Фаъол: Ensure all connections are secure. Turn on your audio sources first, then turn on the TS310 using the Power switch on the rear panel.
- Назорати овоз: Adjust the independent Level controls for Input 1 and Input 2 to set the desired volume for each source. Start with lower volumes and gradually increase.
- Contour EQ Switch: Engage this switch to apply a pre-set EQ curve that enhances bass and treble, often suitable for music playback. Disengage for a flatter frequency response, typically preferred for live vocals or instruments requiring precise mixing.
- Ground-Lift Switch: If you experience hum or buzzing, try engaging the Ground-Lift switch. This can help eliminate ground loop noise.
- Хомӯш: Before disconnecting power, turn off the TS310 first, then turn off your audio sources.
Нигоҳдорӣ
Regular maintenance helps prolong the life of your TS310 speaker:
- Тозакунӣ: Use a soft, dry cloth to clean the exterior of the speaker. Do not use solvents or abrasive cleaners.
- Гриль: Periodically check the front grille for dust or debris and gently clean if necessary to maintain optimal sound dispersion.
- Нигоҳдорӣ: When not in use, store the speaker in a dry, temperate environment, protected from dust and extreme temperatures.
- Санҷиш: Regularly inspect power cables and audio cables for any signs of damage. Replace damaged cables immediately.
Мушкилкушо
If you encounter issues with your TS310, refer to the following common problems and solutions:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Не қудрат | Power cable disconnected; Power outlet not active; Power switch off. | Ensure power cable is securely connected. Check power outlet with another device. Verify power switch is in the 'ON' position. |
| Садо нест | Input level too low; Audio source not sending signal; Damaged audio cable; Mixer output level too low. | Increase Input Level controls. Check audio source. Test with a different audio cable. Ensure mixer/source output is active. |
| Овози вайроншуда | Input level too high (clipping); Speaker volume too high; Damaged driver. | Reduce Input Level controls. Lower the overall volume. If distortion persists at low volumes, contact support. |
| Садои ғур-ғур ё ғур-ғур | Ground loop; Interference from other electronics. | Engage the Ground-Lift switch. Try connecting the speaker to a different power circuit. Move speaker away from other electronic devices. |
Мушаххасоти
Detailed technical specifications for the Alto Professional TS310:
- Модели: TS310
- Баромади барқ: 2000 Watts Peak (1300W LF + 700W HF)
- Ронандаи LF: 10-inch (305 mm), 2.5-inch (76 mm) high-temperature voice coil
- Ронандаи HF: 1.4-inch (35 mm) neodymium magnet with precision waveguide
- Ҷавоби басомад: 1 КГц (Note: This value typically represents a specific test point or a simplified representation, not the full frequency range.)
- Вурудоти аудио: 2 x XLR / 1/4-inch TRS combo inputs
- Натиҷаи аудио: 1 x XLR Link output
- Назоратҳо: Volume 1, Volume 2, Power switch, Contour EQ switch, Ground-Lift switch
- Монтаж: Pole-mountable, wedge monitor, bracket installation, M6 suspension points
- Андозаҳо (L x W x H): 20.6 x 11.8 x 12.6 инч (52.3 x 30.0 x 32.0 см)
- Вазни ашё: 26.4 фунт (11.98 кг)
- Манбаи нерӯ: Электри симдор
- Ранги: Сиёҳ
- Истеҳсолкунанда: inMusic Brands Inc
- UPC: 816311011754
Кафолат ва дастгирӣ
For detailed warranty information, please refer to the Safety & Warranty Manual included with your product. For technical support or service inquiries, please visit the official Alto Professional webсайт ё шӯъбаи хидматрасонии муштариёни онҳо тамос гиред.
An electronic version of the user manual can be found Ин ҷо.
