Дастури корбарии системаи назорати дастрасии биометрии PNI Finger 300

1. Муқаддима

The PNI Finger 300 is a robust biometric access control system designed for secure entry management. It integrates fingerprint recognition, password entry, and electromagnetic card reading capabilities to provide flexible and reliable access solutions. This manual provides essential information for the proper installation, operation, and maintenance of your device.

2. Хусусиятҳои маҳсулот

• Хонандаи изи ангушт: Supports up to 3000 fingerprint templates for secure biometric identification.
• Дастрасӣ ба корти RFID: Compatible with RFID cards, supporting memory for up to 30000 cards.
• Ворид кардани парол: Allows access using a numerical password.
• Access Control System Connection: Designed for integration with electromagnetic locks and access buttons.
• Интерфейсҳои коммуникатсионӣ: Features TCP/IP and RS485 for system integration.
• Тарҳрезии устувор: IP65 protection class for enhanced durability.

3. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳамаи ҷузъҳои дар поён овардашуда дар бастаи шумо мавҷуданд:

• PNI Finger 300 Identification Unit
• Лавозимоти васлкунӣ (винтҳо, вилкаҳои деворӣ)
• Дастгоҳи ноқилӣ
• Proximity Card (for testing/initial setup)

Image 3.1: PNI Finger 300 components including the main unit, mounting plate, wiring harness, and an RFID card.

4. Маҳсулот ба охир расидview

4.1 Панели Асосӣ

Тасвири 4.1: Пеш view of the PNI Finger 300 showing the keypad, fingerprint scanner, and status indicators.

The front panel features a numerical keypad for password entry, a fingerprint scanner for biometric identification, and LED indicators for status feedback (e.g., access granted/denied, power status).

4.2 Rear Panel and Wiring

Тасвири 4.2: Қафо view of the PNI Finger 300 with wiring connections and product labels.

The rear panel contains the wiring terminals for power, lock control, alarm, and communication interfaces. Refer to the detailed wiring diagram in Section 5.2 for connection instructions.

5. Танзим ва насб

5.1 Ҷойгиркунии дастгоҳ

1. Choose a suitable location for installation, ensuring it is secure and protected from extreme weather conditions if outdoors.
2. Use the provided mounting plate as a template to mark drilling points on the wall.
3. Сӯроҳҳоро парма кунед ва шамъҳои деворро гузоред.
4. Лавҳаи васлкуниро ба девор бо истифода аз винтҳо мустаҳкам кунед.
5. Attach the PNI Finger 300 unit to the mounting plate.

5.2 Диаграммаи васлкунӣ ва пайвастшавӣ

Carefully connect the wires according to the diagram on the rear panel and the following descriptions:

Ensure all connections are secure and correctly matched to avoid damage to the device or connected systems. Power should only be applied after all wiring is complete.

6. Дастурҳои истифодабарӣ

6.1 Initial Power-Up and Admin Setup

Upon first power-up, the system will typically be in an uninitialized state. Follow the manufacturer's specific instructions (usually involving a default admin password or a master card) to enter programming mode and set up the initial administrator.

6.2 Бақайдгирии корбар

To register new users, the system must be in programming mode (accessed by the administrator).

• Бақайдгирии изи ангушт: Place the user's finger on the scanner multiple times as prompted until the fingerprint is successfully enrolled.
• Бақайдгирии корт: Present the RFID card to the reader when prompted.
• Password Registration: Enter the desired numerical password using the keypad and confirm.

6.3 Дастрасӣ ба система

Once users are registered, they can gain access using their assigned method:

• Изи ангушт: Place a registered finger on the scanner.
• Корт: Present a registered RFID card to the reader.
• Рамз: Enter the registered password using the keypad, followed by the '#' key (or as specified by system configuration).

A successful access attempt will typically be indicated by a green LED and an audible signal, followed by the unlocking of the connected door.

7. Нигоҳдорӣ

• Тозакунӣ: Regularly clean the fingerprint scanner and keypad with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Ҳифзи муҳити зист: Ensure the device is protected from direct water exposure and extreme temperatures, even with its IP65 rating, to prolong its lifespan.
• Навсозии нармафзор: Check the PNI webбарои таъмини самаранокӣ ва амнияти беҳтарин, мунтазам аз сайт барои навсозиҳои дастраси нармафзор истифода баред.

8. Баррасии мушкилот

• Дастгоҳ фаъол нест: Verify the 12V DC power supply connection and ensure the power source is active. Check wiring for shorts or disconnections.
• Access Denied (Registered User): Ensure the fingerprint is placed correctly on the scanner, the card is presented properly, or the password is entered accurately. Re-enroll the user if issues persist.
• Кушода нашудани дар: Check the wiring to the electromagnetic lock. Ensure the lock itself is functioning correctly and receiving power. Verify the system's lock release settings.
• Клавиатура ҷавоб намедиҳад: Check for physical damage or debris. If the issue persists, a system reset or professional inspection may be required.

9. Мушаххасоти

10. Кафолат ва дастгирӣ

For warranty information, technical support, or service inquiries, please refer to the official PNI website or contact your authorized dealer. You can also visit the PNI Store on Amazon барои маълумоти иловагӣ оид ба маҳсулот ва захираҳои дастгирӣ.