Vitec MGW Ace Decoder HEVC/H.265 Hardware Decoder User Manual

1. Муқаддима

The Vitec MGW Ace Decoder is a professional-grade, high-performance IP decoding appliance. It supports HEVC/H.265 and H.264/AVC compression standards, offering efficient bandwidth utilization. Designed for field use, this portable device delivers high-quality video through industry-standard audio/video connectivity.

This manual provides essential information for the proper setup, operation, and maintenance of your MGW Ace Decoder.

2. Танзимот

2.1 Кушодан ва тафтиш

• Carefully remove the MGW Ace Decoder from its packaging.
• Verify that all components are present and undamaged. Contact your vendor immediately if any items are missing or damaged.

2.2 Дастгоҳ тамом шудview ва Пайвастшавӣ

The Vitec MGW Ace Decoder features various ports and indicators for operation. Refer to the image below for a view of the front panel connections and indicators.

Расми 1: Front panel of the Vitec MGW Ace Decoder. This view shows the Audio Talkback In/Out 3.5mm jacks, a USB port, and LED indicators for Power, Error, Decode, and HD status, along with a Reset button. The device has a distinctive blue and black casing with ventilation fins.

To set up your decoder:

1. Пайвасти барқ: Connect the provided power adapter to the DC input port (typically located on the rear panel) and then to a suitable power outlet.
2. Пайвасти шабакавӣ: Connect an Ethernet cable from your network switch or router to the Ethernet port (typically located on the rear panel) on the decoder.
3. Натиҷаи видео: Connect an HDMI cable from the decoder's HDMI output port (typically located on the rear panel) to your display device (monitor, TV, projector).
4. Audio Talkback (Front Panel): For two-way audio communication, connect a microphone or audio input device to the "IN" 3.5mm jack and headphones or an audio output device to the "OUT" 3.5mm jack.
5. USB (Front Panel): The USB port can be used for firmware updates or connecting external storage devices as needed.

3. Дастурҳои истифодабарӣ

3.1 Фаъолсозӣ ва оғози ибтидоӣ

1. After connecting all necessary cables, plug the power adapter into the electrical outlet.
2. Дар КУВВА LED on the front panel will illuminate green, indicating the device is receiving power.
3. Allow a few moments for the device to boot up.

3.2 Decoding IP Streams

The MGW Ace Decoder is designed to decode HEVC/H.265 and H.264/AVC IP streams. Configuration is typically performed via a web интерфейс.

1. Дастрасӣ Web Интерфейс: Кушодани а web browser and enter the IP address of the MGW Ace Decoder. (Refer to your network configuration or device documentation for the default IP address or how to discover it).
2. Даромадан: Номи корбар ва пароли худро ворид кунед.
3. Configure Stream: Navigate to the decoding settings. Input the source IP stream URL or parameters.
4. Start Decoding: Initiate the decoding process through the web интерфейс. Дар DECODE LED on the front panel should illuminate when a stream is actively being decoded.
5. Ҳолати монитор: Дар HD LED indicates if the decoded stream is High Definition. The ХАТО LED will illuminate red if a critical error occurs.

3.3 Using Audio Talkback

• Connect a microphone to the "IN" jack and headphones to the "OUT" jack on the front panel.
• Configure talkback settings via the device's web interface to enable and adjust audio levels.

4. Нигоҳдорӣ

• Тозакунӣ: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and debris.
• Навсозии нармафзор: Periodically check the Vitec website for firmware updates. Follow the provided instructions carefully for any update procedures.
• Вентилятсия: Ensure the device is placed in a well-ventilated area to prevent overheating. Do not block the ventilation fins.

5. Баррасии мушкилот

If problems persist, contact Vitec technical support.

6. Мушаххасоти

7. Кафолат ва дастгирӣ

For detailed warranty information, please refer to the warranty card included with your product or visit the official Vitec website. Technical support can be accessed through the Vitec support portal or by contacting their customer service department. Please have your product model and serial number ready when seeking support.

Vitec Official Webсайт: www.vitec.com