1. Муқаддима
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Pedrollo MC series electric pump. Please read this manual thoroughly before installation or operation to ensure proper use and to prevent damage or injury.
The Pedrollo MC series electric pumps are robust units constructed from cast iron, featuring a BICANALE impeller. This design enables the pump to effectively handle liquids containing suspended solid bodies and short fibers, making them ideal for conveying waste, sewage, mixed mud water, and groundwater in domestic, civil, and industrial applications.
Figure 1: Pedrollo MC 40/50-F Electric Pump. This image displays the robust cast iron construction of the pump, highlighting its compact design and the outlet flange for connection to the piping system. The top features two lifting rings for easy handling.
2. Маълумот оид ба бехатарӣ
Always adhere to the following safety precautions to prevent personal injury or damage to the pump:
- Ensure the pump is disconnected from the power supply before any installation, maintenance, or repair work.
- Installation and electrical connections must be performed by qualified personnel in accordance with local regulations and standards.
- Do not operate the pump dry. Ensure the pump is fully submerged in the liquid it is designed to handle before starting.
- Protect the power cable from sharp edges, heat, and oil. Do not use the cable to lift or move the pump.
- Wear appropriate personal protective equipment (PPE) such as gloves and eye protection during installation and maintenance.
- The pump is designed for specific liquid types (sewage, waste water). Do not use it for flammable, corrosive, or explosive liquids.
- Ensure proper grounding of the electrical system.
3. Танзим ва насб
Насби дурусти насос барои кори дарозмуддат ва самаранокии он муҳим аст.
3.1 Кушодан ва тафтиш
Carefully remove the pump from its packaging. Inspect for any visible damage that may have occurred during transit. Report any damage to the supplier immediately.
3.2 Ҷойгиршавӣ ва ҷойгиркунӣ
- The pump must be installed in a well-ventilated area, protected from freezing temperatures.
- Ensure the pump is placed on a stable, level surface or suspended securely if using a lifting chain.
- Allow sufficient space around the pump for ventilation and future maintenance access.
3.3 Piping Connections
- Connect the discharge pipe to the pump's outlet flange. Ensure all connections are watertight and sealed properly to prevent leaks.
- Use pipes of adequate diameter to minimize friction losses and ensure efficient flow.
- Install a non-return valve (check valve) on the discharge line to prevent backflow when the pump stops.
- Consider installing a gate valve or ball valve on the discharge line for isolation during maintenance.
3.4 Пайвастшавӣ ба барқ
- Тафтиш кунед, ки таъминоти барқ voltage (400V, 50Hz) matches the pump's requirements.
- Connect the pump to a dedicated electrical circuit protected by a residual current device (RCD) and appropriate circuit breakers.
- Ensure proper grounding. The pump is equipped with a grounding wire that must be connected to the system's ground.
- Consult the wiring diagram provided with the pump for specific connection details.
4. Дастурҳои истифодабарӣ
4.1 Санҷиши пеш аз амалиёт
- Confirm all piping connections are secure and leak-free.
- Ensure the pump is fully submerged in the liquid to be pumped.
- Verify that the power supply is connected correctly and safely.
4.2 Ба кор андохтани насос
Once all checks are complete, switch on the power supply to the pump. The pump should start operating smoothly. Monitor the initial operation for any unusual noises or vibrations.
4.3 Қатъи насос
To stop the pump, simply switch off the power supply. If the pump is controlled by a float switch, it will automatically stop when the liquid level drops below a certain point.
4.4 Фаъолияти пайваста
The Pedrollo MC series pumps are designed for continuous duty within their specified operating limits. Avoid operating the pump outside these limits to prevent overheating or premature wear.
5. Нигоҳдорӣ
Regular maintenance ensures optimal performance and extends the pump's lifespan. Always disconnect power before performing any maintenance.
5.1 Routine Checks (Monthly)
- Inspect the power cable for any signs of damage or wear.
- Check for any unusual noises or vibrations during operation, which may indicate a problem.
- Ensure the pump chamber is free from excessive debris buildup that could impede impeller rotation.
5.2 Impeller and Casing Cleaning (Annually or as needed)
- Disconnect power and remove the pump from its installation.
- Насосро бодиққат кушоед casing (refer to service diagrams if available) and inspect the BICANALE impeller for any blockages or wear.
- Clean any accumulated debris from the impeller and pump casing.
- Reassemble the pump, ensuring all seals are correctly seated and fasteners are tightened.
5.3 Нигоҳдорӣ
If the pump is to be stored for an extended period, especially in cold climates, drain all liquid from the pump to prevent freezing damage. Store in a dry, protected environment.
6. Баррасии мушкилот
Ин бахш роҳҳои ҳалли масъалаҳои маъмулро пешниҳод мекунад. Барои мушкилоте, ки дар ин ҷо номбар нашудаанд, бо кормандони соҳибихтисос дар тамос шавед.
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Насос оғоз намекунад | Не таъминоти барқ Сарбории изофаи ҳароратӣ барҳам хӯрд Импеллер банд шуд | Пайвасти барқ ва барқгирандаро тафтиш кунед Allow motor to cool, check for cause of overload Disconnect power, clear obstruction from impeller |
| Pump runs but no water flow or low flow | Air in pump/piping Discharge pipe blocked Impeller worn or blocked Насос пурра зери об монда нашудааст | Bleed air from system Тоза кардани басташавӣ Disconnect power, inspect and clean impeller Боварӣ ҳосил кунед, ки насос ба таври кофӣ зери об мондааст |
| Pump makes excessive noise | Cavitation (air in liquid) Bearing wear Foreign object in pump | Ensure adequate liquid supply, check for leaks in suction Бо кормандони баландихтисоси хидматрасонӣ тамос гиред Disconnect power, inspect and remove object |
| Pump trips circuit breaker | Хатогии барқӣ Аз ҳад зиёди мотор Импеллер банд шуд | Ба электрик маслихат кунед Check for blockages, ensure pump is not running dry Disconnect power, clear obstruction |
7. Мушаххасоти
Technical data for the Pedrollo MC 40/50-F Electric Pump:
- Модели: MC 40/50-F
- Бренд: Педролло
- Қувва: 4 HP
- Ҷилдиtage: 400В
- Басомад: 50 Гц
- Навъи моеъ: Sewage, waste water, mixed mud water, groundwater
- Навъи импеллер: BICANALE
- Мавод: Оҳан
- Вазни ашё: 52.7 кг
- Истеҳсолкунанда: PEDROLLO
- ASIN: B07HMSHMJT
- Аввалин дастрас: 28 сентябри соли 2018
8. Кафолат ва дастгирӣ
For warranty information, please refer to the documentation provided with your purchase or contact your authorized Pedrollo dealer. For technical support or spare parts, please contact Pedrollo customer service or your local distributor. Ensure you have your pump's model number (MC 40/50-F) and serial number (if applicable) ready when contacting support.
Шумо метавонед маълумоти бештар ва тафсилоти тамосро дар расм пайдо кунед Педролло webсайт.
