Feit Electric OM60/SW/HK A19 Smart LED Light Bulb User Manual

Муқаддима

This manual provides instructions for the installation, setup, operation, and maintenance of your Feit Electric OM60/SW/HK A19 Smart LED Light Bulb. This smart bulb is designed to work with Apple HomeKit and Siri Voice Control, offering convenient lighting management without requiring a separate smart home hub for direct control. For remote access and advanced automations, an Apple Home Hub (Apple TV, iPad, or HomePod) is required.

Image: The Feit Electric A19 Smart LED Light Bulb illuminated, showcasing its soft white light output.

Маълумот оид ба бехатарӣ

• Хавфи зарбаи барқ: Always turn off power to the fixture before installing or removing the bulb.
• Истифодаи дарунӣ/берунӣ: This bulb is rated for outdoor use. Ensure the fixture is suitable for the environment.
• Мутобиқати Dimmer: This smart bulb is dimmable via the Apple Home app or Siri. Do not use with standard incandescent dimmer switches, as this may damage the bulb.
• Ҳарорати корӣ: Do not install in enclosed fixtures that restrict airflow, as this can shorten bulb life.
• Бартараф кардан: Лампаҳои LED-ро мувофиқи қоидаҳои маҳаллӣ нобуд созед. Онҳоро бо партовҳои умумии хонагӣ нобуд накунед.

Мундариҷаи баста

Бастаи шумо бояд ҷузъҳои зеринро дар бар гирад:

• 1 x Feit Electric OM60/SW/HK A19 Smart LED Light Bulb

Дастурҳои насб

1. Насби ҷисмонӣ

1. Ensure the power to the light fixture is turned off at the switch before installation.
2. Carefully screw the Feit Electric Smart LED Light Bulb into a standard E26 medium base socket.
3. Turn on the power to the light fixture. The bulb should illuminate.

2. Apple HomeKit Pairing

The bulb connects directly to your Apple device via Bluetooth. No separate hub is required for basic control.

1. -ро кушоед Барномаи Apple Home on your iPhone, iPad, or iPod touch (iOS 10.0.1 or later required).
2. -ро пахш кунед "+" icon in the upper right corner and select "Add Accessory".
3. -ро скан кунед Рамзи танзимоти HomeKit located on the bulb or its packaging. Follow the on-screen prompts to add the bulb to your Home app and assign it to a room.

Image: A smartphone screen showing the Apple Home app interface, used to control smart lighting in a living room setting.

3. Firmware Update (Important)

To ensure optimal performance and compatibility with the latest iOS versions, it is recommended to update the bulb's firmware using the Feit OTA app.

1. -ро зеркашӣ кунед "Feit OTA" app from the Apple App Store.
2. Ensure the smart bulb is powered on.
3. Open the Feit OTA app. Grant Bluetooth access permissions if prompted.
4. Гузариш ба "More" (bottom right corner) and select "EQUIPMENT UPGRADE GATT".
5. Select the desired light bulb from the list.
6. If a firmware update is available, select "UPDATE RIGHT NOW". Keep your phone screen active and do not leave the app during the update process to prevent interruption.
7. After the update is complete, you may need to repeat steps 3-6 if multiple updates are required. The app will indicate when no further updates are needed.
8. Once updated, return to the Apple Home app to confirm functionality. If issues persist, try resetting the bulb to factory settings (see Troubleshooting) and re-pairing.

4. Home Hub Setup for Remote Access

For control of your smart bulb when away from home, or for advanced automations and scheduling, an Apple Home Hub is required.

• Set up an Apple TV (4th generation or later), HomePod, or an iPad (running iOS 10 or later) as your Home Hub.
• Ensure your Home Hub device is connected to your home Wi-Fi network and signed in with the same Apple ID as your other HomeKit devices.
• Keep the Home Hub device powered on and connected to power to maintain remote access.

Дастурҳои амалиётӣ

1. Control with Apple Home App

Once paired, you can control your smart bulb directly from the Apple Home app:

• Фурӯзон/хомӯш кардан: Tap the bulb icon in the Home app.
• Дилтангӣ: Press and hold the bulb icon to access controls for brightness adjustment.
• Ҷадвалҳо ва автоматизатсияҳо: Use the Home app to create custom schedules for turning lights on/off or to set up automations based on time, location, or other HomeKit accessories.
• Гурӯҳбандӣ: Group multiple bulbs together to control them simultaneously.

2. Siri Voice Control

Use Siri on your iPhone, iPad, HomePod, or Apple Watch to control your smart bulb with voice commands:

• "Hey Siri, turn on the [Room Name] light."
• "Hey Siri, dim the [Light Name] to 50%."
• "Hey Siri, turn off all the lights."

Шарҳ: Direct control via Bluetooth has a limited range (approximately 75 feet) and may experience slight delays compared to Wi-Fi based smart devices. For consistent remote control and faster response times, ensure a Home Hub is properly configured.

Нигоҳдорӣ

• Тозакунӣ: Пеш аз тоза кардан, боварӣ ҳосил кунед, ки лампа хунук ва барқ ​​хомӯш аст. Бо матои нарм ва хушк пок кунед. Аз тозакунандаҳои моеъ ё абразивӣ истифода набаред.
• Нигоҳдорӣ: If storing the bulb, keep it in its original packaging in a cool, dry place.
• No user-serviceable parts are inside. Do not attempt to disassemble the bulb.

Мушкилкушо

Bulb Not Responding or Connecting

• Санҷиши нерӯ: Ensure the light fixture switch is on and the bulb is receiving power.
• Диапазони Bluetooth: If controlling directly, ensure your Apple device is within Bluetooth range of the bulb.
• Сикли барқ: Turn the light switch off for 10 seconds, then turn it back on. This can often resolve minor connectivity issues.
• Навсозии нармафзор: Verify that the bulb's firmware is up to date using the Feit OTA app (refer to Setup Instructions). Outdated firmware can cause connectivity problems.
• Аз нав танзимкунии лампа: To factory reset the bulb, turn it off for 1 second, then on for 1 second, repeating this cycle 5 times. The bulb will flash to indicate a successful reset. Then, attempt to re-pair with the Apple Home app.
• Home Hub Check: If using remote access, ensure your Apple Home Hub (Apple TV, iPad, or HomePod) is online, powered, and connected to the same network.

Delay in Response

• This bulb uses Bluetooth for direct control, which can sometimes introduce a slight delay compared to Wi-Fi devices. Ensure your controlling device is close to the bulb.
• A properly configured Apple Home Hub can improve response times, especially for automations and remote control.

Bulb Turns Soft White After Power Outage

• The bulb is designed to return to a default soft white state after a power interruption. This behavior cannot be changed.

Мушаххасоти

Image: Dimensional drawing of the A19 light bulb, indicating a height of 4.4 inches and a diameter of 2.4 inches.

Кафолат ва дастгирӣ

Маълумот дар бораи кафолат

This Feit Electric smart LED light bulb comes with a кафолати як сол аз рӯзи харид. Ин кафолат нуқсонҳои мавод ва коркардро ҳангоми истифодаи муқаррарӣ фаро мегирад.

For warranty claims or further assistance, please contact Feit Electric customer service.

Дастгирии муштариён

If you encounter any issues or have questions regarding your Feit Electric Smart LED Light Bulb, please contact:

• Почтаи электронӣ: info@feit.com
• Телефони ройгон: 1-866-326-BULB (1-866-326-2852)

Please have your model number (OM60/SW/HK) and proof of purchase ready when contacting support.