1. Муқаддима
The SSV Works WP-MRB3 is a compact, weatherproof media controller designed for various 12-volt applications, including UTVs, Jeeps, trucks, and boats. It integrates Bluetooth, AM/FM radio, and an auxiliary input, providing versatile audio control. The unit features a 2Ω stable amplifier with up to 200W output, capable of powering up to 8 speakers.
2. Мундариҷаи баста
Боварӣ ҳосил кунед, ки ҳама ашё дар баста мавҷуд аст:
- MRB3 Media Controller
- Hideaway Brain Unit
- Таҷҳизоти васлкунӣ
- Дастгоҳи ноқилӣ
- USB/3.5mm Aux Adapter
- Дастури дастурӣ
Расми 2.1: Барview of the MRB3 controller, hideaway brain, and wiring connections. This diagram illustrates the main components and their interconnections for installation.
Расми 2.2: The optional trim ring, which can be used for a finished look after installation.
3. Насбкунӣ
Proper installation is crucial for optimal performance and durability. It is recommended to have this unit installed by a qualified professional.
3.1 Ҷойгиркунии контроллер
- Choose a flat, secure surface for mounting the controller. The unit requires less than 1 inch of space behind the face for flush mounting.
- Ensure the chosen location allows for easy access to controls and visibility of the display.
- Use the provided mounting hardware to secure the controller.
3.2 Пайвастҳои ноқилӣ
The MRB3 is a two-piece stereo system consisting of a surface-mounted controller and a hideaway brain unit with a built-in amplifier. Refer to the wiring diagram (Figure 2.1) for detailed connections.
- Қувва: Connect the red wire to a switched 12V power source and the black wire to a reliable ground.
- Маърузачиён: Connect your speakers to the appropriate outputs on the hideaway brain unit. The 2Ω stable amplifier supports up to 8 speakers.
- Вуруди ёрирасон: Use the included USB/3.5mm aux adapter for external audio devices.
- Антенна: Connect an AM/FM antenna for radio reception.
Расми 3.1: Собиқample of the MRB3 controller installed flush within a vehicle's dashboard, demonstrating its compact and integrated appearance.
4. Амалиёт
The MRB3 controller features a backlit hyper-white LED display for clear visibility in various weather conditions.
Расми 4.1: The front panel of the MRB3 controller, showing the volume, track, mode, and power buttons, along with the LCD display.
4.1 Идоракунии асосӣ
- Тугмаи фурӯзон (⑂): Press and hold to turn the unit ON or OFF. A short press may mute/unmute or change source depending on context.
- Ҳаҷм (+/-): Барои танзими баландии овоз, тугмаҳои '+' ва '-'-ро истифода баред.
- Тугмаи режим: Press to cycle through available audio sources: Bluetooth, FM, AM, and Auxiliary Input.
- Play/Pause (▶‖): Controls playback for Bluetooth and Auxiliary sources.
- Track (⌃ / ⌄): Skips tracks forward or backward in Bluetooth mode. In radio mode, these buttons tune stations.
4.2 Пайвасткунии Bluetooth
- Turn on the MRB3 unit.
- -ро пахш кунед Режим button until 'Bluetooth' is selected on the display.
- Дар дастгоҳи мобилии худ Bluetooth-ро фаъол созед ва дастгоҳҳои дастрасро ҷустуҷӯ кунед.
- Select 'SSV Works MRB3' from the list to pair. A confirmation tone or message will indicate successful pairing.
4.3 Амали радиои AM/FM
- -ро пахш кунед Режим button to select 'FM' or 'AM'.
- -ро истифода баред Track buttons (⌃ / ⌄) to manually tune or seek radio stations.
- The unit supports 6 preset EQ options for sound customization.
4.4 Танзимоти аудио
The MRB3 offers bass, treble, balance, and fade capabilities. Consult the full instruction manual for detailed steps on accessing and adjusting these settings.
5. Нигоҳдорӣ
To ensure the longevity and performance of your SSV Works MRB3, follow these maintenance guidelines:
- Тозакунӣ: нармро истифода баред, гamp cloth to clean the controller's surface. Avoid abrasive cleaners or solvents that could damage the finish or display.
- Муҳофизати обу ҳаво: While the unit is weatherproof, avoid direct high-pressure water spray, especially on the connections. Ensure all covers and seals are properly in place after installation or maintenance.
- Пайвастшавӣ: Periodically check all wiring connections for corrosion or looseness, especially in harsh environments.
6. Баррасии мушкилот
If you encounter issues with your MRB3 unit, refer to the following common problems and solutions:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Не қудрат | Пайвасти сусти барқ, фишанги сӯхта, симкашии нодуруст. | Check power and ground connections. Inspect the fuse in the power line. Verify wiring against the diagram. |
| Садо нест | Speaker wires disconnected, volume too low, incorrect source selected, ampмасъалаи баландбардорӣ. | Check speaker connections. Increase volume. Ensure correct audio source (Bluetooth, FM/AM, Aux) is selected. |
| Bluetooth пайваст нест | Device not in pairing mode, previously paired device connected, interference. | Ensure MRB3 is in Bluetooth mode. Forget 'SSV Works MRB3' on your device and re-pair. Ensure no other device is connected. |
| Қабули сусти радио | Антенна пайваст нест, антенна вайрон шудааст, минтақаи сигнал заиф аст. | Check antenna connection. Ensure antenna is properly installed and undamaged. Try tuning in a different location. |
If the problem persists after attempting these solutions, contact SSV Works customer support for further assistance.
7. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Модели | MRB3 |
| Бренд | SSV кор мекунад |
| Сарчашмаҳои аудиоӣ | Bluetooth, AM/FM Radio, Auxiliary Input |
| AmpНатиҷаи lifier | 200 Watts Max (4-channel) |
| Импеданси баландгӯяк | 2Ω Stable |
| Ҷилдиtage | 12 вольт |
| Хусусиятҳои махсус | Weatherproof Design, Backlit LED Display, Bass/Treble/Balance/Fade Controls, 6 Preset EQ Options |
| Андозаҳои маҳсулот | 1.38 x 0.2 x 0.89 inches (Controller Face) |
| Вазни ашё | 2.6 фунт |
| Рейтинги бехатарӣ | Сертификатсияи DOT |
8. Мутобиқат
The SSV Works MRB3 is a universal unit designed for any 12-volt power system. It is suitable for a wide range of vehicles and applications, including:
- Side-by-Side (UTV) vehicles (e.g., Polaris RZR, Can-Am X3, Polaris Ranger, Kawasaki Teryx, Honda, Yamaha)
- Jeeps
- Мошинхои боркаш
- Киштиҳо
- Toy Haulers
- Campers
- Classic Automobiles (e.g., Karmann Ghia, Porsche 911, Jaguar E-Type, Chevy Corvette)
Расми 8.1: Example of a side-by-side vehicle, a common application for the MRB3.
Расми 8.2: Дигар собиқample of a side-by-side vehicle, highlighting the rugged environments the MRB3 is designed for.
Расми 8.3: A classic convertible car, demonstrating the MRB3's suitability for various automotive installations.
Расми 8.4: A classic sports car, illustrating the versatility of the MRB3 for different vehicle types.
9. Кафолат ва дастгирӣ
For specific warranty information regarding your SSV Works MRB3 Media Controller, please refer to the warranty card included with your product or visit the official SSV Works webсайт. Шартҳои кафолат одатан нуқсонҳои истеҳсолиро дар давраи муайян аз рӯзи харид фаро мегиранд.
If you require technical assistance, troubleshooting beyond this manual, or have questions about your product, please contact SSV Works customer support directly. Contact information can usually be found on the manufacturer's webсайт ё дар бастаи маҳсулот.
