HERTZ Cento Series CX690 6x9 Three-Way Coaxial Speakers Instruction Manual

1. Маҳсулот ба охир расидview

The HERTZ Cento Series CX690 is a three-way elliptical coaxial speaker designed for car audio systems. It features a 6x9 inch cone engineered for optimal performance, delivering balanced tone and power handling. These speakers are suitable for horizontal installations within a vehicle's sound system.

Хусусиятҳои асосӣ:

• Компонент: Three-Way Coaxial design.
• Конус: 6x9 inch semi-pressed paper elliptical cone (SPP-M) enhanced with Mica powder for an optimal balance of lightness and damping.
• Таваққуф: Wide rubber suspension for extended excursion and effective sound damping.
• Магнит: High-density flux ferrite magnet with low-carbon polar plates to minimize distortion at high power levels.
• Сабад: Metallic finish basket acoustically combined with a rubber magnet cover to dampen spurious vibrations.
• Твиттер: 40 mm (1.58 in.) dome tweeter for clear mid-high frequency reproduction.
• Supertweeter: 20 mm (0.8 in.) supertweeter for extended high-frequency response.

Расми 1: Пеш view of the HERTZ Cento Series CX690 speaker, showing the elliptical cone and central tweeter/supertweeter assembly.

Расми 2: Қафо view of the HERTZ Cento Series CX690 speaker, showing the magnet structure and connection terminals.

2. Танзим ва насб

Proper installation is crucial for optimal performance and longevity of your HERTZ CX690 speakers. It is highly recommended that installation be performed by a qualified car audio professional.

Қадамҳои насб:

1. Тайёрӣ: Disconnect the vehicle's battery to prevent electrical shorts. Identify the speaker mounting locations in your vehicle, typically in door panels or rear deck. Ensure the mounting depth and diameter are compatible with the CX690 speakers.
2. Removal of Old Speakers: Carefully remove any existing speakers from their mounting locations. Disconnect their wiring.
3. Монтаж: Position the CX690 speakers in the designated openings. Secure them using appropriate screws and mounting hardware. Ensure a snug fit to prevent vibrations and rattles.
4. Ноқил: Connect the speaker wires from your car's audio system to the terminals on the CX690 speakers. Pay close attention to polarity (positive to positive, negative to negative) to ensure correct phase and sound reproduction. If connecting to an aftermarket ampбардоред, пайравӣ кунед amplifier's wiring instructions.
5. Санҷиш: Before reassembling interior panels, reconnect the vehicle's battery and test the speakers with your car's audio system. Verify that sound is clear and coming from all installed speakers.
6. Бозсозӣ: Once confirmed operational, carefully reassemble any removed interior panels or grilles.

For detailed vehicle-specific installation guidance, consult your vehicle's service manual or a professional installer.

3. Дастурҳои истифодабарӣ

The HERTZ CX690 speakers are passive components of your car's audio system. Their operation is controlled by your vehicle's head unit (stereo) and any connected external ampосебдидагон.

Амалиёти асосӣ:

• Фаъол / Хомӯш: Баландгӯякҳо бо системаи аудиоии мошини шумо фурӯзон ва хомӯш мешаванд.
• Назорати овоз: Adjust the volume using your head unit's controls. Avoid excessively high volumes that cause audible distortion, as this can damage the speakers.
• Танзимоти аудио: Utilize your head unit's equalizer, balance, and fader controls to fine-tune the sound to your preference. Ensure the balance and fader are set appropriately for your vehicle's cabin.
• Интихоби манбаъ: Манбаи аудиои дилхоҳи худро (радио, CD, Bluetooth ва ғ.) тавассути дастгоҳи сарлавҳаи худ интихоб кунед.

For advanced audio adjustments, refer to the instruction manual of your car's head unit or ampлифер.

4. Нигоҳдорӣ ва нигоҳубин

To ensure the longevity and continued performance of your HERTZ CX690 speakers, follow these maintenance guidelines:

• Тозакунӣ: Панҷараҳо ва атрофи баландгӯякҳоро бо матои нарм ва хушк оҳиста тоза кунед. Барои ифлосии якрав, каме тоза кунед.amp cloth can be used, but ensure no moisture enters the speaker cone or internal components.
• Аз маводи кимиёвии сахт худдорӣ намоед: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the speaker materials.
• Ҳифзи муҳити зист: While the speakers are designed for automotive environments, avoid exposing them to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
• Санҷишҳои пайвастшавӣ: Periodically inspect the wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor sound quality or intermittent operation.
• Пешгирии зарари ҷисмонӣ: Be careful not to puncture or tear the speaker cones or surrounds. Avoid placing heavy objects on the speakers or grilles.

5. Баррасии мушкилот

If you encounter issues with your HERTZ CX690 speakers, refer to the following troubleshooting steps:

Мушкилот ва роҳҳои ҳалли умумӣ:

• Аз баландгӯякҳо садо нест:
  • Check if the car audio system is powered on and the volume is up.
  • Verify all wiring connections at the speakers and the head unit/amplifier are secure and correctly polarized.
  • Ensure the head unit's fader and balance settings are not set to one side or front/rear only.
  • -ро тафтиш кунед amplifier (if used) for power, protection mode, or blown fuses.
• Овози таҳрифшуда ё норавшан:
  • Сатҳи баландии садоро кам кунед. Таҳриф аксар вақт вақте рух медиҳад, ки ampлифтер ё блоки сар аз ҳад зиёд ронда шудааст.
  • Ноқилҳои суст ё занҷирҳои кӯтоҳро тафтиш кунед.
  • Inspect the speaker cones for any physical damage (tears, dents).
  • Adjust the equalizer settings on your head unit. Excessive bass or treble can cause distortion.
• Басс суст ё не:
  • Ensure speaker polarity is correct. Incorrect polarity can cause bass cancellation.
  • Check the bass boost or subwoofer level settings on your head unit or ampлифер.
  • Verify that the speakers are properly sealed in their mounting locations to allow for proper bass response.
• Овози фосилавӣ:
  • Inspect all wiring for loose connections or frayed wires that may be touching metal.
  • Check for any internal issues with the head unit or ampлифер.

If these steps do not resolve the issue, contact HERTZ customer support or a qualified car audio technician.

6. Мушаххасоти

7. Маълумот дар бораи кафолат

The HERTZ Cento Series CX690 speakers come with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official HERTZ webсайт. Барои даъвоҳои кафолат далели хариди худро нигоҳ доред.

8. Дастгирии муштариён

If you require further assistance, have questions about installation, operation, or troubleshooting that are not covered in this manual, please contact HERTZ customer support. You can typically find contact information on the official HERTZ webсайт ё дар бастаи маҳсулот.

When contacting support, please have your product model number (CX690) and proof of purchase readily available.