Дастури истифодабарии Vonets Mini WiFi Bridge VAP11N-300

1. Муқаддима

This manual provides detailed instructions for the setup, operation, and maintenance of your Vonets Mini WiFi Bridge VAP11N-300. This device is designed to provide flexible wireless networking solutions, functioning as a WiFi repeater, wireless bridge, or access point. Please read this manual thoroughly before use to ensure proper installation and optimal performance.

2. Маҳсулот ба охир расидview

2.1 Мундариҷаи баста

• Vonets Mini WiFi Bridge VAP11N-300 unit
• Ethernet cable (30cm with 1 male RJ45 port)
• USB/DC power cable (30cm)
• Дастури дастурӣ

2.2 Хусусиятҳои асосӣ

• Стандартҳои бесим: Supports WiFi 802.11b/g/n.
• Меъёри маълумот: То 300 Мбит/с.
• Басомад: 2.4 ГГц.
• Усулҳои корӣ: WiFi Repeater, WiFi Bridge (IP layer or MAC layer transparent transmission), WiFi AP hotspot.
• Порти Ethernet: One 10/100Mbps adaptive Ethernet port.
• Таъмини нерӯ: Ҷилди васеъtage DC5V-15V (typical 5V/2A), DC/USB optional powered mode.
• Конфигуратсия: VDNS virtual domain configuration technology for browser-based setup.
• Хусусиятҳои Smart: Automatic WiFi hotspot scanning, WiFi hotspot memory function (up to 100 hotspots), SSA signal strength detection.

2.3 Тарҳбандии дастгоҳ ва нишондиҳандаҳо

Расми 1: Пеш view of the Vonets VAP11N-300 showing the Ethernet port, USB power input, DC power input, Reset button, and LED indicators.

• Порти LAN (RJ45): Connects to wired devices or your network router.
• Вуруди барқи USB: For power supply via a USB port (e.g., from a computer or USB adapter).
• Вуруди қувваи DC: For power supply via a DC adapter (5V-15V).
• Тугмаи Reset: Барои барқарор кардани танзимоти пешфарзии завод истифода мешавад.
• Hotspot Connection Status Light (Blue): Indicates the status of the WiFi hotspot connection.
• Ethernet Cable Connection Light (Green): Indicates the status of the Ethernet cable connection.

3. Дастури насб

Follow these steps to set up your Vonets Mini WiFi Bridge.

1. Пайвасти барқ: Connect the device to a power source using either the USB power cable or a DC power adapter (5V-15V). Ensure only one power source is used at a time.
2. Пайвастагии ибтидоӣ: Connect the VAP11N-300 to your computer's Ethernet port using the provided Ethernet cable.
3. Access Configuration Interface:
   • Қувваи барқро дар дастгоҳ.
   • Your computer should automatically obtain an IP address from the VAP11N-300.
   • Кушодани а web браузер (масалан, Chrome, Firefox, Edge).
   • Дар сатри суроғаҳо, нависед vonets.cfg ё суроғаи пешфарзии IP (одатан 192.168.254.254) ва Enterро пахш кунед.
   • Log in using the default username and password (refer to the device label or included quick start guide for default credentials).
4. Конфигуратсия: Once logged in, you can configure the device for your desired operating mode (Repeater, Bridge, or AP). Detailed configuration steps are provided in Section 4.

Расми 2: Accessing the configuration interface via a web браузер.

4. Реҷаҳои корӣ

The VAP11N-300 supports multiple operating modes to suit various networking needs.

4.1 Ҳолати такрорӣ

In Repeater Mode, the device extends the coverage of an existing WiFi network. It receives the wireless signal from your main router and re-broadcasts it, effectively expanding your network's range.

Расми 3: Illustration of Repeater Mode, extending WiFi coverage from a router.

1. Access the configuration interface (as described in Section 3.1).
2. Navigate to the "Operation Mode" or "Working Mode" settings.
3. Select "Repeater Mode".
4. Scan for available WiFi networks and select your desired network.
5. Enter the WiFi password for your selected network.
6. Save the settings and reboot the device if prompted.
7. Once rebooted, the device will connect to your main WiFi network and extend its signal.

4.2 WiFi Bridge Mode (Ethernet to WiFi / WiFi to Ethernet)

In Bridge Mode, the VAP11N-300 acts as a converter, allowing wired devices to connect to a wireless network, or vice-versa.

• Ethernet to WiFi: Connects a wired network (e.g., from a router) to the VAP11N-300's Ethernet port, and the VAP11N-300 then broadcasts a WiFi signal.
• WiFi to Ethernet: Connects to an existing WiFi network and provides internet access to a wired device (e.g., IP camera, DVR, smart TV, gaming console) via its Ethernet port. This is the most common use case for this device.

1. Ба интерфейси конфигуратсия дастрасӣ пайдо кунед.
2. Select "Bridge Mode" (or "WiFi to Ethernet" / "Ethernet to WiFi" depending on the interface).
3. If using "WiFi to Ethernet", scan for and select your target WiFi network, then enter the password.
4. Connect your wired device to the VAP11N-300's Ethernet port.
5. Save settings and reboot.

4.3 AP Mode (Access Point)

In AP Mode, the VAP11N-300 converts a wired internet connection into a wireless network, allowing wireless devices to connect to it. This is useful for creating a new WiFi hotspot from a wired Ethernet source.

1. Ба интерфейси конфигуратсия дастрасӣ пайдо кунед.
2. Select "AP Mode".
3. Configure the SSID (network name) and password for your new WiFi network.
4. Connect the VAP11N-300's Ethernet port to a wired internet source (e.g., a modem or router's LAN port).
5. Save settings and reboot.

5. Сенарияҳои татбиқ

The Vonets VAP11N-300 is versatile and can be used in various situations:

• Connecting Wired Devices to WiFi: Ideal for IP cameras, DVRs, network printers, smart TVs, gaming consoles (PS3), industrial PLCs, and other devices that only have an Ethernet port but need wireless connectivity.
• Extending WiFi Coverage: Use as a repeater to eliminate WiFi dead zones in homes, offices, or outdoor areas.
• Creating a WiFi Hotspot: Convert a wired internet connection into a wireless access point for mobile devices.
• Мониторинги бесим: Suitable for remote video surveillance applications, connecting multiple cameras wirelessly to a recorder.

Расми 4: Examples of wireless monitoring setups using the VAP11N-300.

6. Баррасии мушкилот

If you encounter issues with your VAP11N-300, refer to the following common problems and solutions:

• Cannot Access Configuration Page:
  • Ensure the device is powered on and connected directly to your computer via Ethernet.
  • Verify your computer's network adapter is set to obtain an IP address automatically.
  • Кӯшиш кунед, ки дигарро истифода баред web браузер.
  • Reset the device to factory defaults using the reset button (refer to Section 2.3).
• No Internet Connection After Setup:
  • Check if the VAP11N-300 is successfully connected to your main WiFi network (blue LED indicator).
  • Ensure the correct WiFi password was entered during configuration.
  • Verify that your main router has an active internet connection.
  • If in Bridge Mode, ensure the wired device is properly connected to the VAP11N-300's Ethernet port.
• Суръати сусти пайвастшавӣ:
  • Ensure the VAP11N-300 is placed within optimal range of your main WiFi router.
  • Minimize physical obstructions (walls, large metal objects) between the VAP11N-300 and your router.
  • Барои халалрасонӣ аз дигар дастгоҳҳои 2.4 ГГц санҷед.
  • Ensure the VAP11N-300 is receiving adequate power.
• Device Disconnects Frequently:
  • This can sometimes be related to overheating. Ensure the device has proper ventilation and is not covered.
  • Check for firmware updates on the Vonets official webсайт.
  • Verify signal strength to the main WiFi network.
• Дастгоҳ гарм кор мекунад:
  • While some warmth is normal, excessive heat can affect performance and lifespan. Ensure the device is in a well-ventilated area. Avoid placing it in enclosed spaces.

7. Мушаххасоти

8. Нигоҳдорӣ

To ensure the longevity and optimal performance of your Vonets VAP11N-300:

• Тозакунӣ: Барои тоза кардани дастгоҳ матои мулоими хушкро истифода баред. Моеъҳои тозакунанда ё аэрозолҳоро истифода набаред.
• Вентилятсия: Ensure the device is placed in a well-ventilated area to prevent overheating. Avoid covering it or placing it in enclosed spaces.
• Таъмини нерӯ: Use only the recommended power supply (DC 5V-15V).
• Навсозии нармафзор: Periodically check the official Vonets webсайт барои навсозиҳои нармафзор барои беҳтар кардани самаранокӣ ва амният.
• Нигоҳдорӣ: Агар дастгоҳ барои муддати тӯлонӣ нигоҳ дошта шавад, онро аз барқ ​​ҷудо кунед ва дар ҷои хунук ва хушк нигоҳ доред.

9. Кафолат ва дастгирӣ

For technical support or warranty inquiries, please contact Vonets customer service.

• Дастгирии почтаи электронӣ: skyfoxcn@vip.163.com
• Истеҳсолкунанда: Shenzhen HouTian Network Communication Technology Co., Ltd.

Лутфан далели хариди худро бо мақсади кафолат нигоҳ доред.