1. Муқаддима
Thank you for choosing the STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level. This precision instrument is designed to project bright, clear green laser lines for various leveling and alignment tasks. This manual provides essential information for safe operation, proper setup, and effective use of your laser level. Please read it thoroughly before first use and keep it for future reference.
2. Маълумот оид ба бехатарӣ
Огоҳӣ: This is a Class 2 laser product. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at other people or reflective surfaces.
- Always operate the laser level in a safe manner, following all instructions in this manual.
- Do not attempt to modify or disassemble the laser level. This can cause serious injury and will void the warranty.
- Keep the laser level out of reach of children and untrained personnel.
- Ensure the work area is free from obstructions and potential hazards.
- Use only the specified battery type (AA alkaline batteries) and ensure correct polarity.
- Батареяҳоро хориҷ кунед, агар дастгоҳ барои муддати тӯлонӣ истифода нашавад, барои пешгирӣ кардани шоридан.
- Protect the device from extreme temperatures, moisture, and direct sunlight.
3. Мундариҷаи баста
Ҳангоми кушодан, лутфан санҷед, ки ҳамаи ашёҳои дар поён овардашуда мавҷуд ва осеб надидаанд:
- STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level
- Қуттии боркаши мулоим
- L-Bracket (Magnetic Mounting Bracket)
- 4 x батареяҳои ишқории АА
- Laser Target Plate (if included, often a small white plate)
- Дастури корбар (ин ҳуҷҷат)
Расми 1: Contents of the STANLEY FATMAX FMHT77586-1 package, including the laser level, carrying pouch, L-bracket, and batteries.
4. Маҳсулот ба охир расидview
The STANLEY FATMAX FMHT77586-1 is a robust and accurate cross line laser level designed for professional and DIY applications. Key features include:
- Green Laser Diode: Utilizes a 510-530 Nm Class 2 green laser for enhanced visibility.
- Wide Cross Line Projection: Projects a 150° wide cross line, offering extensive surface coverage.
- Self-Leveling System: Automatically levels within a 4° range in approximately 5 seconds.
- Қулфи маятник: Secures the pendulum during transport to prevent damage and allows for manual mode operation for angled lines.
- Пойгоҳи магнитӣ: Features a magnetic base for direct attachment to metal structures.
- Ҳолати қабулкунанда: A dedicated button activates receiver mode, extending the working range up to 50 meters with an optional laser receiver.
- Сохтмони устувор: Rubber-coated housing provides IP54 protection against dust and splashing water.
- Имконоти васлкунӣ: Equipped with 1/4" and 5/8" tripod threads for versatile mounting.
Расми 2: Профессори тарафfile of the laser level, showcasing its durable design.
5. Танзимот
5.1 Насби батарея
- Locate the battery compartment cover on the back or bottom of the laser level.
- Сарпӯшро тавассути лағжиш ё кушодани он кушоед.
- Insert 4 AA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Сарпӯши қисмати батареяро бехатар пӯшед.
5.2 Mounting the Laser Level
The FMHT77586-1 offers several mounting options:
- Сатҳи ҳамвор: Place the laser level directly on a stable, flat surface.
- Монтажи штатив: Attach the laser level to a tripod using the 1/4" or 5/8" thread on the bottom of the unit.
- Ҷойгиркунии магнитӣ: Use the included L-bracket to attach the laser level to metal surfaces. The L-bracket has strong magnets for secure attachment.
Расми 3: Laser level mounted using an L-bracket, projecting a horizontal line for alignment.
6. Дастурҳои истифодабарӣ
6.1 Powering On and Self-Leveling Mode
- Unlock the pendulum by sliding the lock switch to the unlocked position.
- Press the power button (usually marked with a power symbol) to turn on the laser level.
- The laser level will automatically begin self-leveling. This typically takes about 5 seconds.
- Once leveled, the laser lines will emit a steady green light. If the device is outside its 4° self-leveling range, the laser lines may flash or an indicator light may illuminate, signaling that the device needs to be repositioned.
6.2 Switching Laser Modes
Press the mode button (often marked with a laser symbol or 'M') to cycle through different laser line configurations:
- Horizontal Line Only
- Vertical Line Only
- Cross Line (Horizontal and Vertical)
Расми 4: Interacting with the control panel to select laser modes.
6.3 Manual Mode (Locked Pendulum)
To project angled lines, keep the pendulum locked. When the pendulum is locked, the self-leveling function is deactivated, and the laser lines can be projected at any angle. The laser lines may flash to indicate that it is in manual mode and not self-leveling.
6.4 Receiver Mode
For outdoor use or in bright conditions, activate receiver mode by pressing the dedicated receiver button (often marked with a signal icon). This increases the pulse rate of the laser, allowing it to be detected by an optional laser receiver for extended range (up to 50m). An indicator light will typically confirm receiver mode is active.
Расми 5: Laser level in operation, projecting precise green cross lines for measurement.
6.5 Хомӯш кардани барқ
To turn off the laser level, press the power button again. Always engage the pendulum lock before storing or transporting the device to protect the internal mechanism.
7. Нигоҳдорӣ
- Тозакунӣ: Wipe the laser level with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the laser apertures are clean for optimal beam clarity.
- Нигоҳдорӣ: Store the device in its carrying pouch in a dry, cool place, away from direct sunlight. Always engage the pendulum lock before storage.
- Нигоҳубини батарея: Remove batteries if the device will not be used for an extended period to prevent corrosion from battery leakage.
- Санҷиши калибрченкунӣ: Periodically check the calibration of your laser level. Refer to the full product manual or STANLEY FATMAX support for detailed calibration procedures if needed.
8. Баррасии мушкилот
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Хатҳои лазерӣ хира ё намоён нестанд. | Low batteries; dirty laser aperture; too much ambient light. | Replace batteries; clean laser aperture; use in lower light conditions or activate receiver mode with an optional receiver. |
| Хатҳои лазерӣ дурахшон мешаванд. | Device is outside its self-leveling range; pendulum is locked (manual mode). | Reposition the device on a more level surface; unlock the pendulum for self-leveling mode. |
| Дастгоҳ фаъол нест. | Batteries are dead or incorrectly installed; pendulum lock is engaged. | Replace batteries and check polarity; ensure pendulum is unlocked (for self-leveling mode). |
| Андозаҳои нодуруст. | Device is not level; calibration issue; unstable surface. | Ensure the device is within its self-leveling range; check calibration; place on a stable surface. |
9. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Рақами модел | FMHT77586-1 |
| Навъи лазерӣ | Green Diode Laser (510 - 530 Nm) |
| Синфи лазерӣ | Синфи 2 |
| Майдони корӣ | 30 m (50 m with receiver) |
| Дақиқӣ | ±3 мм дар 10 м |
| Диапазони худтанзимкунӣ | ±4° |
| Вақти худтанзимкунӣ | 5 сония |
| Манбаи нерӯ | 4 x батареяҳои ишқории АА |
| Муҳлати батарея | Approx. 5 hours (single line operation) |
| Муҳофизати воридшавӣ | IP54 (Муҳофизати чанг ва обпошӣ) |
| Риштаи васлкунӣ | 1/4" ва 5/8" |
| Андозаҳо (L x W x H) | 20 x 16 x 16 см (тақрибан) |
| Вазн | 1 кг (тақрибан) |
| Реҷаи корӣ | Automatic (Self-leveling) |
| Материал | Rubber, Magnetic |
10. Кафолат ва дастгирӣ
STANLEY FATMAX products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official STANLEY FATMAX webсайт. Квитансияи хариди худро ҳамчун далели харид нигоҳ доред.
For further assistance, please contact STANLEY FATMAX customer service.
