Ultimate Speed Portable Power Bank and Car Jump Starter

1. Муқаддима

Thank you for choosing the Ultimate Speed Portable Power Bank and Car Jump Starter. This versatile 2-in-1 device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for charging electronic devices. Please read this manual carefully before first use to ensure safe and optimal operation.

2. Маълумот оид ба бехатарӣ

WARNING: Improper use can lead to serious injury or damage to the device/vehicle.

• Always wear eye protection and gloves when working with batteries.
• Дастгоҳро ба борон, намӣ ё ҳарорати аз ҳад зиёд нагузоред.
• Аз дастрасии кӯдакон дур нигоҳ доред.
• Ҳангоми истифода вентилятсияи дурустро таъмин кунед.
• Do not short-circuit the jump starter clamps.
• Do not attempt to jump start a frozen or visibly damaged battery.
• This device is spark-proof, but always avoid contact with flammable materials.
• Disconnect the device from the vehicle battery immediately after jump-starting.

3. Мундариҷаи баста

Лутфан бастаро барои ҷузъҳои зерин тафтиш кунед:

• Ultimate Speed Portable Power Bank and Car Jump Starter
• 12V Jump Start Cable with clamps
• Micro USB Adapter for mobile phones/tablets
• Fabric Storage Case
• Acrylonitrile Butadiene Styrene (ABS) Plastic Case
• Пуркунанда (адаптери барқ)

Image: The Ultimate Speed jump starter with its complete set of accessories, including the jump start cables, USB charging cable, and power adapter.

4. Хусусиятҳо ва ҷузъҳои маҳсулот

The Ultimate Speed Jump Starter features a robust design and advanced technology for reliable performance.

• Функсияҳои 2-дар 1: Car jump starter and powerful power bank.
• Портҳои сершумор: Two USB output ports (1A/2A) and one Micro-USB input port (5V/1A).
• Чароғаки ҳамгирошудаи LED: With a blinking function for emergencies.
• Муҳофизати пешрафта: Built-in safeguards against reverse polarity, short circuit, and overload. Detects defective batteries and deep discharges for maximum user and electronic protection.
• Тарҳрезӣ аз шарораҳо: Enhances safety during connection.
• Батареяи LiFePO4: Powerful Lithium-Ion (Iron Phosphate) battery for high electronic efficiency (up to 90% usable capacity), long cycle stability, and very low self-discharge.
• Сатҳи лағжиш: Барои коркарди бехатар.
• Direct Start: Provides a high current pulse for immediate starting without long charging times.

Тасвир: Пеш view of the Ultimate Speed jump starter, showing the product label with model information and key specifications.

Тасвир: тараф view of the device, highlighting the USB output ports, Micro-USB input, 12V output, power button, and integrated LED flashlight.

5. Танзимот

5.1 Initial Charging of the Device

Before first use, fully charge the jump starter. Connect the provided charger to the Micro-USB input port on the device and plug it into a 230V mains outlet. The charging time is approximately 13.5 hours for a full charge. The charge status is indicated by individual start LEDs.

5.2 Checking Charge Level

Press the power button briefly to check the current charge level. The LEDs will illuminate to indicate the remaining battery capacity.

6. Дастурҳои истифодабарӣ

6.1 Ҷаҳиш ба кор андохтани мошин

This device is suitable for petrol engines up to 3.0 L displacement and diesel engines up to 2.0 L displacement.

1. Боварӣ ҳосил кунед, ки стартери ҷаҳиш ба қадри кофӣ пур карда шудааст.
2. Turn off the vehicle's ignition and all electrical accessories.
3. cl сурх (+) пайваст кунедamp of the jump start cable to the positive (+) terminal of the vehicle's battery.
4. Пайваст кардани сиёҳ (-) clamp of the jump start cable to a clean, unpainted metal part of the vehicle's engine block or chassis, away from the battery.
5. Connect the jump start cable's plug to the 12V output port on the jump starter.
6. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds.
7. Once the engine starts, immediately disconnect the jump start cable from the jump starter.
8. Сипас, сими сиёҳ (-)-ро ҷудо кунедamp from the vehicle, followed by the red (+) clamp.

Image: The Ultimate Speed jump starter connected to a car battery, demonstrating the proper clamp placement for jump-starting.

Сурат: Дигар view of the jump starter connected to a car battery, showing the compact size of the device in an engine bay.

6.2 Истифода ҳамчун бонки барқ

The device can charge mobile phones, tablets, and other USB-powered devices.

1. Connect your device's USB charging cable to one of the USB output ports (1A or 2A) on the jump starter.
2. Нӯги дигари кабелро ба дастгоҳи электронии худ пайваст кунед.
3. The jump starter will begin charging your device automatically.

Image: The jump starter being used as a power bank, charging a smartphone via its USB port.

6.3 Истифодаи чароғаки LED

Press and hold the power button to turn the LED flashlight on or off. Press the power button briefly while the flashlight is on to cycle through different modes (e.g., steady light, blinking light).

7. Нигоҳдорӣ

• Пуркунии барқ: To maintain battery health, recharge the jump starter every 3-6 months, even if not in use.
• Нигоҳдорӣ: Дастгоҳро дар ҷои хунук ва хушк, дур аз нури бевоситаи офтоб ва ҳарорати аз ҳад зиёд нигоҳ доред.
• Тозакунӣ: Дастгоҳро бо матои хушк ва мулоим тоза кунед. Моддаҳои кимиёвии сахт ё тозакунандаи абразивиро истифода набаред.

8. Баррасии мушкилот

9. Мушаххасоти

10. Кафолат ва дастгирӣ

For warranty claims or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Specific warranty terms and conditions may vary by region and retailer.