ZL-7918A Multifunction Automatic Temperature Humidity Controller

1. Муқаддима

The LILYTECH ZL-7918A is an advanced intelligent temperature and humidity controller designed for precise environmental management. It offers stable and reliable performance, making it ideal for applications such as incubators, climate chambers, and warehouses. This manual provides comprehensive instructions for the installation, operation, and maintenance of your ZL-7918A controller.

Figure 1: LILYTECH ZL-7918A controller with connected temperature and humidity sensors, showing the main unit and external probes.

2. Хусусиятҳои асосӣ

The ZL-7918A controller is equipped with a range of features to ensure optimal environmental control:

• Назорати ҳарорат: Precise management of heating elements.
• Назорати намӣ: Accurate regulation of humidity levels.
• Назорати равшанӣ: Manages illumination cycles.
• Гармидиҳии ёрирасон: Supports an additional heating output.
• Egg Turning Control: Configurable periods and durations for automatic egg turning (left and right).
• Timing Ventilation Control: Schedules ventilation cycles.
• Назорати ҳушдор: Alerts for deviations from set parameters.
• Калибрченкунии ҳарорат ва намӣ: Allows for sensor calibration to maintain accuracy.
• Hatching Day Display: Tracks and displays the number of hatching days (up to 99 days).

3. Танзим ва насб

3.1 Андозаҳои дастгоҳ ва насб

The ZL-7918A controller has a device size of 160x80x95 mm. The recommended installation drilling size for mounting is 151.5x76.5 mm.

3.2 Дастурҳо оид ба васлкунӣ

Proper wiring is crucial for the safe and correct operation of the controller. Refer to the wiring diagram below for connections. Ensure all connections are secure and follow local electrical codes.

Расми 2: Қафо view of the ZL-7918A controller, displaying the terminal block for electrical connections.

Figure 3: Detailed wiring diagram for the ZL-7918A controller, illustrating connections for power supply, sensors, and output loads.

Таъмини нерӯ: Connect AC100~240V 50/60Hz to terminals L and N (13 and 14).

Сенсорҳо:

• Сенсори намӣ: Connect the Red, Yellow, Black, and Orange wires to terminals 1, 2, 3, and 4 respectively.
• Сенсори ҳарорат: Connect to terminals 5 and 6.

Figure 4: ZL-SHr05A Humidity Sensor, showing its compact design and connection points. This sensor is designed for accurate humidity measurement within a range of 0-80% RH.

Назорати баромад: The controller provides 7 output controls. Ensure the load for heaters does not exceed 1500W, illumination does not exceed 100W, and humidity, fan, and egg turning outputs do not exceed 1A/250Vac.

• Фан: Terminals 15 (COM) and 16.
• Egg Turning Left: Terminals 15 (COM) and 17.
• Egg Turning Right: Terminals 15 (COM) and 18.
• Намӣ: Terminals 15 (COM) and 19.
• Illumination (Lamp): Terminals 15 (COM) and 20.
• Auxiliary Heater (HEAT2): Terminals 21 and 22.
• Main Heater (HEAT1): Terminals 23 and 24.

4. Амалиёт

4.1 Намоишview

Расми 5: Пеш view of the ZL-7918A controller, highlighting the digital display and control buttons for setting parameters.

The controller features a clear digital display showing current temperature (PV TEMP), set temperature (SV TEMP), current humidity (PV WET%), and set humidity (SV WET%). Indicator lights show the status of various outputs (FAN, HEAT1, HEAT2, UP, DOWN, WET, ALARM, L/R for egg turning).

4.2 Танзими параметрҳо

Use the "Set" button to enter the parameter setting mode and the arrow keys (Up/Down) to navigate and adjust values. The "Enter" button confirms selections.

• Диапазони танзими ҳарорат: 1 ~ 65 ℃
• Диапазони танзими намӣ: 10 ~ 80% RH
• Egg-Turning Control:
  • Period: 1~999 minutes
  • Turning Time: 0~999 seconds
  • Turning Times: 0~999 times
• Назорати вентилятсия:
  • Period: 1~999 minutes
  • Ventilating Time: 0~999 seconds
• Назорати равшанӣ:
  • Period: 1~999 minutes
  • Illuminating Time: 0~999 seconds

Refer to the detailed programming guide (not included in this general manual) for specific parameter codes and advanced settings.

5. Нигоҳдорӣ

To ensure the longevity and accuracy of your ZL-7918A controller, follow these maintenance guidelines:

• Тозакунӣ: Regularly wipe the controller's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Нигоҳубини сенсор: Keep the temperature and humidity sensors clean and free from dust or debris. Avoid exposing sensors to extreme physical shock or moisture beyond their operating limits.
• Пайвастшавӣ: Ҳама пайвастҳои ноқилҳоро мунтазам тафтиш кунед, то боварӣ ҳосил кунед, ки онҳо бехатар ва аз зангзанӣ нестанд.
• Калибрченкунӣ: If accuracy issues are suspected, perform temperature and humidity calibration as per the advanced settings guide.

6. Баррасии мушкилот

This section addresses common issues you might encounter with your ZL-7918A controller. For problems not listed here, please contact customer support.

7. Мушаххасоти техникӣ

8. Маълумот дар бораи кафолат

LILYTECH products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact LILYTECH customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.

9. Дастгирии муштариён

If you require further assistance or have questions regarding your ZL-7918A controller, please contact LILYTECH customer support. Contact details can typically be found on the product packaging or the official LILYTECH webсайт.

For technical inquiries, please have your product model (ZL-7918A) and a detailed description of the issue ready.