Дастури истифодабарии қабулкунаки гироскопии 7-каналии RC Radiolink R7FG

1. Муқаддима

The Radiolink R7FG is a 7-channel RC receiver designed for various remote-controlled vehicles, including crawlers, drifting cars, and boats. It features an integrated gyroscope for enhanced stability, real-time voltage telemetry, and a water-splash proof design (IPX4). This manual provides detailed instructions for setting up, operating, and maintaining your R7FG receiver.

Figure 1: Radiolink R7FG 7-Channel RC Gyro Receiver

2. Маълумот оид ба бехатарӣ

This product is not a toy. It is not suitable for children under 14 years of age. Always operate RC equipment responsibly and follow all safety guidelines provided by your vehicle's manufacturer.

• Пеш аз кор, боварӣ ҳосил кунед, ки ҳамаи пайвастҳо бехатаранд.
• Verify correct polarity when connecting power to avoid damage.
• Do not expose the receiver to extreme temperatures or direct sunlight for prolonged periods.
• While water-splash proof, avoid full submersion to prevent potential damage.

3. Дар қуттӣ чӣ мавҷуд аст

Ҳангоми кушодани бастаи худ, шумо бояд чизҳои зеринро пайдо кунед:

• 1x R7FG Receiver
• 1х Ҷилдиtagд Кабели телеметрй

4. Танзимот

4.1. Раванди пайвасткунӣ

The R7FG receiver features a convenient 'Push to Bind' function, eliminating the need for a bind plug or complex radio settings.

1. Интиқоли худро ба кор баред.
2. Connect power to the R7FG receiver.
3. Press and hold the bind button on the receiver for approximately 1 second. The LED indicator on the receiver will flash rapidly, indicating it is in binding mode.
4. Once the binding is successful, the LED on the receiver will turn solid green (Normal Mode) or solid red (Gyro Mode).

Figure 2: Location of the Bind Button on the R7FG Receiver

4.2. Дастури пайвастшавӣ

Proper connection of the receiver to your Electronic Speed Control (ESC) and battery is crucial for correct operation and telemetry functionality.

Figure 3: Standard Vehicle Power Connection

Figure 4: Vehicle Power and Voltage Telemetry Connection

Барои ҷtage telemetry, connect the included voltage telemetry cable between your vehicle's battery and the telemetry port on the R7FG receiver, as shown in Figure 4.

4.3. Gyro Mode Indication

The R7FG receiver's LED indicates its current operating mode:

• LED сабзи сахт: Normal Mode (Gyro function is off).
• LED сурхи сахт: Gyro Mode (Gyro function is active).

Figure 5: Green LED for Normal Mode, Red LED for Gyro Mode

5. Operating the R7FG Receiver

5.1. Real-time Telemetry

When connected to a compatible Radiolink transmitter (e.g., RC8X, RC6GS V2/V3, RC4GS V2/V3), the R7FG receiver can transmit real-time data back to your transmitter screen. This includes:

• Батареяи автомобил Ҷилдиtage: Helps prevent over-discharge and damage to your battery.
• RSSI Signal Strength: Indicates the strength of the radio signal, allowing you to monitor connection quality.

Расми 6: Мисample of Telemetry Data Displayed on a Compatible Transmitter

5.2. Integrated Gyro Function

The built-in gyroscope helps maintain the vehicle's stability and keeps it in a straight line, which is particularly useful for drifting and on-road cars. The gyro sensitivity can be adjusted directly from your compatible transmitter.

Figure 7: Visual representation of vehicle stability with and without gyro assistance.

5.3. Water-Splash Proof (IPX4)

The R7FG receiver is rated IPX4, providing protection against water splashes from any direction. This makes it suitable for use in environments where light moisture may be present, such as near puddles or in light rain. However, it is not designed for submersion.

Figure 8: R7FG receiver installed in an RC vehicle operating in a splash-prone environment.

6. Нигоҳдорӣ

To ensure the longevity and optimal performance of your R7FG receiver, follow these maintenance guidelines:

• Қабулкунакро тоза ва аз чанг ва партовҳо холӣ нигоҳ доред. Барои тоза кардан аз матои нарм ва хушк истифода баред.
• Regularly inspect all wiring and connectors for signs of wear or damage. Replace any damaged components immediately.
• Store the receiver in a dry, cool environment when not in use.
• Avoid exposing the receiver to strong vibrations or impacts.

7. Баррасии мушкилот

If you encounter issues with your R7FG receiver, consider the following common troubleshooting steps:

• No Power/LED Off: Check battery connections and ensure the battery is charged. Verify correct polarity.
• No Signal/Control: Re-perform the binding process. Ensure your transmitter is powered on and within range. Check for interference from other 2.4GHz devices.
• Назорати номунтазам: Check all servo and ESC connections. Ensure the receiver is securely mounted and not experiencing excessive vibration. Adjust gyro sensitivity if the issue is related to vehicle stability.
• Telemetry Not Displaying: Тасдиқ кардани ҷилдиtage telemetry cable is correctly connected to both the battery and the receiver's telemetry port. Ensure your transmitter supports telemetry display for the R7FG.

For more detailed troubleshooting or persistent issues, please refer to the online user instruction or contact Radiolink customer support.

8. Мушаххасоти

Figure 9: R7FG Receiver Dimensions and Key Specifications

9. Compatible Transmitters

The Radiolink R7FG receiver is compatible with a range of Radiolink transmitters, including:

• Радиолинк RC8X
• Radiolink RC6GS V3 (and V2)
• Radiolink RC4GS V3 (and V2)
• Радиолинк T8S
• Радиолинк T8FB
• Радиолинк T12D
• Радиолинк T16D

Расми 10: Зиёдview of compatible Radiolink transmitters.

10. Receiver Comparison

For comparison with other Radiolink receivers, refer to the table below:

Figure 11: Comparison of R7FG with other Radiolink receiver models.

11. Кафолат ва дастгирӣ

11.1. Маълумот дар бораи кафолат

Radiolink products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Radiolink customer service directly. Keep your proof of purchase for warranty claims.

11.2. Дастгирии муштариён

For technical assistance, troubleshooting, or any questions regarding your Radiolink R7FG receiver, please contact Radiolink customer support. You can find support information on the Radiolink Direct store or through their official website. Full user manuals and FAQ troubleshooting files are also available on product pages.

Маълумот барои тамос:

• Refer to the Radiolink Direct store on Amazon: Radiolink Store
• Consult online user instructions and FAQ files.