1. Муқаддима
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the MEAN WELL LPV-100-12 LED Driver. This unit is a constant voltage, single output, waterproof power supply designed for LED-related fixtures and appliances. It features a universal AC input and is fully encapsulated with an IP67 rating, making it suitable for various environments.
2. Дастурамал оид ба бехатарӣ
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Кормандони соҳибихтисос: Насб ва хидматрасонӣ бояд танҳо аз ҷониби кормандони баландихтисос анҷом дода шаванд.
- Қатъи барқ: Always disconnect power before installation, maintenance, or troubleshooting.
- Ноқилҳои дуруст: Ensure all wiring connections are secure and comply with local electrical codes. Incorrect wiring can cause damage or fire.
- Вентилятсия: Although IP67 rated, ensure adequate air circulation around the unit to prevent excessive heat buildup, especially when operating at maximum load.
- Мутобиқати бор: Do not exceed the specified output wattage or current. Overloading can damage the driver and connected devices.
- Шароити экологӣ: The IP67 rating indicates suitability for dry and damp locations. Avoid submerging the unit or exposing it to extreme temperatures outside its specified operating range.
3. Маҳсулот ба охир расидview
The LPV-100-12 is a robust LED driver designed for reliable performance in demanding conditions. Its compact form factor and waterproof design make it versatile for various applications.
Расми 3.1: Умуман view of the MEAN WELL LPV-100-12 LED Driver. This image displays the white rectangular housing with input (AC) and output (DC) wires, along with the product label.
Расми 3.2: Close-up of the product label on the LPV-100-12. The label details input voltage (100-240V~, 2.2A, 50/60Hz), output voltage (+12V === 8.5A), and various certifications including CE, cURus, and IP67.
Расми 3.3: Product label with the serial number highlighted. The serial number for this unit is GB95522023. This serial number can be used to obtain the Quality Control Inspection Report from MEAN WELL.
4. Танзим ва насб
Follow these steps for proper installation of the LPV-100-12 LED Driver.
- Монтаж: The unit is designed for wall mount installation. Secure the driver to a stable surface using appropriate fasteners. Ensure the mounting location allows for adequate heat dissipation.
- Input Wiring (AC):
- Пайваст кунед Brown (ACL) wire to the Live (L) AC input.
- Пайваст кунед Blue (ACN) wire to the Neutral (N) AC input.
- Ҳаҷми воридотtage range is 90 ~ 264VAC or 127 ~ 370VDC. Ensure your power source is within this range.
- Output Wiring (DC):
- Пайваст кунед Сурх (V+) wire to the positive (+) terminal of your 12VDC LED fixture.
- Пайваст кунед Сиёҳ (V-) wire to the negative (-) terminal of your 12VDC LED fixture.
- Ensure the total power consumption of the connected LED fixtures does not exceed 102 Watts (8.5 Amps at 12VDC).
- Изолятсия: After making all connections, ensure all exposed wires are properly insulated to prevent short circuits.
- Фаъол: Once all connections are secure and verified, apply power to the AC input.
5. Дастурҳои истифодабарӣ
The MEAN WELL LPV-100-12 is a constant voltage LED driver. Once properly installed and powered, it will provide a stable 12VDC output to the connected LED load.
- Фаъолияти худкор: The driver operates automatically when power is supplied. There are no user-adjustable controls.
- Мониторинги сарборӣ: Ensure the connected LED load remains within the driver's specified output limits (12VDC, 8.5A, 102W).
- Хусусиятҳои муҳофизатӣ: The unit includes built-in protections against short circuit, overload, and over voltage. In case of a fault, the driver may temporarily shut down to protect itself and the connected load. Remove the fault condition and cycle power to reset.
6. Нигоҳдорӣ
The LPV-100-12 LED Driver is designed for minimal maintenance due to its fully encapsulated, waterproof construction.
- Санҷиши мунтазам: Periodically inspect the driver and its wiring for any signs of damage, wear, or loose connections.
- Тозакунӣ: If necessary, gently clean the exterior of the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the unit is powered off before cleaning.
- Санҷиши экологӣ: Verify that the operating environment remains within the specified temperature range (-25~70℃) and that the IP67 rating is not compromised by physical damage.
7. Баррасии мушкилот
If you encounter issues with your LPV-100-12 LED Driver, refer to the following troubleshooting guide:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| No output from driver / LEDs not lighting up |
|
|
| Светодиодҳо милт-милт мекунанд ё хира мешаванд |
|
|
| Ронанда аз ламс гарм аст |
|
|
8. Мушаххасоти
Detailed technical specifications for the MEAN WELL LPV-100-12 LED Driver:
| Хусусият | Мушаххасоти |
|---|---|
| Рақами модел | LPV-100-12 |
| Вуруди ҷилдиtage | 90 ~ 264VAC or 127 ~ 370VDC |
| Фосилаи вуруд | 47 ~ 63Hz |
| Ҷараёни вуруд | 2.2A/115VAC, 1.2A/230VAC |
| Натиҷаи ҳаҷtage | 12VDC |
| Ҷараёни баромад | 8.5 Amps |
| Натиҷаи Ватtage | 102 Ватт |
| Самаранокӣ | Not specified in provided data, typical for constant voltagд ронандагон. |
| Муҳофизатҳо | Short Circuit, Overload, Over Voltage |
| Ҳарорати корӣ | -25 ~ 70℃ |
| Рейтинги ҳифзи воридшавӣ (IP). | IP67 (Fully encapsulated, suitable for dry and damp ҷойгоҳҳо) |
| Андозаҳо (L x W x H) | 7.48 x 2.05 x 1.46 инч (190 x 52 x 37 мм) |
| Вазни ашё | 0.16 унсия (тақрибан 4.54 г) |
| Навъи васлкунӣ | Монтажи девор |
| UPC | 645312123049 |
9. Кафолат ва дастгирӣ
For warranty information and technical support, please refer to the official MEAN WELL website or contact your authorized distributor. Keep your purchase receipt and the product's serial number (e.g., GB95522023) for any warranty claims or support inquiries.
