Дастури истифодабарии ҳавопаймои E-flite Carbon-Z Cessna 150 2.1M BNF Basic RC

1. Маҳсулот ба охир расидview

The E-flite Carbon-Z Cessna 150 2.1M BNF Basic is a large-scale remote control aircraft designed for sport flying. This model offers a wide flight envelope, suitable for various flying styles. It incorporates scale details and features for an enhanced experience.

Хусусиятҳои асосӣ:

• Large sport-scale model suitable for diverse flight maneuvers.
• Wide flight envelope, accommodating both gentle and aggressive flying.
• Scale details including LED lights, functional flaps, and wheel pants.
• Designed for field assembly without requiring tools.
• Innovative hands-free servo connection system for simplified setup.

Расми 1.1: Пеш view of the E-flite Carbon-Z Cessna 150 2.1M RC Airplane.

2. Маълумот оид ба бехатарӣ

Огоҳӣ: Пеш аз кор кардан бо хусусиятҳои маҳсулот шинос шудан, дастури дастури ТАМОМИ онро хонед. Дуруст истифода набурдани маҳсулот метавонад боиси вайрон шудани маҳсулот, моликияти шахсӣ ва боиси осеби ҷиддӣ гардад. Ин як маҳсулоти мураккаби маҳфилӣ аст. Он бояд бо эҳтиёт ва ақли солим кор карда шавад ва баъзе қобилияти асосии механикиро талаб мекунад. Ба таври бехатар ва масъулиятнок истифода накардани ин Маҳсулот метавонад боиси осеб дидан ё осеб дидани маҳсулот ё амволи дигар гардад. Ин маҳсулот барои кӯдакон бидуни назорати мустақими калонсолон пешбинӣ нашудааст. Бо ҷузъҳои номувофиқ истифода набаред ё ин маҳсулотро ба ҳеҷ ваҷҳ берун аз дастурҳои пешниҳодкардаи Horizon Hobby, LLC тағир надиҳед. Ин дастур дастурҳоро оид ба бехатарӣ, истифода ва нигоҳдорӣ дар бар мегирад. Пеш аз васл кардан, насб кардан ё истифода бурдан, ҳама дастурҳо ва огоҳиҳои дастурро хонед ва риоя кунед, то дуруст кор кунед ва аз осеб ё осеби ҷиддӣ пешгирӣ кунед.

3. Дар қуттӣ чӣ мавҷуд аст

• Carbon-Z Cessna 150 BNF Basic RC Airplane

Note: Additional components such as a compatible Spektrum DSMX/DSM2 transmitter, flight battery, and charger are required and sold separately.

4. Насбкунӣ ва васлкунӣ

4.1 Wing Assembly

1. Carefully slide each wing panel onto the wing tube until it is fully seated against the fuselage.
2. Ensure the hands-free servo connections engage properly.
3. Secure each wing panel using the provided fasteners or pins, as indicated in the manual.

Figure 4.1: Detail of component assembly, showing a pin being inserted.

4.2 Насби шасси фуруд

Attach the main landing gear and tail wheel assembly according to the diagrams. Ensure all connections are secure. The model features wheel pants for scale appearance.

4.3 Servo Connections

The Carbon-Z Cessna 150 utilizes an innovative hands-free servo connection system. When assembling the wings, ensure the servo connectors align and engage automatically. Verify all control surfaces move freely and correctly after assembly.

Figure 4.2: Detail of the hands-free servo connection system.

4.4 Battery Installation and Binding

1. Install the recommended flight battery (sold separately) into the designated battery compartment. Secure it to prevent movement during flight.
2. Follow the instructions for your Spektrum DSMX/DSM2 compatible transmitter to bind it with the aircraft's receiver. Refer to your transmitter's manual for specific binding procedures.
3. After binding, perform a control surface test to ensure all controls (ailerons, elevator, rudder, throttle) respond correctly to transmitter inputs.

5. Дастурҳои истифодабарӣ

5.1 Санҷишҳои пеш аз парвоз

• Ensure the flight battery is fully charged and securely installed.
• Verify all control surfaces move freely and in the correct direction relative to transmitter inputs.
• Пропеллерро аз рӯи ҳама гуна осеб ё сустӣ тафтиш кунед.
• Confirm the transmitter battery is adequately charged.
• Пеш аз парвози аввалини рӯз санҷиши диапазони системаи радиои худро анҷом диҳед.

5.2 Парвоз

Place the aircraft on a smooth surface facing into the wind. Gradually advance the throttle. Apply slight up-elevator as speed increases to lift off. Maintain a steady climb rate.

5.3 Парвоз

The Carbon-Z Cessna 150 is designed for stable flight characteristics. Use the ailerons for roll control, elevator for pitch, and rudder for yaw. Adjust throttle to control speed. Utilize flaps for slower flight and improved lift during takeoff and landing, if desired.

Figure 5.1: The Carbon-Z Cessna 150 in stable flight.

5.4 Фуруд

Approach the landing strip into the wind. Reduce throttle and gradually deploy flaps if using them. Maintain sufficient airspeed for control. Flare gently by applying up-elevator just before touchdown to achieve a smooth landing.

6. Нигоҳдорӣ

6.1 Санҷиши пас аз парвоз

• Inspect the airframe for any damage, cracks, or loose components.
• Check all control linkages and hinges for wear or looseness.
• Examine the propeller and spinner for damage. Replace if necessary.
• Ensure landing gear is secure and undamaged.

6.2 Тоза кардан ва нигоҳдорӣ

Clean the aircraft with a soft, damp cloth. Avoid using harsh chemicals. Store the model in a cool, dry place, away from direct sunlight and extreme temperatures, to preserve its materials and electronics.

7. Баррасии мушкилот

8. Мушаххасоти

Figure 8.1: The Carbon-Z Cessna 150 demonstrating its substantial size.

9. Маълумот дар бораи кафолат

This product is covered by a limited warranty provided by Horizon Hobby, LLC. For detailed warranty terms and conditions, please refer to the official Horizon Hobby website or contact their customer support. Proof of purchase may be required for warranty claims.

10. Дастгирии муштариён

For technical assistance, spare parts, or further information regarding your E-flite Carbon-Z Cessna 150, please visit the official E-flite or Horizon Hobby website. You can also contact their customer service department directly for support.

E-flite Store: Visit the E-flite Store on Amazon