1. Муқаддима
The Laserliner DigiLevel Laser G80 is a digital electronic spirit level designed for precise horizontal and vertical alignment, as well as accurate angle transfer. This device features an integrated green laser line for extending the measuring surface, a magnetic base for hands-free operation on metallic structures, and acoustic guidance for convenient use. Its 80 cm length makes it suitable for a wide range of applications in various trades.
2. Дастурамал оид ба бехатарӣ
Please read these safety instructions carefully before using the device. Failure to follow these instructions may result in injury or damage to the device.
- Радиатсияи лазерӣ: This device uses a Class 2 laser. Do not look directly into the laser beam or direct it towards other people. Eye protection is recommended when working with lasers.
- Батареяҳо: Ҳангоми ворид кардани батарея, қутби дурусти онро таъмин кунед. Батареяҳои кӯҳна ва нав ё намудҳои гуногуни батареяҳоро омехта накунед. Агар дастгоҳ муддати тӯлонӣ истифода нашавад, батареяҳоро хориҷ кунед.
- Нигоҳдорӣ: Do not attempt to open or modify the device. Repairs should only be performed by authorized personnel.
- Муҳити зист: Use the device within the specified operating temperature range (0°C to 40°C). Avoid exposure to extreme temperatures, moisture, or strong vibrations.
3. Маҳсулот ба охир расидview
3.1 Қисмҳо
The DigiLevel Laser G80 consists of the following main components:
- Намоиши рақамӣ
- Control Buttons (UNIT, REF, CAL, HOLD, Power/Backlight)
- Horizontal and Vertical Vials
- Green Laser Output
- Пойгоҳи магнитӣ
- Бахши батарея
Расми 1: Зиёдview of the Laserliner DigiLevel Laser G80.
Figure 2: The DigiLevel Laser G80, its protective carrying bag, and AAA batteries.
3.2 Намоиш ва тугмаҳо
The digital display provides clear readings and indicators. The buttons allow for various functions and settings.
Figure 3: Close-up of the backlit digital display, showing angle measurement and battery status.
Figure 4: The automatic 180° flip display feature for convenient overhead measurements.
- Тугмаи UNIT: Press to cycle through measurement units (degrees, %, mm/m).
- Тугмаи REF: Press to set the current angle as a reference (0°) for relative measurements.
- Тугмаи CAL: Press and hold to enter calibration mode for maintaining accuracy.
- Тугмаи нигоҳ доред: Press to freeze the current measurement on the display.
- Тугмаи фурӯзон (⑂): Press to turn the device on/off. Short press to activate/deactivate backlight.
4. Танзимот
4.1 Насби батарея
- Сарпӯши қисмати батареяро дар дастгоҳ ҷойгир кунед.
- Сарпӯшро кушоед.
- Insert two (2) 1.5V LR03 (AAA) batteries, ensuring correct polarity (+/-).
- Сарпӯши қисмати батареяро бехатар пӯшед.
5. Дастурҳои истифодабарӣ
5.1 Фаъол кардан/хомӯш кардан
Press the Power button (⑂) to turn the device on. Press and hold the Power button to turn it off.
5.2 Андозагирии асосӣ
Place the DigiLevel Laser G80 on the surface to be measured. The digital display will show the angle of inclination. The display automatically rotates 180° for overhead measurements.
5.3 Интихоби воҳид
-ро пахш кунед ВУД button to switch between different measurement units: degrees (°), percentage (%), and mm/m.
5.4 Reference Function (REF)
To measure relative angles, place the device on a surface and press the REF button. The display will show 0.0°, and subsequent measurements will be relative to this set reference angle. Press REF again to return to absolute measurement.
5.5 Calibration (CAL)
For sustained accuracy, periodic calibration is recommended. Refer to the full user manual for detailed calibration steps. Generally, this involves placing the device on a level surface, initiating calibration, rotating 180°, and confirming.
5.6 Функсияи лазерӣ
The integrated green laser line extends the measuring surface, allowing for precise alignment over longer distances. Activate the laser by pressing the dedicated laser button (often integrated with the power button or a separate button). The laser module is located at one end of the level.
Figure 5: The green laser module projecting a line for extended measurement.
Figure 6: The DigiLevel Laser G80 in use, projecting a green laser line onto a wall for alignment.
5.7 Acoustic Guidance
The device provides acoustic signals to assist with alignment at specific angles (0°, 45°, 90°). Three different tones indicate these angles, allowing for hands-free alignment without constantly watching the display.
Figure 7: Illustration of 360° angle measurement and acoustic signals at key angles (0°, 45°, 90°, 135°, 180°).
5.8 Функсияи нигоҳдорӣ
-ро пахш кунед ДОРЕД button to freeze the current measurement on the display. This is useful for taking readings in difficult-to-view positions. Press ДОРЕД again to release the measurement.
Figure 8: The 'Hold Angle' function, allowing the current measurement to be frozen on the display.
5.9 Пойгоҳи магнитӣ
The integrated magnetic base allows the device to be securely attached to metallic surfaces, enabling hands-free operation for increased convenience and precision.
Figure 9: The magnetic base provides secure attachment to metal surfaces.
6. Барномаҳо
The Laserliner DigiLevel Laser G80 is suitable for a variety of professional and DIY applications, including:
- Carpentry and Joinery: Precise alignment of wooden structures, frames, and furniture.
- Насби гипсокартон: Ensuring level and plumb surfaces for wall and ceiling panels.
- Бомпӯшӣ: Measuring and transferring roof pitches and angles.
- Рангкашӣ: Establishing level lines for decorative elements or wall preparation.
- Сохтмони умумӣ: Any task requiring accurate horizontal, vertical, or angle measurements.
Figure 10: Using the laser line to align multiple picture frames on a wall.
Figure 11: The spirit level used for vertical alignment, ensuring plumb surfaces.
Figure 12: Measuring and aligning on an angled ceiling or sloped surface.
Figure 13: Acoustic guidance assists in leveling shelves, indicated by sound waves.
Figure 14: Acoustic feedback helps in precisely aligning cabinets during installation.
7. Нигоҳдорӣ
- Тозакунӣ: Дастгоҳро бо нарм пок кунед, гamp матоъ. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.
- Нигоҳдорӣ: Store the device in its carrying bag in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods.
- Санҷиш: Дастгоҳро барои ягон аломати осеб мунтазам тафтиш кунед.
8. Баррасии мушкилот
- Дастгоҳ фаъол нест: Ҷойгиркунии батареяро тафтиш кунед ва боварӣ ҳосил кунед, ки батареяҳо тамом нашудаанд. Агар лозим бошад, иваз кунед.
- Хониши нодуруст: Perform a calibration as described in the full user manual. Ensure the device is placed on a stable surface.
- Лазер намоён нест: Check battery level. Ensure the laser output is not obstructed.
9. Мушаххасоти
| Рақами модел | 081.257А |
| Дарозӣ | 80 см |
| Навъи лазерӣ | Green Line Laser, Class 2, <1 mW |
| Дарозии мавҷҳои лазерӣ | 515 нм |
| Electronic Measurement Accuracy | ± 0.1° at 0°…1° and 89°…90°, ± 0.2° at 1°…89° |
| Vial Accuracy | ± 0.5 мм/м |
| Аниқии намоиш | 1 ҷои даҳӣ |
| Таъмини нерӯ | 2 x 1.5V LR03 (AAA) batteries |
| Ҳарорати корӣ | 0°С то 40°С |
| Материал | Алюминий |
| Вазн | 966 грамм |
10. Мундариҷаи баста
The Laserliner DigiLevel Laser G80 package includes:
- DigiLevel Laser G80 Digital Electronic Spirit Level
- 2 x 1.5V LR03 (AAA) Batteries
- Халтаи борбардорӣ
11. Кафолат ва дастгирӣ
Warranty information for the Laserliner DigiLevel Laser G80 is typically provided with the product at the time of purchase or can be obtained directly from the manufacturer, Laserliner. For technical support, please refer to the contact information provided in your product packaging or visit the official Laserliner webсайт.
