Муқаддима
This manual provides detailed instructions for the assembly, operation, and maintenance of your TecTake 403238 / 800747 Swivel Office Chair. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product. This ergonomic office chair is designed for comfort and support during extended periods of sitting, featuring a padded seat, backrest, and headrest, along with adjustable height and tilt functions.
Image: The TecTake 403238 / 800747 Swivel Office Chair, showcasing its black faux leather upholstery, padded armrests, and five-star base with casters.
Дастурҳои бехатарӣ
Барои пешгирӣ аз ҷароҳат ё осеб дидани курсӣ, лутфан қоидаҳои бехатарии зеринро риоя кунед:
- Ensure all components are securely fastened before use. Regularly check and tighten screws.
- Аз ҳадди ниҳоии вазни курсӣ зиёд набаред (ба мушаххасот нигаред).
- Аз истодан дар курсӣ ё истифода аз он ҳамчун курсии қадам худдорӣ кунед.
- Keep hands and fingers clear of moving parts, especially during height and tilt adjustments.
- Барои пешгирӣ аз чаппа шудан, курсиро дар сатҳи ҳамвор истифода баред.
- Барои пешгирӣ аз хатари нафаскашӣ, маводҳои бастабандиро аз дастрасии кӯдакон дур нигоҳ доред.
- Do not expose the chair to direct sunlight or extreme temperatures, as this may damage the material.
Рӯйхати ҷузъҳо
Пеш аз оғози васлкунӣ, боварӣ ҳосил кунед, ки ҳамаи қисмҳо мавҷуданд ва осеб надидаанд. Агар ягон қисм гум ё осеб дида бошад, васлкуниро идома надиҳед ва бо хадамоти дастгирии муштариён тамос гиред.
- Қафо
- Болишти курсӣ
- Дастакҳо (чап ва рост)
- Mechanism Plate (under seat)
- Баллони лифт
- Сарпӯши лифт
- Пойгоҳи панҷситорадор
- чархакҳо (5 дона)
- Hardware (screws, washers, Allen key)
Дастурҳо оид ба васлкунӣ
Follow these steps to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
Step 1: Attach Casters to the Base
Insert each of the five casters into the holes at the end of each leg of the five-star base. Push firmly until they click into place.
Қадами 2: Ҷойгир кардани лифтҳои газӣ
Place the gas lift cylinder into the central hole of the five-star base. Then, slide the gas lift cover over the gas lift cylinder.
Step 3: Attach Mechanism Plate to Seat
Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the adjustment lever faces the front of the seat. Secure it with the provided screws and tighten them using the Allen key.
Image: Close-up of the chair's adjustment lever, indicating its function for height and tilt control. This lever is part of the mechanism plate that attaches to the seat.
Step 4: Attach Armrests to Seat and Backrest
Attach the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet. Then, align the backrest with the armrests and secure it with screws. Once all screws are in place, tighten them evenly and securely.
Қадами 5: Маҷмаи курсиро ба лифт газ пайваст кунед
Carefully place the assembled seat and backrest onto the gas lift cylinder. The tapered end of the gas lift will fit into the central hole of the mechanism plate. Press down firmly on the seat to ensure a secure connection.
Тасвир: Пеш view of the fully assembled TecTake office chair, highlighting the padded seat, backrest, and armrests.
Your TecTake office chair is now assembled. Before use, ensure all connections are tight and the chair is stable.
Дастурҳои амалиётӣ
Your TecTake office chair offers several adjustments to customize your seating experience:
Танзими баландӣ
To adjust the seat height, locate the lever on the right side, beneath the seat.
- Барои баланд бардоштани курсӣ: Lift the lever while taking your weight off the seat. The seat will rise automatically. Release the lever at the desired height.
- Барои паст кардани курсӣ: Lift the lever while remaining seated. The seat will lower. Release the lever at the desired height.
Tilt Function and Lock
The chair features a tilt mechanism allowing the backrest and seat to recline together.
- To enable tilt: Pull the same lever (used for height adjustment) outwards from the chair. The chair will now allow you to recline.
- To lock tilt: Push the lever inwards towards the chair. The chair will lock in its upright position.
Image: An illustration demonstrating the range of height adjustment and the reclining tilt function of the office chair.
Танзими шиддати майл
Beneath the seat, at the front, there is a round knob. This knob controls the tension of the tilt mechanism.
- To increase tension (harder to recline): Тугмаро бо самти соат тоб диҳед.
- To decrease tension (easier to recline): Turn the knob counter-clockwise.
Нигоҳдорӣ
Regular maintenance will help prolong the life and appearance of your office chair.
- Тозакунӣ: For the faux leather upholstery, wipe with a soft, damp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the material.
- Чорчӯба ва пойгоҳ: Wipe metal and plastic parts with a damp матоъ.
- Кастрҳо: Periodically clean casters to remove hair, dust, and debris that may hinder smooth movement.
- Таҷҳизоти: Every 3-6 months, check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability and safety.
- Аз изофабор канорагирӣ кунед: Do not exceed the chair's stated weight capacity.
Мушкилкушо
Агар шумо бо курсии худ бо ягон мушкилот дучор шавед, ба мушкилот ва роҳҳои ҳалли маъмулии зерин муроҷиат кунед:
- Ҷингираки курсӣ:
Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving metal parts, avoiding contact with plastic or upholstery.
- Курсӣ баландиро танзим намекунад:
Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support.
- Chair Feels Unstable/Wobbly:
Verify that all screws, especially those connecting the armrests to the seat and backrest, are securely tightened. Ensure the gas lift is properly seated in the base and mechanism plate.
- Casters Do Not Roll Smoothly:
Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels and axles. Ensure the casters are fully inserted into the base.
Мушаххасоти
| Бренд | ТекТаке |
| Рақами модел | 800747 |
| Ранги | Сиёҳ |
| Материал | Polyurethane, Faux Leather, Pine Wood (frame) |
| Вазни ашё | 16.7 килограмм |
| Истифодаи тавсияшаванда | Идора |
| Хусусияти махсус | Сохтмони устувор |
Андозаҳо (тақрибан)
Image: Technical drawing illustrating the approximate dimensions of the TecTake office chair in centimeters. Key measurements include seat width (55 cm), seat depth (52 cm), backrest width (48 cm), adjustable seat height (47-55 cm), and overall height (115-123 cm).
- Overall Height: 115-123 cm
- Seat Height (adjustable): 47-55 cm
- Бари курсӣ: 55 см
- Чуқурии курсӣ: 52 см
- Backrest Width: 48 cm
- Armrest Height (from seat): 68.5-76.5 cm
- Base Diameter: 67 cm
Кафолат ва дастгирӣ
Specific warranty information for the TecTake 403238 / 800747 Swivel Office Chair is not provided in this document. For details regarding warranty coverage, spare parts availability, or technical support, please refer to the official TecTake website or contact their customer service directly. Information regarding spare parts availability was not provided in the product data.
Шумо метавонед боздид кунед Мағозаи брендии TecTake дар Amazon Барои маълумоти бештар.
