Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Муқаддима

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Маълумот оид ба бехатарӣ

• Пеш аз насб ва истифода ҳама дастурҳоро бодиққат хонед.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Боварӣ ҳосил кунед, ки дастгоҳ дар ҷои устувор насб карда шудааст, то аз афтиши тасодуфӣ пешгирӣ карда шавад.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Дастгоҳро аз дастрасии кӯдакон дур нигоҳ доред.

3. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ашё дар баста мавҷуд аст:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1х кронштейн барасмиятдарории
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Маҳсулот ба охир расидview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Расми 1: Пеш view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Компонентҳои асосӣ:

• PIR Lens: Detects infrared radiation from moving bodies.
• Нишондиҳандаи LED: Provides status feedback (e.g., detection, low battery).
• Бахши батарея: Манбаи қувваи барқро ҷойгир мекунад.
• Нуқтаҳои васлкунӣ: For secure installation on a wall.
• TampГузариш: Triggers an alarm if the sensor cover is opened.

5. Танзимот

5.1. Насби батарея

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Монтаж кардани сенсор

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Кронштейн васлкуниро ҳамчун қолаб барои қайд кардани мавқеъҳои винт дар девор истифода баред.
3. Дар мавқеъҳои ишорашуда сӯрохиҳоро парма кунед ва шамъҳои деворро гузоред.
4. Кронштейн васлкуниро ба девор бо истифода аз винтҳои додашуда мустаҳкам кунед.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Идоракунии сенсор

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. Ҳолати нишондиҳандаи LED

• Brief Flash: Муайянкунии ҳаракатро нишон медиҳад.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Нур нест: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Нигоҳдорӣ

7.1. Тозакунӣ

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Иваз кардани батарея

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Санҷишҳои мунтазам

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Баррасии мушкилот

9. Мушаххасоти

• Бренд: Intelbras
• Модели: IVP2000SF
• Манбаи нерӯ: Батареяе
• Навъи батарея: Алкалин
• Навъи васлкунӣ: Монтажи девор
• Дастгоҳҳои мувофиқ: Intelbras security systems and smart home hubs
• Андозаҳои маҳсулот: Тақрибан 17 x 10 x 9 см (6.7 x 3.9 x 3.5 инч)
• Усули ошкор: Инфрасурхи пассивӣ (PIR)
• Диапазони ошкор: То 12 метр (39 фут)
• Кунҷи ошкор: Тақрибан 90 дараҷа
• Муҳити фаъолият: Танҳо истифодаи дарунӣ

10. Маълумот дар бораи кафолат

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webба сомона муроҷиат кунед ё бо дастгирии муштариёни онҳо тамос гиред. Барои даъвоҳои кафолат далели хариди худро нигоҳ доред.

11. Дастгирӣ

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Webсайт: Visit the official Intelbras webсайт барои захираҳои дастгирӣ, Саволҳо ва маълумоти тамос.
• Телефон: Refer to the contact section on the Intelbras webсайт барои рақамҳои дастгирии маҳаллӣ.