Маҳсулот ба охир расидview
The Chief VCTUW XL Universal Projector Mount is engineered for quick installation and a clean aesthetic. This mount is designed to support laser projectors weighing between 50 and 150 lbs (22.7 – 68 kg). It features tool-free MicroZone adjustment for precise and reliable image registration.
Figure 1: Chief VCTUW XL Universal Projector Mount. This image displays the white projector mount from an elevated angle, highlighting its central mounting plate and four adjustable arms designed to secure a projector.
Маълумот оид ба бехатарӣ
Always read and understand all instructions before beginning installation. Improper installation can lead to equipment damage or personal injury. Ensure the mounting surface can support the combined weight of the mount and the projector.
- Иқтидори максималии вазнро аз 150 фунт (68 кг) зиёд накунед.
- Use appropriate fasteners for the mounting surface (wood studs, concrete, etc.).
- Ensure all connections are secure before releasinпроектор.
- Кӯдакон ва ҳайвоноти хонагиро аз майдони насб дур нигоҳ доред.
Насб ва насб
Воситаҳои зарурӣ:
- Парма
- Drill bits appropriate for fasteners
- Stud finder (for wood stud installation)
- Сатҳи
- Лентаи ченкунӣ
- Қалам
Қадамҳои насб:
- Тайёр кардани сатҳи васлкунӣ: Identify the desired location for the projector mount. Ensure the surface is structurally sound and can support the weight.
- Attach Ceiling Plate (if applicable): Secure the ceiling plate (sold separately or included with specific kits) to the ceiling using appropriate hardware. Ensure it is level and firmly attached.
- Connect Extension Column (if applicable): If using an extension column, attach it to the ceiling plate and then to the projector mount.
- Attach Mount to Projector: Align the universal arms of the VCTUW mount with the mounting points on your projector. Use the provided screws and spacers to secure the mount to the projector. The tool-free design allows for easy adjustment of the arms to fit various projector sizes.
- Mount Projector Assembly: Carefully lift the projector with the attached mount and connect it to the ceiling plate/extension column assembly. Ensure the quick-release mechanism (if present) is fully engaged and locked.
- Adjust Projector Position: Use the MicroZone adjustment knobs on the mount to fine-tune the projector's tilt, roll, and yaw for perfect image alignment.
Operating the Mount (Adjustments)
The VCTUW mount features tool-free MicroZone adjustments for precise projector positioning.
- Танзими чархиш: Rotate the front and rear adjustment knobs to control the vertical tilt of the projector.
- Roll Adjustment: Rotate the side adjustment knobs to correct any horizontal tilt or roll.
- Yaw Adjustment: Loosen the main pivot knob slightly, adjust the projector's horizontal rotation, and then re-tighten the knob.
Make small, incremental adjustments until the projected image is perfectly aligned with your screen.
Нигоҳдорӣ
The Chief VCTUW projector mount requires minimal maintenance to ensure long-lasting performance.
- Тозакунӣ: Periodically wipe the mount with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Санҷиш: Annually inspect all fasteners and connections to ensure they remain tight and secure. Check for any signs of wear or damage.
- Молидани: No lubrication is required for the adjustment mechanisms.
Мушкилкушо
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Projector image is crooked/not level. | Mount not level or fine adjustments needed. | Use the MicroZone tilt and roll adjustments to level the image. Ensure the ceiling plate is level during installation. |
| Projector feels loose on the mount. | Mounting screws not fully tightened or quick-release not engaged. | Verify all screws attaching the projector to the mount arms are secure. Ensure the quick-release mechanism (if applicable) is fully locked. |
| Difficulty adjusting projector position. | Тугмаҳои танзим хеле танганд ё механизм сахт аст. | Ensure adjustment knobs are not overtightened. If stiff, gently work the mechanism. Do not force adjustments. |
Мушаххасоти
- Модели: VCTUW
- Ранги: Сафед
- Иқтидори вазн: 50-150 фунт (22.7 - 68 кг)
- Adjustment Type: Tool-free MicroZone adjustment (Tilt, Roll, Yaw)
- Навъи васлкунӣ: Universal Projector Mount (typically ceiling or pole mounted with adapter)
- Вазни ашё: 31.7 pounds (Mount only)
- Истеҳсолкунанда: CHIEF MANUFACTURING
Маълумот дар бораи кафолат
Chief products are designed and manufactured to the highest standards. For specific warranty details, please refer to the official Chief website or contact Chief customer support. Keep your proof of purchase for warranty claims.
Note: Warranty terms may vary by region and product.
Дастгирии муштариён
For technical assistance, troubleshooting beyond this manual, or parts inquiries, please contact Chief customer support.
Webсайт: www.legrandav.com/products/chief
Please have your product model number (VCTUW) and purchase information ready when contacting support.
