1. Маҳсулот ба охир расидview
The Alphacool Eisbaer Aurora 280 is an all-in-one (AIO) liquid cooling system designed for CPU cooling. It features a copper radiator and an integrated pump with addressable RGB LED lighting. The system utilizes durable TPV hoses and G1/4" fittings, allowing for expandability and refilling. The pump and fans are equipped with digital RGB LEDs for customizable lighting effects.
Image 1.1: The Alphacool Eisbaer Aurora 280 CPU Liquid Cooler, showcasing its radiator, fans, and pump block with active RGB lighting.
2. Мундариҷаи баста
Пеш аз оғози насбкунӣ, боварӣ ҳосил кунед, ки ҳамаи ҷузъҳо мавҷуданд. Баста одатан инҳоро дар бар мегирад:
- Radiator with integrated pump and reservoir
- Two 140mm Aurora LUX Pro fans
- Mounting hardware for various Intel sockets (775, 1056, 1155, 1150, 1151)
- Пастаи гармӣ
- Digital RGB controller and cables
- Дастури корбар (ин ҳуҷҷат)
Image 2.1: Included mounting hardware, thermal paste, and cables for the Alphacool Eisbaer Aurora 280.
3. Дастури насб
This section provides general guidelines for installing the Alphacool Eisbaer Aurora 280 CPU liquid cooler. Refer to the detailed online manual for specific steps related to your CPU socket type.
3.1. Тайёрӣ
- Боварӣ ҳосил кунед, ки системаи шумо хомӯш аст ва аз манбаи барқ ҷудо карда шудааст.
- Prepare your CPU socket by cleaning the CPU surface and applying thermal paste (if not pre-applied).
- Identify the correct mounting brackets and screws for your motherboard's CPU socket.
3.2. Насби радиатор ва вентилятор
- Mount the two 140mm fans to the radiator using the provided screws. Ensure the fan airflow direction is appropriate for your case's cooling setup (intake or exhaust).
- Install the radiator assembly into an available 280mm fan mount location in your PC case.
Image 3.1: The radiator and fans of the Eisbaer Aurora 280, ready for installation into a PC case.
3.3. Pump Block Installation
- Secure the appropriate backplate (if required) to the rear of your motherboard.
- Position the pump block over the CPU, aligning it with the mounting holes.
- Fasten the pump block to the motherboard using the designated screws and standoffs. Tighten screws evenly in a cross pattern to ensure proper contact pressure.
Image 3.2: The copper cold plate of the pump block, which makes direct contact with the CPU.
3.4. Пайвастҳои кабелӣ
- Connect the pump's power cable to a SATA power connector from your power supply.
- Connect the fan PWM cables to available 4-pin fan headers on your motherboard or to a fan controller. Note: A fan splitter may be required if your motherboard has insufficient headers.
- Connect the digital RGB cables from the pump and fans to a compatible 3-pin JST + 3-pin 5V digital RGB header on your motherboard or an external RGB controller.
4. Дастурҳои истифодабарӣ
4.1. Оғози ибтидоӣ
Upon first power-up, the pump may produce some noise as air bubbles are cleared from the loop. This is normal and should subside within a few minutes. Monitor CPU temperatures to ensure proper cooling.
4.2. Назорати равшании RGB
The Eisbaer Aurora 280 features addressable RGB lighting on both the pump and fans. Control the lighting effects and colors using:
- Нармафзори motherboard: If connected to a compatible motherboard's digital RGB header, use the motherboard manufacturer's RGB control software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion).
- External RGB Controller: If using an external digital RGB controller, refer to the controller's specific instructions for customization.
Image 4.1: The Eisbaer Aurora 280 with its digital RGB lighting active on both fans and pump block.
5. Нигоҳдорӣ
Regular maintenance ensures optimal performance and longevity of your liquid cooling system.
5.1. Dust Cleaning
- Давра ба давра ғубори канатҳои радиатор ва вентиляторҳоро бо ҳавои фишурдашуда ё хасу нарм тоза кунед. Хоки аз ҳад зиёд метавонад ба ҷараёни ҳаво халал расонад ва самаранокии хунуккуниро коҳиш диҳад.
5.2. Coolant Refilling and Expansion
The Eisbaer Aurora 280 is designed to be refillable and expandable.
- Пур кардан: Over time, a small amount of coolant may evaporate. The pump block features a fill port (typically a screw on top) for adding coolant. Use only Alphacool-approved coolants to prevent corrosion or damage.
- Васеъшавӣ: The system uses G1/4" fittings and quick-release fasteners, allowing for easy integration into a larger custom loop or expansion with additional components like GPU blocks or extra radiators.
Image 5.1: The top of the pump block, showing the fill port for coolant maintenance.
6. Баррасии мушкилот
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Ҳарорати баланди CPU |
|
|
| Pump Noise/Grinding Sound |
|
|
| Равшании RGB кор намекунад |
|
|
7. Мушаххасоти техникӣ
| Компонент/Хусусият | Мушаххасоти |
|---|---|
| Андозаҳои радиатор (дарозӣ x паҳнӣ x баландӣ) | 313.5 x 144 x 30 мм |
| Маводи радиатор | Full Copper |
| Андозаҳои қубур | 12.7/6.7мм |
| Маводи варақа | Thermoplastic vulcanisates, EPDM/PP |
| Pump Housing Dimensions (L x W x H) | 66 x 66 x 69 мм |
| Суръати насос | 2600 чархзании |
| Насос Ҷилдиtage | 7 - 13.5В DC |
| Pump Power Consumption | 4W |
| Андозаи мухлис | 140 x 140 x 25 мм |
| Суръати мухлиси | 600 - 1500 чархзании |
| Фишори статикӣ | 0.41 - 1.6 mm H2O |
| Меъёри ҷараёни ҳаво | 27 - 71 m³/h |
| Подшипникҳои вентиляторӣ | Гидравликӣ |
| Пайвастшавандаи Fan | 4-Pin PWM |
| Digital RGB Connection | 3-Pin JST + 3-Pin 5V |
| Сокетҳои мувофиқи Intel | 775/1056/1155/1150/1151 |
8. Кафолат ва дастгирӣ
Барои гирифтани маълумот дар бораи кафолат ва дастгирии техникӣ, лутфан ба Alphacool-и расмӣ муроҷиат кунед webсайт ё фурӯшандаи худ тамос гиред. Барои даъвоҳои кафолат далели хариди худро нигоҳ доред.
Муҳим: The warranty period and support procedures may vary by region and retailer. Always consult the specific terms provided at the time of purchase.
