Муқаддима
This manual provides essential information for the proper installation, usage, and maintenance of your Dometic 3106992.062B S/T 45 Degree Bracket Kit. Please read these instructions carefully before proceeding with installation to ensure safe and correct operation. Retain this manual for future reference.
Маълумот оид ба бехатарӣ
Always observe basic safety precautions when working with tools and hardware. Ensure the installation area is clear and well-lit. Wear appropriate personal protective equipment, such as safety glasses and gloves. If you are unsure about any part of the installation process, consult a qualified professional.
Маҳсулот ба охир расидview
The Dometic 3106992.062B S/T 45 Degree Bracket Kit is an automotive part designed for specific installation requirements. It is supplied as a single unit with a total package weight of 4.0 pounds.

Image: Placeholder for the Dometic 3106992.062B S/T 45 Degree Bracket Kit. This image indicates that a product photo is not yet available.
Насб ва насб
This bracket kit is intended for specific automotive applications. Proper installation is crucial for its function and safety. While specific steps may vary based on the application, general guidelines are provided below.
Асбобҳои зарурӣ (маъмулӣ):
- Wrenches or sockets (appropriate sizes)
- Screwdrivers (Phillips/Flathead, if applicable)
- Лентаи ченкунӣ
- Воситаи аломатгузорӣ
- Пармакунӣ (агар сӯрохиҳои нав лозим бошад)
Қадамҳои умумии насб:
- Муайян кардани макони насб: Determine the precise location where the bracket needs to be installed. Refer to your vehicle or appliance's specific service manual for exact positioning.
- Тайёр кардани сатҳи: Ensure the mounting surface is clean, dry, and free from obstructions.
- Position Bracket: Carefully place the 45-degree bracket in the intended position. Verify alignment and orientation.
- Марк Холс: Use the bracket as a template to mark the locations for mounting holes.
- Сӯрохиҳои пармакунӣ (агар лозим бошад): If new holes are required, drill pilot holes of the appropriate size.
- Қавси бехатар: Attach the bracket using appropriate fasteners (not included unless specified by Dometic for your application). Ensure all fasteners are tightened securely to the manufacturer's specifications.
- Тафтиши устуворӣ: After installation, gently test the bracket's stability to ensure it is firmly attached and does not wobble.
Истифода ва функсия
The Dometic 3106992.062B S/T 45 Degree Bracket Kit serves as a structural support or mounting component. Once correctly installed, it provides a stable and secure attachment point or structural reinforcement at a 45-degree angle, as per its design. This component does not have active operational functions; its purpose is passive support.
Нигоҳдорӣ
To ensure the longevity and continued performance of your bracket kit, periodic inspection and maintenance are recommended.
- Санҷиши мунтазам: Periodically check the bracket and its mounting points for any signs of wear, corrosion, or loosening of fasteners.
- Тозакунӣ: Clean the bracket with a mild soap and water solution, then rinse thoroughly and dry. Avoid abrasive cleaners or solvents that could damage the finish.
- Пайвасткунакҳоро мустаҳкам кунед: Re-tighten any loose fasteners to prevent movement or failure.
- Муҳофизати зангзанӣ: If installed in an environment prone to corrosion, consider applying a suitable corrosion-inhibiting coating or lubricant to exposed metal parts, if appropriate for the material.
Мушкилкушо
Most issues related to a bracket kit are typically associated with installation or physical damage.
- Bracket is Loose: Check all mounting fasteners. Ensure they are tightened to the correct torque. Inspect the mounting surface for damage or instability.
- Bracket is Damaged: If the bracket shows signs of bending, cracking, or severe corrosion, it should be replaced immediately to prevent potential failure.
- Incorrect Angle/Position: Re-evaluate the installation steps and ensure the bracket is positioned and oriented correctly according to your application's requirements.
Мушаххасоти
| Истеҳсолкунанда | Дометикӣ |
| Бренд | Дометикӣ |
| Рақами модел | 106992062B |
| Рақами қисм | 3106992.062B |
| Навъи маҳсулот | AUTO PART |
| Миқдори бастаи адад | 1 |
| Вазни бастаи ашё | 4.0 фунт |
| ASIN | B085MLQFN6 |
| Санаи аввалин дастрас | 7 марти соли 2020 |
Кафолат ва дастгирӣ
For specific warranty information regarding the Dometic 3106992.062B S/T 45 Degree Bracket Kit, please refer to the documentation provided with your original purchase or visit the official Dometic website. For technical support or assistance with installation, contact Dometic customer service directly.





