Дастури корбарии камераи Micro iBeam Black кунҷи собит

1. Муқаддима

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Маълумот оид ба бехатарӣ

• Пеш аз оғози насби барқ, ҳамеша батареяи мошинро ҷудо кунед.
• Боварӣ ҳосил кунед, ки ҳамаи симҳо дуруст изолятсия ва мустаҳкам карда шудаанд, то аз занҷирҳои кӯтоҳ ё вайроншавӣ пешгирӣ карда шаванд.
• Ба ронанда халал нарасонед view or interfere with vehicle controls during installation.
• Агар шумо дар бораи ягон қисми раванди насб боварӣ надошта бошед, ба як насбкунандаи касбӣ муроҷиат кунед.
• This product is intended as an aid and should not replace safe driving practices.

3. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ашё дар баста мавҷуд аст:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Дастгоҳи ноқилӣ
• Дастури таълимӣ (ин ҳуҷҷат)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Маҳсулот ба охир расидview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Тасвир: Нақшаи наздик view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Хусусиятҳои асосӣ:

• Тарҳрезии компакт: Small footprint for discreet installation.
• Обногузар: Рейтинги IP68 барои кори боэътимод дар шароити гуногуни обу ҳаво.
• Сенсори тасвир: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view ё пеш view).
• Монтаж: Features an 8MM threaded bolt for secure mounting.

5. Танзим ва насб

Follow these steps for proper installation of your iBeam Micro Camera:

1. Ҷойгиркунии васлкуниро интихоб кунед: Select a location that provides an unobstructed view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Тайёр кардани сатҳи васлкунӣ: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Камераро насб кунед: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Пайвастҳои ноқилӣ:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Функсияи санҷиш: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Ноқилҳои бехатар: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Дастурҳои истифодабарӣ

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Самти тасвир: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Нигоҳдорӣ

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• Тозакунӣ: Линзаи камераро мунтазам бо матои нарм тоза кунед,amp матоъ барои тоза кардани лой, чанг ё доғҳои об, ки метавонанд монеъ шаванд view. Do not use abrasive cleaners.
• Санҷиш: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Аз шустани бо фишори баланд худдорӣ кунед: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. Баррасии мушкилот

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Мушаххасоти

10. Кафолат ва дастгирӣ

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam webсайт. Квитансияи хариди худро ҳамчун далели харид барои ҳама даъвоҳои кафолат нигоҳ доред.

Истеҳсолкунанда: Metra Electronics Corp