Муқаддима
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Scheppach AB1700 Demolition Hammer. Please read these instructions carefully before using the tool and retain them for future reference.
Дастурҳои умумии бехатарӣ
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, gloves, and a dust mask. Ensure the power cord is undamaged and avoid operating in wet conditions. Disconnect the tool from the power supply before making any adjustments or changing accessories.
Мундариҷаи баста
- Scheppach AB1700 Demolition Hammer
- Pointed Chisel (390 mm)
- Flat Chisel (390 mm)
- Metal Transport Case
- Дастури дастурӣ
Figure 1: The AB1700 Demolition Hammer, including the pointed chisel, flat chisel, and metal transport case.
Ташкил кардан
1. Chisel Installation
- Ensure the demolition hammer is disconnected from the power supply.
- The AB1700 features a 30mm hexagon tool holder. To insert a chisel, pull back the quick-release collar on the tool holder.
- Insert the desired chisel (pointed or flat) into the tool holder until it clicks into place.
- Release the quick-release collar and gently pull on the chisel to ensure it is securely locked.
Figure 2: The demolition hammer with a chisel installed, ready for operation.
2. Танзими даста
The demolition hammer is equipped with two handles for control and comfort. The front handle can be adjusted to suit individual needs. Loosen the locking screw on the front handle, position the handle for optimal grip and balance, then tighten the screw securely. The rear D-handle provides an ergonomic grip and assists in maneuvering the tool.
Figure 3: Detail of the adjustable front handle and the tool holder mechanism.
Дастурҳои амалиётӣ
1. Пайвастшавии барқ
Connect the power cord to a suitable 230V AC power outlet. Ensure the power supply matches the tool's specifications.
2. Оғоз кардан ва қатъ кардан
To start the demolition hammer, press the ON/OFF switch. To stop the tool, release the switch. Some models may feature a lock-on button for continuous operation; refer to the specific switch mechanism on your tool.
3. Demolition Work
- Hold the tool firmly with both hands using the soft grip handles.
- Position the chisel against the material to be demolished (e.g., concrete, masonry).
- Apply steady, downward pressure. The tool's weight (approximately 14 kg) assists in driving the chisel into the material.
- Allow the tool's 50 joules of impact force and 2000 strokes per minute to perform the work. Avoid forcing the tool, as this can lead to overheating or damage.
- For optimal results, work systematically, breaking off smaller sections of material.
Figure 4: Proper technique for operating the demolition hammer during concrete removal.
Нигоҳдорӣ
1. Тозакунӣ
After each use, disconnect the tool from the power supply. Clean the exterior of the tool with a damp cloth. Remove any debris from the ventilation openings to prevent overheating. Do not use harsh chemicals or abrasive cleaners.
2. Chisel Care
Inspect chisels for wear or damage before and after each use. Sharpen or replace chisels as necessary to maintain optimal performance.
3. Нигоҳдорӣ
Store the demolition hammer and its accessories in the provided metal transport case. Keep the tool in a dry, secure location, out of reach of children and unauthorized users.
Figure 5: The demolition hammer and accessories stored in the metal transport case.
Мушкилкушо
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Восита оғоз намешавад | Не таъминоти барқ; гузариши нодуруст; сими вайроншуда. | Check power connection and outlet; inspect cord for damage; contact service if switch is faulty. |
| Қувваи таъсири камшуда | Worn chisel; insufficient pressure; internal issue. | Replace or sharpen chisel; apply adequate pressure; contact service for internal issues. |
| Chisel not locking securely | Debris in tool holder; damaged quick-release mechanism. | Clean tool holder; ensure chisel shank is clean; contact service if mechanism is damaged. |
| Вибрация ё садои аз ҳад зиёд | Loose components; internal wear. | Cease operation immediately; contact authorized service personnel. |
Мушаххасоти
| Модели | AB1700 |
| Вуруди нерӯ | 1700 В |
| Ҷилдиtage | 230 В (AC) |
| Қувваи таъсир | 50 Ҷ |
| Зарбҳо дар як дақиқа | 2000 зарба |
| Дорандаи асбоб | 30 mm Hexagon |
| Chisel Length | 390 мм |
| Вазни ашё | 13.5 кг (29.7 фунт) |
| Андозаҳои маҳсулот (L x W x H) | 25.98" x 5.91" x 10.24" |
| Сатҳи садо | 102 дБ |
| Дарозии сим | 3000 мм |
| Материал | Металл |
| Компонентҳои дохилшуда | Demolition hammer, flat and pointed chisel, transport case made of metal |
Кафолат
Warranty information for the Scheppach AB1700 Demolition Hammer is typically provided with the product documentation or can be obtained directly from the manufacturer or authorized dealer. Please refer to the warranty card included in your product packaging or visit the official Scheppach webсайт барои шартҳо ва шартҳои муфассал.
Дастгирӣ
For technical assistance, spare parts, or service inquiries, please contact your local Scheppach service center or the retailer where the product was purchased. You may also find additional support resources on the official Scheppach webсайт: www.scheppach.com.
