1. Муқаддима
This manual provides detailed instructions for the installation, operation, and maintenance of your ORION Cobalt CBA4500.1D Monoblock 1-Channel Class D Ampбаландкунанда. Ин amplifier is designed to deliver powerful and precise audio for car subwoofers, featuring a Class D design for efficiency and robust performance.
Key features include a quality frequency response, crossover network, 1 Ohm stability, adjustable low pass and subsonic filters, bass boost, and a MOSFET power supply for reliable operation. It also incorporates a 2-way protection circuitry to safeguard against potential issues.
2. Дар қуттӣ чӣ мавҷуд аст
Upon unpacking your ORION Cobalt CBA4500.1D amplifier, please ensure all items are present:
- ORION Cobalt CBA4500.1D Monoblock Ampзиндатар
- Таҷҳизоти васлкунӣ
- Remote Bass Knob
- Дастури корбар (ин ҳуҷҷат)
If any items are missing or damaged, please contact your dealer or ORION customer support immediately.
3. Маълумот оид ба бехатарӣ
Огоҳӣ: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please refer to www.P65Warnings.ca.gov.
Always ensure proper ventilation around the amplifier to prevent overheating. Incorrect installation or operation can lead to damage to the amplifier, vehicle, or personal injury. It is recommended that installation be performed by a qualified professional.
4. Дастури насб
Proper installation is crucial for optimal performance and safety. It is highly recommended to have this amplifier installed by a certified car audio professional.
4.1 Ҷойгиркунии Ampзиндатар
Choose a mounting location that is dry, well-ventilated, and protected from direct sunlight or excessive heat. Ensure there is sufficient airflow around the amplifier to prevent overheating. The amplifier can be mounted on a panel or using brackets.
Тасвир: боло view of the ORION Cobalt CBA4500.1D Monoblock Amplifier, showing the ORION logo and model number.
Тасвир: тараф view of the ORION Cobalt CBA4500.1D Monoblock Amplifier, displaying the power input terminals (+12V, REM, GND) and speaker output terminals, along with the fuse slots.
4.2 Пайвастҳои ноқилӣ
Пеш аз пайвастшавӣ, терминали манфии батареяи мошинро ҷудо кунед, то аз хати кӯтоҳи барқӣ пешгирӣ кунед.
- Пайвасти барқ (+12V): Connect a heavy gauge power cable (not included) from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Ensure an appropriate fuse holder is installed within 18 inches of the battery.
- Пайвастшавӣ ба замин (GND): Connect a heavy gauge ground cable (not included) from the GND terminal on the amplifier to a clean, unpainted metal surface on the vehicle's chassis. The ground point should be as short as possible.
- Фаъолсозии дурдаст (REM): Connect a remote turn-on wire (not included) from your head unit's remote output to the REM terminal on the ampлифти барқ. Ин сим сигнал медиҳад ampлифт барои фурӯзон ва хомӯш кардани дастгоҳи саратон.
- Натиҷаи баландгӯяк: Connect your subwoofer(s) to the speaker output terminals. This is a 1-channel monoblock amplifier, designed for a single subwoofer or multiple subwoofers wired to a 1 Ohm stable load. Refer to your subwoofer's specifications for proper wiring configurations.
- Вуруди RCA (Вуруд): Connect RCA cables from your head unit's subwoofer output to the RCA input jacks on the ampзиндатар. Дар amplifier supports low-level (RCA) inputs.
- Тугмаи бассҳои дурдаст: Connect the included remote bass knob to the 'REMOTE' port on the amplifier. This allows for convenient adjustment of the bass level from the driver's seat.
Тасвир: тараф view of the ORION Cobalt CBA4500.1D Monoblock Amplifier, showing RCA input/output, gain control, low pass filter, subsonic filter, phase switch, bass boost, and remote bass knob port.
Image: The remote bass knob and its connecting cable, used for convenient bass level adjustment.
5. Дастурҳои истифодабарӣ
Пас аз насб кардан, amplifier can be configured for optimal audio performance using its various controls.
5.1 Gain Control (GAIN)
The GAIN control adjusts the input sensitivity of the amplifier. Start with the gain set to minimum (MIN) and slowly increase it until the desired volume is achieved without distortion. This should be matched to the output voltage аз воҳиди асосии шумо.
5.2 Филтри Pass Pass (LPF)
The LPF control allows you to set the upper frequency limit for the amplifier's output, typically ranging from 40Hz to 250Hz. This ensures that only low frequencies are sent to your subwoofer, preventing it from playing higher frequencies it's not designed for.
5.3 Subsonic Filter (SONIC)
The SUB SONIC filter removes extremely low frequencies (below 15Hz-50Hz) that are inaudible but can cause your subwoofer to over-excurt and waste power. Adjust this to protect your subwoofer and improve sound quality.
5.4 Bass Boost (BASS BOOST)
The BASS BOOST control provides an adjustable boost to low frequencies, typically from 0dB to 12dB. Use this feature to enhance the bass impact according to your preference. Use sparingly to avoid distortion or damage to speakers.
5.5 Phase Shift (PHASE)
The PHASE switch (0° or 180°) helps to align the phase of the subwoofer's output with the rest of your car audio system. Experiment with both settings to find the one that provides the most coherent and impactful bass response.
5.6 Тугмаи бассҳои дурдаст
The remote bass knob provides convenient, real-time adjustment of the subwoofer's output level from your driving position. This allows for quick adjustments without needing to access the ampбардоранда бевосита.
6. Нигоҳдорӣ
To ensure the longevity and optimal performance of your ORION Cobalt CBA4500.1D amplifier, ин дастурҳои нигоҳубинро риоя кунед:
- Тозакунӣ: Давра ба давра тоза кунед ampберунии lifier бо матои мулоим ва хушк. Аз истифодаи кимиёвии сахт ё тозакунандаи абразив худдорӣ намоед.
- Вентилятсия: Боварӣ ҳосил кунед, ки ampСӯрохиҳои вентилятсияи лифтер баста нашудаанд. Барои пешгирии аз ҳад зиёд гарм шудан, ҷараёни дурусти ҳаво муҳим аст.
- Пайвастшавӣ: Regularly check all wiring connections for tightness and corrosion. Loose or corroded connections can lead to performance issues or damage.
- Симҳо: Дар amplifier is equipped with fuses for protection. If a fuse blows, replace it only with a fuse of the same type and rating. Never use a higher rated fuse.
7. Баррасии мушкилот
Агар шумо бо мушкилоти худ дучор шавед amplifier, ба қадамҳои маъмулии ҳалли мушкилот муроҷиат кунед:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Не қудрат / Ampлифт ба кор намеояд | Сӯхтагии фишанг, суст шудани сими барқ/заминӣ/дурдаст, сигнали фурӯзонкунии дурдасти вайроншуда. | Check and replace fuses. Verify all power, ground, and remote connections are secure. Test remote wire for 12V when head unit is on. |
| Не баромади садо | Loose RCA cables, incorrect gain setting, speaker wiring issues, ampлифт дар ҳолати муҳофизат. | Check RCA connections. Adjust gain. Verify speaker wiring for correct polarity and impedance. Check if the PWR/PRT indicator is red (protection mode). |
| Овози таҳрифшуда | Gain set too high, incorrect LPF/Subsonic settings, speaker impedance mismatch. | Lower the gain. Adjust LPF and Subsonic filters. Ensure speaker impedance matches amplifier's capabilities (1, 2, or 4 Ohm stable). |
| Ampлифт аз ҳад зиёд гарм шудан | Insufficient ventilation, impedance too low, prolonged high-power usage. | Гардиши дурусти ҳаворо дар атрофи amplifier. Check speaker impedance. Reduce volume or usage time. |
If the problem persists after following these steps, please contact ORION customer support or a qualified service technician.
8. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Рақами модел | CBA4500.1D |
| Бренд | ОРИОН |
| Шумораи каналҳо | 1 (Монаблок) |
| AmpСинфи болокунанда | Синфи D |
| Ҳокимият Натиҷа (Max) | 4500 Ватт |
| RMS Power @ 1 Ohm | 1125 Вт |
| Қувваи RMS @ 2 Ом | 650 Вт |
| Қувваи RMS @ 4 Ом | 350 Вт |
| Устувории импеданс | 1/2/4 Ohm Stable |
| Ҷавоби басомад | 10 ~ 250 Гц |
| Филтрҳои пасти гузариш (LPF) | Adjustable (40Hz-250Hz) |
| Филтри субсоникӣ | Adjustable (15Hz-50Hz) |
| Баста пурзӯр | Adjustable (0dB-12dB) |
| Гузариши марҳила | 0° / 180° |
| Таъмини нерӯ | MOSFET |
| Схемаи муҳофизатӣ | 2-way (Thermal Protection) |
| Ҷилдиtage | 12 Volts (Maximum Supply Voltagд: 16 вольт) |
| Андозаҳои маҳсулот (L x W x H) | 15 x 7 x 3 инч |
| Вазни ашё | 5.48 фунт |
| UPC | 818550017085 |
9. Видеои расмии маҳсулот
Video: "Unleashing the Power of the Orion CBA4500.1D Amplifier" - This video provides a visual overview аз amplifier's features, design, and internal components, demonstrating its capabilities and build quality.
10. Кафолат ва дастгирӣ
ORION products are designed for durability and performance. For warranty information, technical support, or service inquiries, please refer to the official ORION webсайт ё дилери ваколатдори худ тамос гиред.
Квитансияи хариди худро ҳамчун далели харид барои ҳама даъвоҳои кафолат нигоҳ доред.
Барои захираҳои иловагӣ ва маълумот дар бораи маҳсулот, боздид кунед ORION Store on Amazon.
