AUTO-VOX 12V Add-a-Circuit Adapter & Fuse Kit Instruction Manual

1. Муқаддима

This manual provides essential instructions for the safe and effective installation and use of your AUTO-VOX 12V Add-a-Circuit Adapter & Fuse Kit. This product is designed to provide a safe and convenient way to add an additional circuit to your vehicle's electrical system without cutting or splicing existing wires. Please read this manual thoroughly before installation.

2. Маълумот оид ба бехатарӣ

• Always disconnect the vehicle's battery before working on the electrical system to prevent electrical shock or damage.
• Ensure the new accessory's current draw does not exceed the vehicle's electrical system capacity or the fuse tap's rating.
• Use fuses with the correct amperage rating for both the original circuit and the new accessory circuit. Incorrect fuse ratings can lead to electrical fires or component damage.
• If you are unsure about any step of the installation process, consult a qualified automotive electrician.
• Кӯдакон ва ҳайвоноти хонагиро аз ҷои кор дур нигоҳ доред.

3. Мундариҷаи баста

• 2 x AUTO-VOX 12V Mini Add-a-Circuit Adapter

Note: Fuses for the new accessory circuit are typically not included and must be purchased separately based on the accessory's power requirements.

4. Танзим ва насб

Follow these steps to install the AUTO-VOX Add-a-Circuit Adapter:

1. Қуттии фишангро пайдо кунед: Identify your vehicle's fuse box. Common locations include under the dashboard, in the engine bay, or in the trunk. Refer to your vehicle's owner's manual for the exact location.
2. Identify a Suitable Fuse Slot:
   • Choose an existing fuse that provides power only when the vehicle is on (a "switched" power source) if your accessory should turn on and off with the ignition.
   • Alternatively, select a "constant" power source if the accessory requires continuous power (e.g., for parking monitoring).
   • Ensure the chosen circuit has sufficient capacity for both the original component and your new accessory. Avoid critical circuits like airbags or engine management.
3. Determine Original Fuse Rating: Дар хотир доред amperage rating of the original fuse you will be tapping into. This fuse will be re-inserted into the add-a-circuit adapter.
4. Prepare the Add-a-Circuit:
   • -ро ворид кунед original fuse (for the existing circuit) into the lower fuse slot of the add-a-circuit adapter.
   • ворид кунед а new fuse (for your accessory) into the upper fuse slot of the add-a-circuit adapter. The rating of this new fuse should match the power requirements of your accessory.
5. Пайваст кардани сими лавозимот: Crimp or solder your accessory's positive power wire to the red wire lead of the add-a-circuit adapter. Ensure a secure and insulated connection.
6. Адаптерро насб кунед: Carefully remove the original fuse from the chosen slot in the fuse box. Insert the add-a-circuit adapter (with both fuses installed) into the now empty fuse slot. Ensure it is fully seated.
7. Connect Accessory Ground: Connect your accessory's ground wire to a suitable metal chassis point in the vehicle.
8. Санҷиши насбкунӣ: Reconnect the vehicle's battery. Turn on the ignition and test your accessory to ensure it functions correctly.

Image 1: The AUTO-VOX 12V Mini Add-a-Circuit Adapter. This image shows the adapter with its two fuse slots (one for the original circuit, one for the new accessory) and the red wire lead for connecting to the accessory's power.

5. Дастурҳои истифодабарӣ

Once properly installed, the AUTO-VOX Add-a-Circuit Adapter operates automatically. It provides power to your connected accessory while maintaining the integrity and protection of the original circuit. The two separate fuse slots ensure that both the original vehicle circuit and the newly added accessory circuit are independently protected by their respective fuses.

6. Нигоҳдорӣ

• Иваз кардани сӯзишворӣ: If your accessory stops working, first check its fuse in the upper slot of the add-a-circuit adapter. If blown, replace it with a new fuse of the exact same amperage rating. If the original circuit's fuse (lower slot) blows, replace it with the correct rating as well.
• Санҷиши даврӣ: Periodically inspect the connections for any signs of corrosion or looseness. Ensure the adapter remains securely seated in the fuse box.

7. Баррасии мушкилот

• Лавозимот кор намекунад:
  • Check the fuse for the accessory in the upper slot of the add-a-circuit.
  • Verify all connections (power and ground) are secure.
  • Ensure the add-a-circuit is fully seated in the fuse box.
  • Confirm the chosen fuse slot provides power (test with a multimeter).
• Original Vehicle Component Not Working:
  • Check the original fuse in the lower slot of the add-a-circuit.
  • Ensure the add-a-circuit is correctly installed and not causing a short.
• If issues persist, disconnect the add-a-circuit and consult a professional automotive technician.

8. Мушаххасоти

• Навъи маҳсулот: Add-a-Circuit Adapter / Fuse Tap
• Ҷилдиtage Рейтинг: 12В DC
• Навъи сӯзишворӣ: Mini (ATM/APM)
• Рақами модел: c7041d0d-bffd-4af0-b102-25b30e8a1461
• Вазни ашё: 2.39 унция
• Андозаҳои баста: 5.04 x 2.6 x 1.65 инч
• Истеҳсолкунанда: AUTO VOX

9. Кафолат ва дастгирӣ

For warranty information or technical support, please contact AUTO-VOX customer service through their official website or the retailer where the product was purchased. Please have your model number (c7041d0d-bffd-4af0-b102-25b30e8a1461) and purchase details available.