ORIA Motion Sensor Light User Manual

1. Муқаддима

Ташаккур ба шумо барои харидasing the ORIA Motion Sensor Light. This battery-powered LED night light is designed to provide convenient, automatic illumination in various areas of your home. Please read this manual carefully before installation and use to ensure proper operation and longevity of your device.

2. Мундариҷаи баста

• 3 x ORIA Motion Sensor Night Light
• 6 x винтҳо
• 1 x лентаи илтиёмии дутарафа
• 1 x Дастури корбар

3. Мушаххасоти

4. Маълумот оид ба бехатарӣ

• Батареяҳои кӯҳна ва навро омехта накунед.
• Батареяҳои сілтӣ, стандартӣ (карбон-синк) ё барқгиранда (никель-кадмий) омехта накунед.
• Ensure batteries are inserted with correct polarity (+ and -).
• Remove batteries if the light will not be used for an extended period.
• Ин дастгоҳ танҳо барои истифодаи дарунӣ аст.
• Ба об ё намӣ аз ҳад зиёд дучор накунед.
• Аз дастрасии кӯдакон дур нигоҳ доред.

5. Танзимот

5.1 Насби батарея

1. Сарпӯши қафои чароғро ба муқобили ақрабаки соат оҳиста печонед, то ки қисмати батареяро кушоед.
2. Insert 3 AAA batteries (not included) into the compartment, ensuring correct polarity.
3. Replace the back cover by aligning the marks and twisting clockwise until secure.

5.2 Имкониятҳои васлкунӣ

The ORIA Motion Sensor Light offers two installation methods:

Image: Demonstrates the two installation methods: using screws for a permanent fixture or double-sided adhesive tape for a temporary, non-damaging mount.

Варианти 1: Монтажи винт

• Choose a desired location for the light.
• Mark the positions for the two screw holes on the mounting surface.
• Агар лозим бошад, сӯрохиҳои пилотӣ парма кунед.
• Secure the light to the surface using the provided screws.

Option 2: Adhesive Tape Mounting

• Clean and dry the desired mounting surface thoroughly.
• Peel off one side of the double-sided adhesive tape and apply it firmly to the back of the light.
• Peel off the other side of the tape and press the light firmly onto the mounting surface for at least 30 seconds.
• Allow 24 hours for the adhesive to fully cure before applying significant pressure.

6. Дастурҳои истифодабарӣ

The ORIA Motion Sensor Light features three operating modes: ON, OFF, and AUTO.

Image: Illustrates the light's behavior: off during daylight, activating upon motion detection, and automatically turning off after 30 seconds of no motion.

6.1 Интихоби режим

Locate the switch on the side of the light to select your desired mode:

• ДАР БОРАИ: The light will remain continuously on, regardless of ambient light or motion.
• OFF: Чароғ хомӯш боқӣ хоҳад монд.
• AUTO (Motion Sensor Mode): The light will automatically turn on when motion is detected in a dark environment. It will turn off approximately 30 seconds after motion ceases.

6.2 Функсияи сенсори ҳаракат

Image: A motion sensor light mounted on a wall, illuminating a staircase as a person ascends, demonstrating its practical application.

• Кунҷи ошкор: 120 дарача
• Масофаи ошкор: То 9.8 фут (3 метр)
• The sensor is designed to activate only in low-light conditions to conserve battery life.
• Avoid placing the light in direct sunlight or near heat sources, as this may affect sensor performance.

7. Нигоҳдорӣ

• Тозакунӣ: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
• Иваз кардани батарея: When the light dims or fails to activate, replace all 3 AAA batteries with new ones. Ensure correct polarity.
• Нигоҳубини сенсор: Keep the motion sensor lens clean and unobstructed for optimal performance.

8. Баррасии мушкилот

9. Кафолат ва дастгирӣ

ORIA products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ORIA webсайт.

Лутфан ин дастурро барои истинод дар оянда нигоҳ доред.