1. Маҳсулот ба охир расидview
The Einhell Power X-Change 5.2 Ah Battery Twinpack consists of two 18V 5.2 Ah Power X-Change PLUS batteries. These batteries are integral components of the versatile and fully interchangeable Einhell Power X-Change rechargeable battery system. Designed for universal use across all PXC devices, they offer significant cost savings and environmental benefits by allowing a single battery and charger to power multiple tools.
The 18V 5.2 Ah PXC PLUS battery is a high-end model within the Power X-Change family, suitable for TWIN-PACK applications requiring 36V. Its robust housing is engineered to resist dust, corrosion, and mechanical impacts. A protective rubber coating enhances impact resistance and provides a secure grip. A convenient trough handle facilitates easy removal from any tool.
Figure 1: Einhell Power X-Change 5.2 Ah Battery Twinpack. Each battery features a charge indicator with four green LEDs and a robust, ergonomic design.
2. Дастурамал оид ба бехатарӣ
Always observe the following safety precautions when handling and using your Einhell Power X-Change batteries:
- Do not expose batteries to heat, direct sunlight, or fire.
- Терминалҳои батареяро ноқилҳои кӯтоҳ накунед.
- Батареяҳоро ба об ё дигар моеъҳо нағӯтонед.
- Store batteries in a cool, dry place, away from flammable materials.
- Only use original Einhell chargers for charging.
- Do not attempt to open, modify, or repair the battery pack.
- Батареяҳоро аз дастрасии кӯдакон дур нигоҳ доред.
- In case of battery leakage, avoid contact with skin and eyes. Rinse affected areas with water and seek medical attention.
- Dispose of depleted batteries responsibly according to local regulations.
3. Танзимот ва истифодаи аввала
3.1 Кушодани баста
Carefully remove the batteries from their packaging. Inspect them for any signs of damage. If any damage is observed, do not use the batteries and contact customer support.
3.2 Пур кардани батареяҳо
Before first use, fully charge both batteries. Use only an Einhell Power X-Change charger (sold separately). The charging process is as follows:
- Пуркунандаи барқро ба васлаки мувофиқ пайваст кунед.
- Батареяро ба болои пуркунанда лағжонед, то он даме ки он ба ҷои худаш лағжад.
- Чароғаки нишондиҳандаи пуркунандаи барқ ҳолати пуркунандаи барқро нишон медиҳад. Барои намунаҳои равшани мушаххас ба дастури пуркунандаи барқ муроҷиат кунед.
- Once fully charged, the indicator light will change (e.g., solid green). Remove the battery from the charger.
The batteries feature a proactive battery management system and adapted charging cycles to optimize lifespan and performance.
4. Operating the Batteries
4.1 Inserting the Battery into a Tool
Боварӣ ҳосил кунед, ки асбоб пеш аз гузоштан ё хориҷ кардани батарея хомӯш карда шудааст.
- Align the battery with the battery slot on your Einhell Power X-Change tool.
- Батареяро маҳкам ба слот лағжонед, то он даме ки он ба ҷои худ мустаҳкам ва бо клик садо диҳад.
- To remove, press the release button(s) on the battery (or tool, depending on design) and slide the battery out.
4.2 Battery Charge Indicator
Each battery is equipped with an LED charge indicator. Press the button next to the LEDs to check the current charge level:
- 4 LED фурӯзон: 75-100% заряд
- 3 LED фурӯзон: 50-75% заряд
- 2 LED фурӯзон: 25-50% заряд
- 1 LED фурӯзон: 0-25% барқ (ба зудӣ пур кунед)
5. Нигоҳдорӣ ва нигоҳдорӣ
5.1 Тозакунӣ
Wipe the battery surface with a clean, dry cloth. Do not use abrasive cleaners or solvents. Ensure the battery terminals are clean and free of debris.
5.2 Нигоҳдорӣ
For optimal battery life, store batteries in a cool, dry place (ideally between 5°C and 20°C / 41°F and 68°F) and away from direct sunlight or extreme temperatures. If storing for extended periods, charge the batteries to approximately 50-75% capacity. Avoid storing fully discharged batteries.
6. Баррасии мушкилот
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Батарея пур карда намешавад. | Charger not plugged in; faulty charger; battery too hot/cold; faulty battery. | Check power connection; try another charger; allow battery to reach room temperature; contact customer support if battery is faulty. |
| Tool not operating with battery. | Battery not fully inserted; battery discharged; faulty tool; faulty battery. | Ensure battery is clicked into place; charge battery; test with another battery/tool; contact customer support. |
| Battery charge indicator not working. | Button malfunction; internal fault. | Ensure button is pressed firmly; if issue persists, contact customer support. |
7. Мушаххасоти
- Рақами модел: 4511526
- Навъи батарея: Литий ион (Li-Ion)
- Ҷилдиtage: 18 В
- Иқтидори: 5.2 Ах (Ampсоат пеш)
- Андозаҳои маҳсулот: 4.84 x 3.03 x 2.87 инч (12.3 x 7.7 x 7.3 см)
- Вазни ашё: 1.96 pounds (0.89 kg) per battery
- Шумораи батареяҳо: 2 (included in twinpack)
- Истифодаи тавсияшаванда: Power Tools within the Einhell Power X-Change system
8. Кафолат ва дастгирӣ
Einhell products are manufactured with high-quality materials and undergo strict quality control. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service through their official channels.
Official Einhell Webсайт: www.einhell.com
