Дастури истифодабарии True Manufacturing GDM-72-HC~TSL01 барои фурӯшандагони дарҳои шишагин

1. Маҳсулот ба охир расидview

The True Manufacturing GDM-72-HC~TSL01 is a commercial glass door merchandiser designed for displaying and refrigerating packaged food and beverages. This unit features an oversized refrigeration system for optimal product temperatures and energy efficiency. It is constructed with high-quality materials for durability and an attractive presentation.

Хусусиятҳои асосӣ инҳоянд:

• High capacity, factory balanced refrigeration system.
• Диапазони ҳарорат: 33°F то 38°F (0.5°C то 3.3°C).
• Non-peel or chip black powder coated cold rolled steel exterior.
• White aluminum interior with stainless steel floor.
• Double pane thermal insulated glass sliding doors.
• Adjustable heavy-duty PVC coated wire shelves.
• LED interior lighting for enhanced product visibility.
• Easily accessible condenser coil for cleaning.

Расми 1: Пеш view of the True Manufacturing GDM-72-HC~TSL01 Glass Door Merchandiser.

2. Танзим ва насб

2.1 Кушодани баста

Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and your dealer. Retain all packaging materials for inspection.

2.2 Ҷойгиркунӣ

This unit is designed for freestanding installation. Ensure the merchandiser is placed on a level, sturdy surface capable of supporting its weight when fully loaded. Allow adequate clearance around the unit for proper ventilation and maintenance. The product dimensions are approximately 28.88 x 78.13 x 78.63 inches (W x D x H).

2.3 Пайвастшавӣ ба барқ

The merchandiser requires a dedicated 115/60/1 electrical supply with a NEMA-5-15R receptacle. Ensure the electrical supply matches the unit's requirements and that a qualified electrician performs the connection if necessary. Do not use extension cords.

2.4 Насби рафҳо

The unit comes with adjustable heavy-duty PVC coated wire shelves. Install the shelves by placing them on the shelf clips provided. Adjust the shelf height as needed to accommodate various product sizes. Ensure shelves are level and securely seated.

2.5 Фаъолияти дар

The merchandiser features double pane thermal insulated glass sliding doors. Ensure the doors slide smoothly and seal properly when closed to maintain optimal internal temperature.

3. Дастурҳои истифодабарӣ

3.1 Оғози ибтидоӣ

After connecting the unit to power, allow it to run for several hours to reach the desired operating temperature before loading products. The factory-set temperature range is typically 33°F to 38°F (0.5°C to 3.3°C).

3.2 Назорати ҳарорат

The merchandiser is equipped with a temperature control system. Refer to the control panel for specific instructions on adjusting the temperature settings. Maintain the recommended temperature range for optimal product preservation.

3.3 Боркунии маҳсулот

Load products evenly on the shelves. Do not block the internal air vents, as this can impede airflow and affect cooling performance. Avoid overloading shelves to prevent damage and ensure proper air circulation.

3.4 Равшании дохилӣ

The unit features LED interior lighting to illuminate products. The lighting can typically be controlled via a switch, allowing for enhanced product visibility.

4. Нигоҳдорӣ

Regular maintenance ensures the longevity and efficient operation of your merchandiser.

4.1 Тозакунии берун ва дохили

• берунӣ: Clean the exterior surfaces with a mild soap and water solution. Wipe dry with a soft cloth. Avoid abrasive cleaners.
• дохилӣ: Remove all products and shelves. Clean the interior with a mild, food-safe cleaning solution. Rinse thoroughly and dry before replacing products.
• Дарҳои шишагӣ: Use a glass cleaner for the doors. Avoid spraying directly onto the seals.

4.2 Тоза кардани кати конденсатор

The condenser coil should be cleaned regularly to maintain optimal cooling efficiency and prevent compressor strain. The unit features an easily accessible condenser coil. Refer to the technical diagrams for location and access. Use a brush or vacuum cleaner to remove dust and debris from the coil fins.

4.3 Системаи яхкунӣ

This merchandiser is equipped with an automatic defrost system. No manual defrosting is typically required. Ensure the drain pan is clear and free of obstructions.

5. Баррасии мушкилот

Пеш аз тамос бо хидмат, дубораview масъалаҳои умумӣ ва роҳҳои ҳалли зерин:

• Агрегат хунук намешавад: Check if the power cord is securely plugged in. Verify the circuit breaker has not tripped. Ensure the temperature control is set correctly. Clean the condenser coil if it is dirty.
• Садои аз ҳад зиёд: Check if the unit is level. Ensure no objects are vibrating against the unit. Verify fan blades are not obstructed.
• Об дар ошёна: Check if the drain line is clogged or disconnected. Ensure the unit is level.
• Doors Not Sealing Properly: Inspect door gaskets for damage or debris. Ensure shelves are not obstructing door closure.

Агар мушкилот пас аз кӯшиши ин роҳҳои ҳал идома ёбанд, бо мутахассисони баландихтисос тамос гиред.

6. Мушаххасоти

Figure 2: Technical specifications and dimensions.

Figure 3: Detailed technical drawing and warranty information.

7. Маълумот дар бораи кафолат

The True Manufacturing GDM-72-HC~TSL01 comes with a кафолати се сол on all parts and labor. Additionally, an additional two-year warranty is provided specifically for the compressor. This warranty covers defects in materials and workmanship under normal use and service.

For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official True Manufacturing webсайт.

8. Дастгирии муштариён

For technical assistance, parts, or service inquiries, please contact True Manufacturing customer support. When contacting support, please have your model number (GDM-72-HC~TSL01) and serial number readily available.

You can find more information and contact details on the official True Manufacturing webсайт: www.truemfg.com