Муқаддима
Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.
Дар қуттӣ чӣ ҳаст
Пеш аз оғози насбкунӣ тасдиқ кунед, ки ҳама ҷузъҳо мавҷуданд:
- LED Strip Light (5 meters) x 1
- DC12V Power Adapter x 1
- Connection Receiver x 1
- Идоракунии дурдаст x 1
- Instruction Manual (Japanese) x 1
Маълумот оид ба бехатарӣ
- Ин маҳсулот барои тарҳрезӣ шудааст танҳо истифодаи дарунӣ. Do not expose to water or high humidity.
- Боварӣ ҳосил кунед, ки пеш аз насб ё нигоҳдорӣ, таъминоти барқ канор карда шудааст.
- Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
- Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit.
- Аз дастрасии кӯдакон дур нигоҳ доред.
- If any part of the product is damaged, discontinue use immediately and contact support.
Ташкил кардан
Барои дуруст насб кардани чароғаки рахи LED-и худ ин қадамҳоро иҷро кунед:
- Тайёр кардани сатҳи: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
- Чен кардан ва буридан (ихтиёрӣ): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Шарҳ: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
- Тасмаро истифода баред: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Компонентҳои пайвастшавӣ: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
- Фаъол: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Дастурҳои амалиётӣ
The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.
Функсияҳои идоракунии дурдаст:
- Фаъол / Хомӯш: -ро пахш кунед тугмаи барқи сурх барои фурӯзон ё хомӯш кардани чароғҳо.
- Танзими равшанӣ: -ро истифода баред тугмаҳои тирчаи боло ва поён (labeled 'Brightness Adjust') to increase or decrease the light intensity.
- Интихоби ранг: Аз. интихоб кунед 20 рангҳои пешакӣ by pressing the corresponding color buttons.
- Усулҳои DIY: Дар Тугмаҳои DIY1-DIY6 allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
- Усулҳои динамикӣ:
- ТЕЗ/СУСТ: Суръати режимҳои динамикиро танзим кунед.
- АВТО: Ба таври худкор аз ҳама режимҳои динамикӣ мегузарад.
- Флеш: Аз байни рангҳо медурахшад.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- FADE3/FADE7: Аз 3 то 7 ранг пажмурда мешавад.
Нигоҳдорӣ
- Тозакунӣ: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Нигоҳдорӣ: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
- Нигоҳубини илтиёмӣ: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.
Мушкилкушо
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Тасмаи LED фурӯзон намешавад. | 1. Power adapter not plugged in. 2. Remote control insulation sheet not removed. 3. Connections are loose or incorrect. 4. Батареяи идоракунии дурдаст мурдааст. | 1. Ensure power adapter is securely plugged into an outlet. 2. Remove the clear plastic insulation sheet from the remote control battery compartment. 3. Check all connections, ensuring arrows align between the strip and receiver. 4. Replace the remote control battery (CR2025 or equivalent). |
| Идоракунии дурдаст ҷавоб намедиҳад. | 1. Remote not pointed at receiver. 2. Obstruction between remote and receiver. 3. Батареяи идоракунии дурдаст мурдааст. | 1. Point the remote directly at the receiver. 2. Remove any objects blocking the line of sight. 3. Батареяи идоракунии дурдастро иваз кунед. |
| Some sections of the strip are not lighting up. | 1. Damage to the LED strip. 2. Incorrect cutting. | 1. Inspect the strip for physical damage. If damaged, contact support. 2. Ensure cuts were made only at designated marks. |
Мушаххасоти
- Рақами модел: PR410082-RGB-JP
- Бренд: махав
- Навъи манбаи нур: LED (SMD5050)
- Миқдори LED: 150 LEDs (30 LEDs per meter)
- Дарозии тасма: 5 метр
- Истеъмоли қувваи барқ: 18 Вт
- Вуруди ҷилдиtage: DC12V 1.5A
- Имконоти ранг: RGB (20 preset colors + DIY modes)
- Усули назорат: 44-key IR Remote Control
- Истифодаи дарунӣ/берунӣ: Дарунӣ
- Хусусиятҳои махсус: Dimmable, Cuttable, 3M Adhesive, PSE Certified
- Андозаи баста: 13.1 x 10.7 x 6.7 см; 230 г.
Кафолат ва дастгирӣ
This Lepro LED Strip Light comes with a Кафолати 2 сол. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.
For further assistance, you can visit the official Lepro store on Amazon: Мағозаи Лепро Амазон
