Дастури корбар XTOOL TP150 TPMS Relearn Tool

1. Муқаддима

The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.

2. Маълумот оид ба бехатарӣ

Always observe the following safety precautions when operating the TP150 tool:

• Пеш аз истифода ҳама дастурҳоро бодиққат хонед.
• Асбобро дар шароити тар ё дар наздикии моеъ/газҳои оташгиранда кор накунед.
• Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable.
• Use only the accessories and parts specified by XTOOL.
• Асбобро аз кӯдакон дур нигоҳ доред.
• Properly dispose of old TPMS sensors and batteries according to local regulations.

3. Маҳсулот ба охир расидview

The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.

Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.

3.1. Хусусиятҳои асосӣ

• TPMS Activation: Activates all known OE and aftermarket TPMS sensors.
• TPMS Relearn: Supports OBD Relearn and Static Relearn for all sensors.
• TPMS Programming: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
• TPMS Diagnosis: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
• Намоиши маълумот дар вақти воқеӣ: Shows sensor ID, tire pressure, temperature, and sensor voltage.
• OE Sensor Information Check: Displays brand, part number, and frequency of OE sensors.

4. Танзимот

4.1. Танзимоти ибтидоии дастгоҳ

1. Кушодани: Carefully remove the TP150 tool and accessories from the packaging.
2. Фаъол: Барои фаъол кардани дастгоҳ тугмаи барқро пахш кунед.
3. Навсозии нармафзор: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)

4.2. Пайвастшавӣ ба Мошин

1. Порти OBDII-и мошинро, одатан дар зери панели панели тарафи ронанда ҷойгир кунед.
2. Боварӣ ҳосил кунед, ки оташгирандаи мошин дар ҳолати OFF аст.
3. Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
4. Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.

5. Дастурҳои истифодабарӣ

The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.

5.1. Activating TPMS Sensors

1. Аз менюи асосӣ, интихоб кунед "TPMS" or "Activate".
2. Choose the vehicle make, model, and year.
3. Интихоб кунед "Activate Sensor".
4. Hold the TP150 tool near each tire's valve stem and press the activation button.
5. The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.

5.2. Тартиби омӯзиши такрории TPMS

Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.

1. Аз менюи асосӣ, интихоб кунед "TPMS", пас "Relearn".
2. Истеҳсолкунанда, модел ва соли барориши воситаи нақлиётро интихоб кунед.
3. Choose the appropriate relearn method:
• Омӯзиши OBD: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
• Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
4. Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.

5.3. Programming XTOOL Sensors

The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.

1. Аз менюи асосӣ, интихоб кунед "TPMS", пас "Program Sensor".
2. Place the XTOOL sensor to be programmed near the TP150's antenna.
3. Яке аз усулҳои зерини барномасозиро интихоб кунед:
• Automatic ID Generation: The tool generates a new, unique sensor ID.
• Enter ID Manually: Input a specific sensor ID if known.
• Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
• Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
4. Follow the on-screen prompts to complete the programming.

5.4. Diagnosing TPMS System

1. Connect the TP150 to the vehicle's OBDII port.
2. Аз менюи асосӣ, интихоб кунед "TPMS", пас "Diagnose".
3. The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
4. Review the displayed DTCs to identify system faults.
5. After repairs, select "Clear DTCs" to erase the codes and reset the TPMS warning light.

6. Нигоҳдорӣ

• Тозакунӣ: Дастгоҳро бо нарм пок кунед, гamp матоъ. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.
• Нигоҳдорӣ: Store the TP150 in its protective case in a dry, cool environment when not in use.
• Навсозии нармафзор: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models and sensors.
• Нигоҳубини батарея: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.

7. Баррасии мушкилот

8. Мушаххасоти

9. Кафолат ва дастгирӣ

9.1. Маълумот дар бораи кафолат

XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL website for detailed warranty terms and conditions, including duration and coverage specifics.

9.2. Дастгирии техникӣ

For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:

• расмӣ Webсайт: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
• Дастгирии почтаи электронӣ: Ба бахши тамос дар бораи мансабдор муроҷиат кунед webсайт.
• Манбаъҳои онлайн: Many helpful guides and videos may be available on the XTOOL website or their official social media channels.

When contacting support, please have your product model (XT-TP150) and serial number ready.