1. Муқаддима
Thank you for choosing the lightmaXX LED Blinder 2. This professional stage lighting fixture is designed to provide powerful and versatile illumination for various applications. Featuring two 50-watt warm white COB LEDs, DMX control, and a strobe function, it offers robust performance and flexible integration into your lighting setup. Please read this manual thoroughly before operation to ensure safe and optimal use of your device.
2. Дастурамал оид ба бехатарӣ
Барои пешгирии зарбаи барқ, сӯхтор ё ҷароҳат ҳамеша чораҳои бехатарии зеринро риоя кунед:
- Ин дастгоҳ танҳо барои истифодаи касбӣ аст.
- Таъмини таъминоти барқ voltage ба талаботи дастгоҳ мувофиқат мекунад.
- Дастгоҳро зери борон ё намӣ нагузоред.
- Дастгоҳро ҳамеша ба васлаки барқии заминӣ пайваст кунед.
- Хонаро накушоед. Дар дохили он қисмҳои аз ҷониби корбар хидматшаванда вуҷуд надоранд. Ҳама хидматрасониро ба кормандони соҳибихтисос муроҷиат кунед.
- Аз таъсири бевоситаи чашм ба манбаи рӯшноӣ худдорӣ намоед.
- Барои пешгирӣ кардани гармии аз ҳад зиёд дар атрофи дастгоҳ вентилятсияи мувофиқро таъмин кунед.
- Always secure the device with a safety cable when mounting overhead.
- Пеш аз тоза кардан ё нигоҳдорӣ аз барқ ҷудо кунед.
3. Маҳсулот ба охир расидview
The lightmaXX LED Blinder 2 features a robust design with two powerful COB LEDs and intuitive controls.
Расми 3.1: Пеш view of the lightmaXX LED Blinder 2, showing the two illuminated COB LEDs.
Расми 3.2: Пеш view of the lightmaXX LED Blinder 2, illustrating the power cable connection point.
Figure 3.3: Rear panel of the lightmaXX LED Blinder 2, detailing the control display, DMX In/Out, Power In/Out, and safety rope attachment point.
Figure 3.4: Close-up of the control panel, showing the digital display and navigation buttons (MENU, UP, DOWN, ENTER).
3.1 Қисмҳо
- 2 x 50W Warm White COB LEDs
- Digital Display and Control Buttons (MENU, UP, DOWN, ENTER)
- DMX In/Out (3-pin XLR)
- Power In/Out (IEC)
- Қавси васлшавандаи танзимшаванда
- Safety Rope Attachment Point
4. Танзимот
4.1 Васлкунӣ
The lightmaXX LED Blinder 2 comes with a versatile mounting bracket for truss, floor, or stand mounting. Ensure the mounting surface or structure can safely support the weight of the fixture. Always use a safety cable (not included) when mounting the unit overhead to prevent accidental falls.
- Attach the mounting bracket securely to a truss clamp ё истода.
- Adjust the angle of the fixture using the side knobs on the bracket.
- Connect a safety cable from the fixture's safety rope attachment point to the mounting structure.
4.2 Пайвастшавии барқ
Connect the supplied power cable to the "POWER IN" IEC connector on the rear of the unit and then to a suitable grounded power outlet. The "POWER OUT" connector allows for daisy-chaining power to multiple units (check maximum power draw before connecting multiple units).
4.3 Пайвасти DMX (ихтиёрӣ)
For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port on the blinder. To daisy-chain multiple DMX fixtures, connect a DMX cable from the "DMX OUT" port of the first blinder to the "DMX IN" port of the next fixture in the chain. Terminate the last fixture in the DMX chain with a DMX terminator.
5. Дастурҳои истифодабарӣ
5.1 Фаъолияти панели идоракунӣ
Use the four buttons on the rear panel to navigate the menu and adjust settings:
- Меню: Enters the menu or goes back to the previous menu level.
- ТО: Scrolls up through menu options or increases a value.
- ПОШ: Scrolls down through menu options or decreases a value.
- Ворид кардан: Интихобро тасдиқ мекунад ё ба зерменю ворид мекунад.
5.2 DMX Modes and Channel Assignment
The lightmaXX LED Blinder 2 supports 6 DMX channels. Refer to the DMX chart below for specific channel functions. Set the DMX address using the control panel. The default DMX address is A001.
| Канал | Функсия | Диапазони арзиш | Тавсифи |
|---|---|---|---|
| 1 | Устод Диммер | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) |
| 2 | LED 1 Диммер | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 1 |
| 3 | LED 2 Диммер | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 2 |
| 4 | Таъсири Strobe | 0-255 | 0 = No Strobe, 1-127 = Strobe Speed, 128-255 = Pulse/Random Strobe |
| 5 | Барномаҳои дарунсохт | 0-255 | Selects various pre-programmed light shows |
| 6 | Суръати барнома | 0-255 | Adjusts the speed of selected built-in programs |
5.3 Standalone Modes
The blinder can operate without a DMX controller using its built-in programs or sound-activated mode. Access these modes via the control panel menu.
- Режими худкор: Cycles through pre-programmed light sequences.
- Ҳолати садои фаъол: The light reacts to ambient sound via the built-in microphone.
- Manual Dimmer: Adjust the brightness of each LED directly from the menu.
6. Нигоҳдорӣ
Regular maintenance ensures the longevity and optimal performance of your lightmaXX LED Blinder 2.
- Тозакунӣ: Disconnect the power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp матоъро истифода бурдан мумкин аст. Тозакунандаҳои абразивӣ ё ҳалкунандаҳоро истифода набаред.
- Fan and Vent Cleaning: Periodically check and clean the cooling fan and ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.
- Санҷиши кабелӣ: Regularly inspect power and DMX cables for any signs of damage (cuts, frayed wires). Replace damaged cables immediately.
- Нигоҳдорӣ: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a suitable flight case.
7. Баррасии мушкилот
If you encounter issues with your lightmaXX LED Blinder 2, refer to the following common problems and solutions:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Не қудрат | Power cable disconnected; no power from outlet; blown fuse. | Check power cable connection; test outlet with another device; check and replace fuse if necessary (refer to qualified technician). |
| Назорати DMX нест | Incorrect DMX address; faulty DMX cable; no DMX signal from controller; DMX terminator missing. | Verify DMX address matches controller; test DMX cable; ensure DMX controller is sending signal; add DMX terminator to the last fixture. |
| Чароғҳо милт-милт мекунанд ё номунтазам рафтор мекунанд | Poor DMX signal; electrical interference; overheating. | Check DMX cable quality and connections; ensure proper grounding; provide adequate ventilation. |
| Агрегат аз ҳад зиёд гарм мешавад | Вентилятсияи басташуда; кор дар ҳарорати баланди муҳит. | Clear all ventilation openings; ensure sufficient space around the unit for airflow; operate within specified temperature range. |
If the problem persists after trying these solutions, please contact lightmaXX customer support or your authorized dealer.
8. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Бренд | lightmaXX |
| Рақами модел | LIG0016526-000 |
| Манбаи нур | 2 x 50W COB Warm White LEDs |
| Каналҳои DMX | 6 канал |
| Усулҳои назорат | DMX, Auto, Sound Active, Manual |
| Андозаҳо (L x W x H) | 31.2 x 18.7 x 18.5 см (тақрибан 12.28 x 7.36 x 7.28 дюйм) |
| Манбаи нерӯ | Электри симдор |
| Навъи насб | Васлкунии шифт (бо кронштейн) |
| Ранги | Сиёҳ |
9. Кафолат ва дастгирӣ
Specific warranty information for the lightmaXX LED Blinder 2 is not provided in this manual. Please refer to your purchase documentation, the lightmaXX official website, or contact your retailer for details regarding warranty coverage and terms.
For technical support, service, or spare parts inquiries, please contact lightmaXX customer service or your authorized dealer. Ensure you have your model number (LIG0016526-000) and purchase date available when contacting support.
Manufacturer: lightmaXX
