NovaStar MSD300-1 LED Display Sending Card User Manual

1. Муқаддима

This manual provides detailed instructions for the installation, operation, and maintenance of the NovaStar MSD300-1 LED Display Sending Card. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

2. Маҳсулот ба охир расидview

The NovaStar MSD300-1 is a high-performance sending card designed for LED display applications. It facilitates the transmission of video signals from a computer to an LED display, supporting various resolutions and configurations.

2.1 Хусусиятҳои асосӣ

• 1x SL-DVI Input Connector: For connecting to a video source.
• 2x Gigabit Ethernet Outputs: For connecting to LED receiving cards.
• 1x Light Sensor Connector: For automatic brightness adjustment.
• 1x Type-B USB Control Port: For PC communication and configuration.
• 2x UART Control Ports: Used for device cascading, allowing up to 20 devices to be linked.

2.2 Тавсифи маҳсулот

The MSD300-1 is an evolution of the original MSD300, with the audio jack removed due to infrequent use. This sending card supports input resolutions up to 1920×1200@60Hz and can load up to 1,300,000 pixels. Its communication with a PC is established via a type-B USB port. The ability to cascade multiple MSD300-1 units via UART ports makes it suitable for larger or more complex display setups. This cost-effective solution is ideal for rental and fixed installations, including concerts, live events, security monitoring centers, and various sports venues.

Расми 1: кунҷӣ view of the NovaStar MSD300-1 LED Display Sending Card, highlighting its DVI input, dual Ethernet outputs, and USB control port.

Расми 2: Аз боло ба поён view of the NovaStar MSD300-1 circuit board, illustrating the layout of its components and connectors.

3. Танзим ва насб

Follow these steps to properly install and connect your MSD300-1 sending card.

3.1 Насби сахтафзор

1. Хомӯш: Ensure all devices, including your computer and LED display, are powered off before installation.
2. Кортро ворид кунед: Carefully insert the MSD300-1 sending card into an available PCI-E slot on your computer's motherboard. Secure it with the provided screw.
3. Connect DVI Input: Connect a DVI cable from your computer's graphics card DVI output to the DVI input port on the MSD300-1.
4. Connect Ethernet Outputs: Connect standard Ethernet cables from the two Gigabit Ethernet output ports on the MSD300-1 to the input ports of your LED display's receiving cards. Ensure proper cable routing and secure connections.
5. Connect USB Control: Connect a Type-B USB cable from your computer's USB port to the Type-B USB control port on the MSD300-1. This connection is essential for configuration and control.
6. Light Sensor (Optional): If using a light sensor for automatic brightness adjustment, connect it to the designated light sensor connector on the card.
7. UART Cascading (Optional): If cascading multiple MSD300-1 units, connect them using UART cables between the UART control ports.

3.2 Насби нармафзор

After hardware installation, install the necessary control software (e.g., NovaLCT-Mars) on your computer. Refer to the software's specific manual for detailed installation and configuration instructions. The USB connection will allow the software to detect and configure the sending card.

4. Дастурҳои истифодабарӣ

Once the MSD300-1 is installed and configured, you can begin operating your LED display.

1. Фаъол: Power on your computer and the LED display.
2. Оғози нармафзор: Open the NovaStar control software (e.g., NovaLCT-Mars) on your computer.
3. Detect Card: The software should automatically detect the connected MSD300-1 sending card via the USB connection.
4. Танзими намоиш: Use the software to configure the LED display parameters, including resolution, screen mapping, brightness, and color settings. This step is crucial for optimal display performance.
5. Send Content: Once configured, the MSD300-1 will transmit the video signal from your computer to the LED display. Ensure your computer's display settings are correctly configured to output to the DVI port connected to the MSD300-1.
6. Танзимотро танзим кунед: Adjust brightness, contrast, and other display parameters as needed through the control software.

5. Нигоҳдорӣ

Proper maintenance ensures the longevity and reliable operation of your MSD300-1 sending card.

• Тоза нигоҳ доред: Regularly clean the card and its connectors to prevent dust accumulation, which can lead to overheating or poor connections. Use a soft, dry cloth or compressed air.
• Назорати муҳити зист: Operate the card within its specified temperature and humidity ranges. Avoid extreme conditions.
• Пайвастҳои бехатар: Periodically check all cable connections (DVI, Ethernet, USB) to ensure they are secure and free from damage.
• Навсозии нармафзор: Keep your NovaStar control software updated to the latest version to benefit from performance improvements and bug fixes.
• Идоракунии нерӯ: Always power down your system properly before disconnecting or connecting any hardware components.

6. Баррасии мушкилот

This section addresses common issues you might encounter with the MSD300-1.

6.1 No Display on LED Screen

• Санҷиши нерӯ: Ensure the LED display and computer are powered on.
• Тасдиқи пайвастҳо: Confirm that the DVI cable from the computer to the MSD300-1 and the Ethernet cables from the MSD300-1 to the LED display are securely connected.
• DVI Source: Ensure your computer's display output is correctly set to the DVI port connected to the MSD300-1.
• Танзимоти нармафзор: Open the NovaStar control software and verify that the sending card and display parameters are correctly configured. Re-send the configuration if necessary.
• Насби драйвер: Ensure the graphics card drivers on your computer are up-to-date.

6.2 Sending Card Not Detected by Software

• Пайвасти USB: Check the USB Type-B cable connection between the MSD300-1 and your computer. Try a different USB port or cable.
• Card Seating: Ensure the MSD300-1 is properly seated in its PCI-E slot.
• Версияи нармафзор: Ensure you are using a compatible version of the NovaStar control software.
• Computer Restart: Компютери худро бозоғоз намоед ва бори дигар кӯшиш кунед.

6.3 Flickering or Unstable Display

• Сифати кабелӣ: Use high-quality DVI and Ethernet cables. Damaged or low-quality cables can cause signal issues.
• Ҳал / суръати навсозӣ: Ensure the output resolution and refresh rate configured in the software match the capabilities of your LED display.
• Ба заминканӣ: Verify proper grounding of all equipment to prevent electrical interference.
• Омилҳои муҳити зист: Дар наздикии он манбаъҳои қавии электромагнитиро тафтиш кунед.

7. Мушаххасоти

Below are the technical specifications for the NovaStar MSD300-1 LED Display Sending Card.

8. Кафолат ва дастгирӣ

For warranty information and technical support, please refer to the official NovaStar webсайт ё дилери ваколатдори худ тамос гиред. Квитансияи хариди худро ҳамчун далели харид барои даъвоҳои кафолат нигоҳ доред.

Барои гирифтани маълумоти бештар, шумо метавонед ба мағозаи расмии Novastar муроҷиат кунед: Мағозаи Novastar дар Amazon