VONROC 1500W 216mm Electric Sliding Miter Saw Instruction Manual

1. Дастурамал оид ба бехатарӣ

Always observe basic safety precautions when using this electric sliding miter saw to reduce the risk of fire, electric shock, and serious personal injury. Read all instructions carefully before operation.

Бехатарии умумии асбобҳои барқ

• Бехатарии минтақаи корӣ: Майдони корро тоза ва равшан нигоҳ доред. Ҷойҳои бесарусомон ё торик ба садамаҳо даъват мекунанд. Асбобҳои барқиро дар муҳити тарканда, масалан, дар ҳузури моеъҳои оташгиранда, газҳо ё чанг истифода набаред.
• Бехатарии барқ: Штепсельҳои асбоби барқӣ бояд ба розетка мувофиқат кунанд. Ҳеҷ гоҳ симро ба ҳеҷ ваҷҳ тағир надиҳед. Аз тамоси бадан бо сатҳҳои заминӣ ё заминӣ, аз қабили қубурҳо, радиаторҳо, диапазонҳо ва яхдонҳо худдорӣ намоед.
• Бехатарии шахсӣ: Always wear eye protection (safety goggles) and hearing protection. Use a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.

Miter Saw Specific Safety

• Бехатарии пиёз: Ensure the blade is sharp and correctly installed. Never attempt to cut freehand. Always use the material clamp and fence to secure the workpiece.
• Роҳнамои лазерӣ: Do not stare directly into the laser beam. The laser is a Class 2 laser product.
• Ҷамъоварии хок: Connect a dust extraction device or use the provided dust bag to minimize dust exposure.
• Навкор: The saw features a soft start system. Allow the blade to reach full speed before beginning a cut.

2. Маҳсулот ба охир расидview

The VONROC 1500W 216mm Electric Sliding Miter Saw is designed for precise cutting of wood, laminate, and similar materials. It features a powerful motor, a sliding function for wider cuts, and a laser guide for accuracy.

Қисмҳои асосӣ

• Saw Head with Motor and Blade
• Роҳҳои слайд
• Base Plate / Turntable
• Miter Scale and Lock Handle
• Bevel Adjustment and Lock
• Қисмати корӣ Clamp
• Ҷадвалҳои васеъ
• Dust Port and Dust Bag
• Дастури лазерӣ

Расми 1: Пурра view of the VONROC 1500W 216mm Electric Sliding Miter Saw.

3. Танзимот

Кушодан ва васлкунӣ

1. Ҳама ҷузъҳоро аз бастабандӣ бодиққат хориҷ кунед.
2. Inspect the saw for any damage that may have occurred during transit. Do not operate if damaged.
3. Attach the dust bag to the dust port at the rear of the saw head.
4. Install the extension tables on both sides of the base plate, securing them with the provided fasteners.

Монтажи арра

For stable operation, it is recommended to mount the miter saw to a workbench or a dedicated miter saw stand. Use the mounting holes in the base of the saw and appropriate hardware (not included) to secure it firmly.

Танзими девор

The fence provides support for the workpiece. Ensure it is properly aligned and secured before making any cuts. The fence can be adjusted for different cutting angles and material thicknesses.

Figure 2: The sliding mechanism and adjustable fence provide support and allow for wider cuts.

Laser Guide Alignment

The laser guide projects a line onto the workpiece, indicating the cutting path. To activate, press the laser button. If the laser line is not aligned with the blade's kerf, consult the troubleshooting section for adjustment instructions.

Figure 3: The integrated laser guide assists in precise cutting by projecting a visible line.

4. Амалиёт

Тартиби буридани асосӣ

1. Корти бехатар: Place the workpiece firmly against the fence and base. Use the material clamp to hold it securely.
2. Танзими кунҷ: Adjust the miter angle by loosening the lock handle, rotating the turntable to the desired angle (e.g., 0°, 15°, 22.5°, 30°, 45°), and then tightening the lock handle.
3. Set Bevel: For bevel cuts, loosen the bevel lock, tilt the saw head to the desired angle (e.g., 0° to 45°), and tighten the lock.
4. Оғози арра: Press the trigger switch. Allow the blade to reach full speed before lowering it into the workpiece.
5. Буридан: Slowly lower the saw head through the workpiece. For sliding cuts, pull the saw head towards you, lower it, and push it smoothly through the material.
6. Release Saw: Пас аз анҷоми буриш, триггерро раҳо кунед ва пеш аз бардоштани сари арра, имкон диҳед, ки теғ пурра бозистад.

Figure 4: The turntable allows for precise miter angle adjustments from -45° to +45°.

Figure 5: The saw head can be tilted for accurate bevel cuts up to 45°.

Функсияи лағжиш

The sliding function allows for cutting wider workpieces than a standard miter saw. To use, unlock the sliding mechanism (if applicable), pull the saw head forward, lower the blade into the material, and push the saw head smoothly back through the workpiece. Ensure the workpiece is fully supported throughout the cut.

5. Нигоҳдорӣ

Regular maintenance ensures the longevity and safe operation of your miter saw. Always disconnect the saw from the power supply before performing any maintenance.

Иваз кардани пиёз

1. Қувваи барқро ҷудо кунед.
2. Raise the blade guard.
3. Use the provided wrench to loosen the arbor nut while holding the arbor lock button.
4. Carefully remove the old blade and install the new blade, ensuring the teeth are oriented correctly.
5. Гайкаи арборро мустаҳкам маҳкам кунед.

Тозакунӣ

• Regularly empty the dust bag or vacuum the dust port.
• Clean the saw's exterior with a damp матоъ. Аз маводи кимиёвии сахт истифода набаред.
• Keep the sliding rails clean and free of debris for smooth operation.

Молидани

Apply a thin layer of light machine oil to the sliding rails periodically to ensure smooth movement of the saw head.

6. Баррасии мушкилот

7. Мушаххасоти

8. Кафолат ва дастгирӣ

VONROC products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official VONROC website. For technical support, spare parts, or service inquiries, please contact VONROC customer service through their official channels.

Лутфан далели хариди худро барои ҳама даъвоҳои кафолат нигоҳ доред.