MOUNTUP Ultrawide Single Monitor Arm Instruction Manual

1. Муқаддима

Thank you for choosing the MOUNTUP Ultrawide Single Monitor Arm, Model MU7007. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.

2. Маълумот оид ба бехатарӣ

Ҳангоми насб ва истифода чораҳои бехатарии зеринро риоя кунед:

• Иқтидори максималии вазнро аз 33 фунт (15 кг) зиёд накунед.
• Ensure your monitor's VESA pattern is compatible (75x75mm or 100x100mm).
• Verify that your desk surface is strong enough to support the combined weight of the monitor arm and your monitor.
• Always use the provided hardware and follow installation steps carefully.
• Ҳангоми насб кӯдакон ва ҳайвонотро аз дур нигоҳ доред.
• Adjust the gas spring tension only when the arm is in a horizontal position to prevent sudden movement.

3. Мундариҷаи баста

Лутфан, санҷед, ки ҳамаи қисмҳо мавҷуданд ва осеб надидаанд:

• Мониторинги Ассамблея
• Пласти ҷудошавандаи VESA
• C-Clamp База
• Grommet Base (Optional)
• Маҷмӯи таҷҳизоти васлкунӣ (винтҳо, шайбаҳо, фосилагузорҳо)
• Аллен Калидҳо
• Дастури дастурӣ

Image: All components of the MOUNTUP Ultrawide Single Monitor Arm, showing the main arm, the C-clamp mounting option, and the grommet mounting option.

4. Мушаххасоти

Image: The monitor arm supporting an ultrawide screen, highlighting its compatibility with screens up to 40 inches and a weight capacity of 30.9 lbs.

5. Танзим ва насб

The MOUNTUP monitor arm offers two installation methods: C-Clamp ва Громмет Маунт.

5.1. Choose Your Mounting Method

Determine which mounting method is suitable for your desk. The C-clamp is drill-free, while the grommet mount requires a hole in your desk.

5.2. C-Clamp Насбкунӣ

1. C-cl-ро замима кунедamp то поёни сутуни асосӣ.
2. Place the monitor arm assembly onto your desk edge.
3. C-cl-ро пурзӯр кунедamp screw until the arm is securely fastened to the desk.

5.3. Grommet Mount Installation (Optional)

1. If your desk has a grommet hole, or you plan to drill one, attach the grommet base plate to the bottom of the main pole.
2. Insert the pole through the grommet hole.
3. Secure the base from underneath the desk using the provided hardware.

5.4. Часпондани монитор

1. Attach the detachable VESA plate to the back of your monitor using the appropriate VESA screws and spacers from the hardware kit. Ensure the screws are tightened securely.
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head until it clicks into place.
3. Tighten the security screw on the VESA head to prevent accidental detachment.

Image: A woman demonstrating the easy installation process, attaching a monitor to the arm using the detachable VESA plate, indicating setup can be completed within 15 minutes.

6. Фаъолият ва танзимот

The MOUNTUP monitor arm offers extensive adjustability for optimal ergonomic positioning.

6.1. Танзими шиддати пружинаи газ

The gas spring tension needs to be adjusted to match your monitor's weight. If the monitor rises too easily or drops, adjust the tension:

• Монитор баланд мешавад: Turn the adjustment screw (located on the arm joint) clockwise (towards the "-" direction) to reduce tension for lighter monitors.
• Монитор ба поён меафтад: Turn the adjustment screw counter-clockwise (towards the "+" direction) to increase tension for heavier monitors.
• Муҳим: Hold the arm in a horizontal position during adjustment to prevent sudden movement.

6.2. Танзими баландӣ

Once the gas spring tension is correctly set, you can freely move the monitor up and down to your desired height. The arm allows for a height adjustment range of 13 inches, with a minimum height of 6.7 inches and a maximum height of 19.7 inches from the desk surface.

6.3. Танзими кунҷи тамға

To adjust the monitor's tilt angle:

1. Loosen the tilting bolt (turn towards the "-" direction) on the VESA head.
2. Adjust the monitor to your desired tilt angle (+90° to -45°).
3. Retighten the tilting bolt (turn towards the "+" direction) to secure the angle.

6.4. Гардшавӣ ва гардиш

• Чарх: The arm joints allow for 180° swivel, and the VESA plate can swivel 360°, providing flexibility to share your screen or adjust viewкунҷҳо.
• Ротатсия: The VESA plate supports 360° rotation, allowing you to switch your monitor between landscape and portrait orientations.

Image: Detailed instructions for adjusting the gas spring tension and the monitor's tilt angle using an Allen wrench.

Image: Visual representation of the monitor arm's full range of motion, including tilt (+90°/-45°), 360° swivel at arm joints, and 360° rotation for portrait/landscape viewing.

Image: A diagram illustrating the free height adjustment capabilities, showing minimum height (6.7"), maximum height (19.7"), and maximum extension (22.6").

6.5. Идоракунии кабел

The monitor arm features integrated cable management to keep your workspace tidy. Route your cables through the removable covers on the arm and the base. The base also includes two USB connectors for convenient access (USB cable not included).

Image: A visual guide demonstrating the routing of cables through the detachable USB connector integrated into the monitor arm's base, promoting a clutter-free desk.

7. Нигоҳдорӣ

Regular maintenance ensures the longevity and optimal performance of your monitor arm:

• Тозакунӣ: Wipe the arm and base with a soft, damp матоъ. Аз тозакунандаи абразивӣ худдорӣ кунед.
• Пайвастҳоро тафтиш кунед: Periodically check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
• Баҳори газ: The gas spring is designed for long-term use (over 20,000 cycles) and generally requires no specific maintenance beyond initial tension adjustment.

8. Баррасии мушкилот

If you encounter issues with your MOUNTUP monitor arm, refer to the following common problems and solutions:

8.1. Monitor Sags or Does Not Hold Position

• Сабаб: Gas spring tension is too low for the monitor's weight.
• Ҳалли: Increase the gas spring tension by turning the adjustment screw counter-clockwise (towards the "+" direction) as described in Section 6.1.

8.2. Monitor Floats Up or is Difficult to Push Down

• Сабаб: Gas spring tension is too high for the monitor's weight.
• Ҳалли: Decrease the gas spring tension by turning the adjustment screw clockwise (towards the "-" direction) as described in Section 6.1.

8.3. Monitor Tilts Forward or Backward Unexpectedly

• Сабаб: The tilt angle bolt on the VESA head is loose.
• Ҳалли: Retighten the tilt angle bolt as described in Section 6.3.

8.4. Arm Feels Loose or Unstable

• Сабаб: Мизи клamp or grommet mount is not sufficiently tightened.
• Ҳалли: Recheck and tighten the C-clamp or grommet mounting hardware securely.

9. Кафолат ва дастгирӣ

MOUNTUP stands behind the quality and durability of its products. This monitor arm comes with a 3-year support period, ensuring its strength and reliability.

For further assistance, technical support, or warranty claims, please contact MOUNTUP customer service through the retailer where you purchased the product or visit the official MOUNTUP webсайт барои маълумоти тамос.