EMOS ZM4328

EMOS ZM4328 TORI LED Ceiling Light 15W with MW Sensor Instruction Manual

Модели: ZM4328

1. Муқаддима

This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.

EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty label

Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.

2. Дастурамал оид ба бехатарӣ

  • Бехатарии барқ: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before installation or maintenance.
  • Ҷилдиtage: This product operates on a 230V AC power supply.
  • Рейтинги IP54: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
  • Манбаи нур: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
  • Ҳарорати корӣ: Ensure the operating environment is within the specified temperature range to prevent damage.

3. Мундариҷаи баста

Пеш аз оғози насбкунӣ тасдиқ кунед, ки ҳама ҷузъҳо мавҷуданд:

  • 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
  • Mounting accessories (screws, wall plugs, foam pads)
Mounting screws, wall plugs, and foam pads for EMOS ZM4328 TORI LED Ceiling Light

Figure 2: Included mounting accessories.

4. Танзим ва насб

Барои насби дуруст ин қадамҳоро иҷро кунед:

  1. Хомӯш кардани барқ: Пеш аз оғоз, боварӣ ҳосил кунед, ки манбаи асосии барқ ​​ба минтақаи насб дар автомати муҳофизатӣ хомӯш карда шудааст.
  2. Тайёр кардани сатҳи васлкунӣ: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
  3. Кронштейн васлкунӣ: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Бозгашт view of EMOS ZM4328 TORI LED Ceiling Light showing mounting bracket

Расми 3: Қафо view with mounting bracket.

  1. Ноқил: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Close-up of the wiring terminal inside the EMOS ZM4328 TORI LED Ceiling Light

Figure 4: Wiring terminal connection points.

  1. Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
  2. Барқарор кардани қудрат: Switch the main power supply back on.

5. Дастурҳои истифодабарӣ

The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.

Функсияи сенсори ҳаракат

  • The microwave motion detector reacts to movement within a range of up to 6 meters.
  • Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
  • The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.

Adjusting Sensor Settings (DIP Switches)

The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.

Close-up of DIP switches for adjusting sensor settings on EMOS ZM4328 TORI LED Ceiling Light

Figure 5: DIP switches for sensor configuration.

Refer to the markings next to the DIP switches for specific settings related to:

  • Диапазони ошкор: Adjusts the maximum distance at which motion is detected.
  • Вақти нигоҳдорӣ: Sets the duration the light remains on after the last detected motion.
  • Daylight Sensor (Lux Level): Determines the ambient light level at which the sensor becomes active. For example, you can set it to only activate when it's dark.

Шарҳ: Always disconnect power before adjusting DIP switches to avoid electrical hazards.

6. Нигоҳдорӣ

  • Тозакунӣ: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
  • Муҳофизати ҳашарот: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
  • Ягон қисмҳои хидматрасонии корбар: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.

7. Баррасии мушкилот

If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:

МушкилотСабаби эҳтимолӣҲалли
Чароғ фурӯзон намешавад.Не таъминоти барқ.
Ноқилҳои нодуруст.
Daylight sensor setting too high.
Пайвасти барқ ​​ва автомати муҳофизатиро тафтиш кунед.
Verify wiring connections (Live, Neutral).
Adjust the daylight sensor (Lux) setting on the DIP switches.
Нур доимо фурӯзон аст.Ҳаракати доимӣ муайян карда шуд.
Hold time setting too long.
Норасоии сенсор.
Ensure no constant movement in the detection area.
Adjust the hold time setting on the DIP switches to a shorter duration.
Агар мушкилот боқӣ монад, бо дастгирии дастгирӣ тамос гиред.
Light turns on/off too frequently.Sensitivity too high.
Detection range too wide.
Reduce the sensitivity and/or detection range using the DIP switches.
Sensor does not detect motion.Sensitivity too low.
Detection range too narrow.
Сенсори бастани монеаҳо.
Daylight sensor setting too low (light always on).
Increase sensitivity and/or detection range via DIP switches.
Ensure no large metal objects or thick walls are directly in front of the sensor.
Adjust the daylight sensor (Lux) setting.

8. Мушаххасоти

БрендEMOS
Рақами моделZM4328
Андозаҳо (Диаметр x Баландӣ)220 мм x 53 мм (тақрибан 8.66 дюйм x 2.09 дюйм)
Вазн622 грамм (тақрибан 1.37 фунт)
Қувва15 Ватт
Ҷараёни рӯшноӣ1500 люмен
Ҳарорати ранг4000 Келвин (сафеди бетараф)
Индекси намоиши ранг (CRI)80
Incandescent Equivalence100 Ватт
Ҷилдиtage230 Вольти AC
Рейтинги IPIP54
МатериалAcrylonitrile Butadiene Styrene (ABS), Plastic diffuser
Хусусиятҳои махсусMicrowave Motion Detector, Energy-saving, Waterproof
Синфи самаранокии энергияE (on new scale from 1.9.2021)
Diagram showing dimensions of EMOS ZM4328 TORI LED Ceiling Light: 220mm diameter, 53mm height

Расми 6: Андозаҳои маҳсулот.

Energy efficiency label showing class E for the EMOS ZM4328 TORI LED Ceiling Light

Figure 7: Energy Efficiency Label (Class E).

9. Кафолат ва дастгирӣ

Кафолат

This EMOS ZM4328 TORI LED Ceiling Light comes with a Кафолати 3 сол аз рӯзи харид. Лутфан далели хариди худро барои даъвоҳои кафолат нигоҳ доред. Кафолат камбудиҳои мавод ва коркардро ҳангоми истифодаи муқаррарӣ фаро мегирад.

Дастгирии муштариён

For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS webсайт.