This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Koblenz Contractor Wet Dry Vacuum Cleaner, Model WD-6 C212. This versatile 6-gallon, 5.0 Peak HP vacuum is designed for both wet and dry messes, and also functions as a powerful blower, making it suitable for various cleaning tasks.
Image: The Koblenz Contractor Wet Dry Vacuum Cleaner with callouts for lightweight design, swivel casters, cartridge filter, corded electric power, various accessories, and suitability for multiple surfaces.
Маълумоти муҳим оид ба бехатарӣ
Read all instructions carefully before using the appliance. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
Always disconnect from power supply before servicing.
Image: A visual representation of the Koblenz Wet Dry Vacuum and all its included accessories, such as the hose, extension wands, various nozzles, and filter.
Ташкил кардан
1. Attaching Casters
Insert the four swivel casters into the designated holes on the bottom of the vacuum tank. Push firmly until they click into place, ensuring secure attachment for mobility.
2. Пайваст кардани шланг
Connect the 1-7/8 inch x 7 feet CLICK-N-LOCK EVA Hose to the intake port on the front of the vacuum for suction mode. For blower functionality, attach the hose to the exhaust port located on the motor head.
3. Filter Installation (Dry vs. Wet)
For dry vacuuming, ensure the cartridge filter is securely installed over the motor housing inside the tank. For wet vacuuming, the cartridge filter must be removed. A foam filter (not included, but typically used for wet applications) can be installed if desired, but the unit can operate for wet pickup without it.
Image: An exploded diagram illustrating the main components of the vacuum: powerful motor, intake port, reliable safety protection, cartridge filter, and tip-over resistant base design.
4. Cord Management
Utilize the built-in cord management system on the vacuum's motor head to neatly store the power cord when not in use, preventing tangles and ensuring easy access.
Дастурҳои амалиётӣ
1. Фаъол/хомӯш
Plug the power cord into a grounded electrical outlet. Press the yellow power switch located on the top of the motor head to turn the vacuum on or off.
Тасвир: Аз боло ба поён view of the Koblenz Wet Dry Vacuum, clearly showing the yellow power switch on the motor head.
2. Чангкунаки хушк
Ensure the cartridge filter is installed. Attach the hose to the intake port. Select the appropriate accessory (e.g., Pick Up Tool, Crevice Tool) for the surface you are cleaning. Move the nozzle over the dry debris to collect it.
3. Вакуумкунии тар
Remove the cartridge filter before wet vacuuming. Attach the hose to the intake port. Use the Floor-Squeegee Tool for efficient liquid pickup. Move the squeegee over the liquid spills to collect them into the tank.
4. Функсияи шамолдиҳанда
To use the blower function, detach the hose from the intake port and securely attach it to the exhaust port on the motor head. The vacuum will now expel air, allowing you to clear debris from surfaces or inflate items.
Тасвир: Тарафи наздик view of the Koblenz Wet Dry Vacuum, highlighting the exhaust port on the motor head used for the blower function.
5. Истифодаи лавозимот
The vacuum comes with various HOOK-N-STORE accessories. Attach extension wands for extended reach. Use the Pick Up Tool for general debris, the Crevice Tool for tight spaces, and the Floor-Squeegee Tool for liquids or by removing the squeegee insert, for dry floor cleaning.
Image: A display of the various accessories included with the vacuum, such as the cartridge filter, extension wands, pick-up tool, crevice tool, and floor-squeegee tool.
Нигоҳдорӣ
1. Холӣ кардани зарф
Regularly empty the 6-gallon tank to maintain optimal suction performance. For dry debris, unlatch the motor head and carefully lift it off. Dispose of collected debris. For liquids, unlatch the motor head and pour out the liquid from the tank.
2. Cleaning/Changing Filters
For dry use, periodically blow dust off the cartridge filter to maintain suction. Replace the cartridge filter (Koblenz part numbers: 45-1168-00-9 Standard, 45-1170-00-5 Fine dust, 45-1169-00-7 Washable) after multiple cleanings or when performance decreases. For wet use, ensure the foam filter (if used) is clean and free of debris.
3. Нигоҳубини шланг ва лавозимот
Inspect the 1-7/8 inch x 7 feet EVA hose and all accessories for blockages or damage before and after each use. Clear any obstructions to ensure proper airflow. Store accessories using the HOOK-N-STORE system around the tank's perimeter.
Мушкилкушо
Мушкилот
Сабаби эҳтимолӣ
Ҳалли
Не қудрат
Not plugged in; tripped circuit breaker
Ensure cord is securely plugged into a working outlet; check and reset circuit breaker.
Сохти паст
Clogged hose/filter; full tank; incorrect filter for application
Check hose and accessories for blockages; clean or replace filter; empty tank; ensure correct filter is used (remove cartridge for wet).
Мотор кор мекунад, аммо намакоб нест
Hose not properly attached; blockage in hose/nozzle
Ensure hose is securely connected to the intake port; clear any blockages in the hose or nozzle.
Мушаххасоти
Бренд: Кобленц
Номи модел: WD-6 C212
Иқтидори: 6 галлон
Қувваи аспи мотор: 5.0 Қуллаи HP
Ватtage: 960 ватт
Ampхашмгин: 8 Amps
Ҳаҷми ҳадди аксар: 77 Inches (water lift)
Дарозии шланг: 7 Feet (1-7/8 Inch diameter)
Манбаи нерӯ: Электри симдор
Дарозии сим: 20 фут
Вазни ашё: 14 фунт
Андозаҳои маҳсулот: 13.97"L x 13.97"W x 19.75"H
Навъи филтр: Cartridge (Standard, Fine dust, Washable options available)
Хусусиятҳои махсус: Tip-Over resistant tank, Rain protected motor head, CLICK-N-LOCK hose, HOOK-N-STORE accessory system
Image: The Koblenz Contractor Wet Dry Vacuum Cleaner with its dimensions (length, width, height) clearly indicated.
Кафолат ва дастгирӣ
The Koblenz Contractor Wet Dry Vacuum Cleaner Model WD-6 C212 is backed by a Кафолати маҳдуди умр. This warranty covers defects in materials and workmanship under normal use. Please refer to the full warranty statement included in your product packaging for complete details, terms, and conditions.
For technical support, warranty claims, or to order replacement parts, please contact Koblenz Customer Service:
