Муқаддима
The ID-COOLING IS-55 Black is a low-profile CPU air cooler designed for efficient heat dissipation in compact systems. Featuring 5 heatpipes and a 120mm PWM fan, it offers effective cooling performance while maintaining a low 57mm total height, making it suitable for HTPCs, ITX, and Small Form Factor (SFF) builds. This manual provides essential information for proper installation, operation, and maintenance of your IS-55 CPU cooler.
Дар қуттӣ чӣ ҳаст
Лутфан тафтиш кунед, ки ҳамаи ҷузъҳо пеш аз оғози насб мавҷуд аст:
- IS-55 Heatsink with pre-attached 120mm PWM Fan
- Intel Mounting Brackets (LGA1851/1700/1200/115X)
- Қавсҳои васлкунии AMD (AM4/AM5)
- Backplate (for Intel sockets)
- Mounting Screws and Spacers
- Хамираи гармидиҳӣ
- Wrench/Tool
Image: All components included in the ID-COOLING IS-55 Black CPU Cooler package.
Мушаххасоти
| Андозаҳои маҳсулот | 4.72" дарозӣ x 0.59" паҳнӣ x 4.72" баландӣ (вентилятор) |
| Баландии умумӣ | 57мм |
| Усули хунуккунӣ | Хунуккунии ҳаво |
| Қубурҳои гармидиҳӣ | 5 |
| Андозаи тарофаҳо | 120х120х15мм |
| Суръати мухлиси | 500-2000 RPM (PWM Controlled) |
| Макс. Равиши ҳаво | 54.6 CFM |
| Сатҳи садо | 13.8-31.2 дБ(А) |
| Пайвасткунаки барқ | 4-PWM PWM |
| Ҷилдиtage | 12 вольт |
| Ватtage | 2.64 ватт |
| Вазни ашё | 15.9 унция |
Image: Fan dimensions for the IS-55 cooler.
Мутобиқати
The ID-COOLING IS-55 CPU Cooler is compatible with a wide range of Intel and AMD CPU sockets:
- Сокетҳои Intel: LGA1851, LGA1700, LGA1200, LGA1151, LGA1150, LGA1155, LGA1156
- Сокетҳои AMD: AM5, AM4
Сатҳи пасти онfile design ensures excellent RAM compatibility, even on Mini-ITX motherboards. It offers 100% clearance for I/O and up to 33mm RAM height. For low-profile I/O, the cooler can be rotated 180 degrees to support higher RAM modules.
Image: RAM and I/O compatibility diagram.
Насб ва насб
Before installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket details.
Қадамҳои умумии насб:
- Омодасозии CPU ва motherboard: Clean the CPU surface thoroughly. If replacing an old cooler, remove any existing thermal paste.
- Хамираи гармиро татбиқ кунед: Apply a small, pea-sized amount of thermal paste to the center of the CPU's Integrated Heat Spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it.
- Таҷҳизоти васлкунӣ: Follow the specific instructions below for your CPU socket type (Intel or AMD) to attach the correct backplate and mounting brackets to your motherboard.
- Сардоварро насб кунед: Carefully place the IS-55 heatsink onto the CPU, aligning the mounting holes. Secure it with the provided screws, tightening them in a diagonal pattern until snug. Do not overtighten.
- Сими фанниро пайваст кунед: Connect the 4-pin PWM fan cable from the IS-55 cooler to the CPU_FAN header on your motherboard.
Intel LGA1851/1700/1200/115X Installation:
- Install the universal Intel backplate behind the motherboard, aligning the holes with the CPU socket.
- Place the appropriate Intel mounting standoffs through the motherboard holes and into the backplate.
- Secure the Intel mounting brackets onto the standoffs using the provided nuts.
- Proceed with steps 4 and 5 from the General Installation Steps.
AMD AM4/AM5 Installation:
- Remove the stock plastic retention modules from the motherboard, but keep the original AMD backplate.
- Install the AMD mounting standoffs into the holes around the CPU socket, screwing them into the original AMD backplate.
- Secure the AMD mounting brackets onto the standoffs using the provided nuts.
- Proceed with steps 4 and 5 from the General Installation Steps.
Video: An official product video demonstrating the installation process and features of the ID-COOLING IS-55 Black CPU Cooler, including its compact size and heat dissipation capabilities.
Image: IS-55 cooler installed in a small form factor PC case.
Дастурҳои амалиётӣ
The ID-COOLING IS-55 features a PWM (Pulse Width Modulation) controlled fan. This allows your motherboard to automatically adjust the fan speed based on CPU temperature, optimizing for both cooling performance and noise levels.
- Назорати автоматӣ: For most users, the default fan control settings in your motherboard's BIOS/UEFI are sufficient. The fan will spin faster under heavy CPU load and slow down during idle periods.
- Manual Adjustment (Advanced Users): You can fine-tune fan curves in your motherboard's BIOS/UEFI settings or using third-party software (if supported by your motherboard) to achieve a preferred balance between cooling and acoustics.
Image: PWM fan control diagram.
Нигоҳдорӣ
Нигоҳубини мунтазам ба таъмини кори беҳтарин ва дарозумрии сардкунандаи CPU-и шумо мусоидат мекунад.
- Тоза кардани чанг: Periodically (e.g., every 3-6 months), use compressed air to blow dust out of the heatsink fins and fan blades. Ensure the fan is held stationary during cleaning to prevent damage to the bearings.
- Тозакунии вентилятор: If dust buildup is significant, gently wipe the fan blades with a soft, dry cloth.
- Хамираи гармидиҳӣ: While not typically required frequently, if you remove the cooler for any reason, it is recommended to clean off old thermal paste from both the CPU and cooler base and apply fresh thermal paste before reinstallation.
Image: Black coated heatsink fins and heatpipes.
Мушкилкушо
If you encounter issues with your ID-COOLING IS-55 CPU Cooler, consider the following common solutions:
- Ҳарорати баланди CPU:
- Ensure the cooler is securely mounted and making full contact with the CPU.
- Боварӣ ҳосил кунед, ки хамираи термоӣ дуруст ва баробар истифода шудааст.
- Санҷед, ки оё вентилятор чарх мезанад. Агар не, боварӣ ҳосил кунед, ки он ба сарлавҳаи CPU_FAN дуруст пайваст аст.
- Clean any dust buildup from the heatsink fins and fan.
- Check BIOS/UEFI settings to ensure fan speed control is enabled and functioning correctly.
- Садои аз ҳад зиёди мухлисон:
- Оё ягон кабел ё монеае, ки ба парҳои вентилятор бархӯрдаанд, вуҷуд дорад, тафтиш кунед.
- Clean the fan blades and heatsink for dust.
- Adjust fan curve settings in BIOS/UEFI to reduce maximum fan speed if temperatures allow.
- Мухлиси чарх намезанад:
- Ensure the 4-pin PWM cable is firmly connected to the CPU_FAN header on the motherboard.
- Check BIOS/UEFI settings to ensure the CPU_FAN header is enabled and not set to a very low RPM threshold that prevents it from spinning at idle.
- Test the fan on another fan header if available to rule out a faulty fan or motherboard header.
Кафолат ва дастгирӣ
ID-COOLING products typically come with a manufacturer's warranty. Please refer to the official ID-COOLING website or your retailer for specific warranty terms and conditions applicable to your region and purchase date.
For technical support, troubleshooting assistance, or warranty claims, please contact ID-COOLING customer service through their official webсайт ё маълумоти тамос, ки бо бастаи маҳсулоти шумо оварда шудааст.
расмӣ Webсайт: www.idcooling.com
