1. Муқаддима
This manual provides essential information for the safe installation, operation, and maintenance of your Philips LED Slim Flood Light, model PTF150-NW-G1-Y-FL-8-BZ. Please read this manual thoroughly before installation and retain it for future reference.
The Philips LED Slim Flood Light is designed for outdoor applications such as sign lighting, building facades, security lighting, and general area illumination. Its robust construction and efficient LED technology ensure reliable performance.
2. Маълумот оид ба бехатарӣ
WARNING: Risk of electric shock. Installation should be performed by a qualified electrician or trained personnel in accordance with all applicable electrical codes.
- Пеш аз насб кардан ё хидматрасонӣ қувваи барқро аз сӯзандору ё қуттии муҳофизаткунанда ҷудо кунед.
- Таъмини ҳаҷми таъминотtage is compatible with the fixture's requirements (120V AC).
- Дастгоҳро бо симҳо ё қисмҳои вайроншуда истифода набаред.
- Ҳангоми равшанӣ аз таъсири бевоситаи чашм ба манбаи рӯшноӣ худдорӣ кунед.
- The fixture's housing acts as a heat sink and may become hot during operation. Allow adequate cooling time before handling.
- Ensure all connections are secure and properly sealed, especially the IP66 liquid-tight connector for the power cord, to maintain water resistance.
- Тағйири асбобро накунед. Ҳама гуна тағйирот метавонад кафолатро бекор кунад ва хатарҳои бехатариро ба вуҷуд орад.
3. Мундариҷаи баста
Пеш аз оғози насбкунӣ тасдиқ кунед, ки ҳама ҷузъҳо мавҷуданд:
- Philips LED Slim Flood Light (1 unit)
- Integrated Yoke Mount (pre-attached)
- Power Cord (3-foot, STW 16 gauge)
- IP66 Liquid Tight Connector (pre-attached to cord exit)
Тасвири 1: Philips LED Slim Flood Light. This image shows the front view of the flood light with its integrated yoke mount and power cord connection point.
4. Мушаххасоти
| Мушаххасоти | Тафсилот |
|---|---|
| Рақами модел | PTF150-NW-G1-Y-FL-8-BZ |
| Бренд | Signify (Philips) |
| Ватtage | 150 Ватт |
| Натиҷаи Lumen | 18600 люмен |
| Ҳарорати ранг | 4000К Сафеди хунук |
| Самаранокӣ | 124 люмен дар як ватт |
| Ҷилдиtage | 120 вольт (AC) |
| Навъи васлкунӣ | Yoke Mount (Surface Mount) |
| Анҷом | Бронза |
| Материал | Die-cast aluminum housing, tempered glass lens |
| Рейтинги ҳифзи воридшавӣ (IP). | IP65 (fixture), IP66 (connector) |
| Вазни ашё | 4 фунт |
| Андозаҳо (тақрибан) | 16.93" H x 11.41" W x 2.36" D (430mm H x 289.8mm W x 59.9mm D) |
5. Танзим ва насб
The Philips LED Slim Flood Light is designed for surface mounting using its integrated yoke. Follow these steps for proper installation:
- Тайёрӣ: Ensure power is disconnected at the main circuit breaker. Gather necessary tools (drill, screwdriver, wire strippers, electrical tape, mounting hardware suitable for your surface).
- Ҷойгоҳи насб: Select a sturdy surface (wall, pole, ground) capable of supporting the fixture's weight and providing adequate clearance for light distribution.
- Тамғагузорӣ ва пармакунӣ: Use the yoke mount as a template to mark the drilling points on the mounting surface. Drill appropriate pilot holes for your chosen mounting hardware. Refer to the dimension diagram for precise measurements.
- Амнияти дастгоҳ: Attach the yoke mount securely to the prepared surface using appropriate screws or bolts (not included). Ensure the fixture is stable and cannot vibrate loose. The yoke includes a bolt to lock in the aiming angle after adjustment.
- Пайвастагии барқ:
- The fixture comes with a 3-foot watertight STW 16 gauge cord exiting the housing via an IP66 liquid-tight connector.
- Connect the fixture's power cord to your main power supply wiring. This connection must be made by a qualified electrician and comply with all local and national electrical codes.
- Ensure all wire connections are properly insulated and protected from moisture.
- Aiming Adjustment: Loosen the bolt on the yoke mount, adjust the flood light to the desired aiming angle, and then securely tighten the bolt to lock the position.
- Барқарор кардани қудрат: Пас аз ба итмом расидани насб ва ҳама пайвастшавӣ бехатар аст, қувваи барқро дар ноқилҳои барқӣ барқарор кунед.
Тасвири 2: Philips LED Slim Flood Light Dimension Diagram. This diagram provides detailed measurements for the flood light, including height, width, depth, and mounting hole spacing, crucial for accurate installation.
6. Дастурҳои истифодабарӣ
The Philips LED Slim Flood Light operates upon receiving power. There are no user-adjustable controls on the fixture itself.
- Фаъол / Хомӯш: Control the light by switching the connected power circuit on or off. This can be done via a wall switch, timer, or photocell (not included).
- Фаъолияти худкор: For automated operation, connect the flood light to an external timer, motion sensor, or photocell switch (purchased separately) according to their respective installation instructions.
7. Нигоҳдорӣ
The Philips LED Slim Flood Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.
- Тозакунӣ: Линза ва корпусро мунтазам бо матои нарм тоза кунед,amp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
- Санҷиш: Annually inspect the fixture for any signs of damage, loose connections, or wear on the power cord. Address any issues promptly.
- Иваз кардани компонент: The LED light source is integrated and not user-replaceable. If the fixture malfunctions, contact customer support.
8. Баррасии мушкилот
If your Philips LED Slim Flood Light is not functioning as expected, refer to the following common issues and solutions:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Чароғ фурӯзон намешавад. | Қувваи барқ ба дастгоҳ нест. Пайвасти ноқилҳои ноқил. Faulty circuit breaker/fuse. | Таъмини қувваи барқро тафтиш кунед. Verify all wiring connections are secure (consult a qualified electrician). Калиди барқро аз нав танзим кунед ё муҳофизаткунандаро иваз кунед. |
| Нур мепарад ё хира мешавад. | Inconsistent power supply. Ноқилҳои фуҷур. Зарари асбоб. | Таъмини қувваи устувор. Пайвастҳои ноқилҳоро тафтиш кунед. If damage is suspected, discontinue use and contact support. |
| Об дар дохили дастгоҳ. | Improperly sealed connections. Damaged housing/lens. | Immediately disconnect power. Inspect and re-seal all connections, especially the IP66 connector. If housing or lens is damaged, the IP rating may be compromised; contact support. |
Агар қадамҳои ислоҳи мушкилот ҳалли худро наёбанд, бо хадамоти дастгирии муштариён тамос гиред.
9. Кафолат ва дастгирӣ
For warranty information and technical support, please refer to the official Signify (Philips) webсайт ё шӯъбаи хидматрасонии муштариёни онҳо тамос гиред. Квитансияи хариди худро ҳамчун далели харид нигоҳ доред.
Истеҳсолкунанда: Нишон додан
Рақами модел: PTF150-NW-G1-Y-FL-8-BZ
Маълумот барои тамос: Please visit the official Signify webсайт барои навтарин маълумоти тамос ва захираҳои дастгирӣ.
