Муқаддима
Thank you for choosing the Linkind Outdoor Solar Motion Sensor Light. This product is designed to provide efficient and reliable outdoor illumination for your garden, pathway, garage, or porch. Featuring 1000LM brightness, 24 high-power LEDs, dual color temperatures (3000K Warm White & 6500K Cool White), and three intelligent operating modes, these IP67 waterproof lights offer enhanced security and ambiance. Please read this manual carefully before installation and use to ensure optimal performance and longevity.
Image: The Linkind solar light installed, casting a warm glow on a garden path at night.
Маълумот оид ба бехатарӣ
- Ensure the solar panel receives direct sunlight for at least 6-8 hours daily for optimal charging.
- Do not install the light near other strong light sources, as this may interfere with the motion sensor or automatic dusk-to-dawn operation.
- Keep the solar panel clean from dust, dirt, and debris to maintain charging efficiency.
- This product is IP67 waterproof, designed to withstand various weather conditions, but avoid submerging it in water.
- Кӯшиш накунед, ки маҳсулотро қисм-қисм кунед ё тағир диҳед, зеро ин кафолатро бекор мекунад ва метавонад боиси зарар гардад.
- Аз дастрасии кӯдакон дур нигоҳ доред.
Мундариҷаи баста
Лутфан бастаро тафтиш кунед, то боварӣ ҳосил кунед, ки ҳама ҷузъҳо мавҷуданд:
- Linkind Outdoor Solar Motion Sensor Light (x2)
- Саҳми заминӣ (x2)
- Wall Mounting Screws and Anchors (x2 sets)
- Дастури корбар (ин ҳуҷҷат)
Хусусиятҳои маҳсулот
- Равшании баланд: Equipped with 24 high-power LEDs, delivering up to 1000 lumens of bright illumination.
- Ҳарорати ранги дугона: Offers both 3000K Warm White and 6500K Cool White light options to suit different preferences and environments.
- Сенсори ҳаракат: Advanced motion detection with a range of 3-8 meters and a 120° detection angle, ensuring light activates when needed.
- Се режими корӣ: Customizable lighting modes for various scenarios (details in Operating Instructions).
- Рейтинги IP67 обногузар: Designed to withstand harsh weather conditions, including rain, snow, and extreme temperatures.
- High Efficiency Solar Panel: Monocrystalline silicon solar panel with a 22% conversion rate for fast and efficient charging.
- Насбкунии 2-дар 1: Versatile design allows for both ground insertion and wall mounting.
- Кунҷи танзимшаванда: Light head can be adjusted vertically by 90° and horizontally by 270° for precise lighting direction.
Image: Feature comparison highlighting Linkind's cool & warm white, motion sensor, 1800mAh battery, 1000 lumens, and monocrystalline silicon solar panel.
Image: The solar light demonstrating its IP67 waterproof, frostproof, and heatproof capabilities under a water splash.
Тасвир: Муфассал view of the solar light's 24 LEDs and unique optical lens, emphasizing high charging efficiency and long illumination.
Image: A person and their dog walking past the solar light, illustrating its sensitive motion detection with a 3-8m range and 120° angle.
Насб ва насб
The Linkind solar light offers two installation options: ground insertion or wall mounting.
Ҷойгиркунии замин
- Режимро интихоб кунед: Before assembly, press the power button on the back of the light to select your desired operating mode (see Operating Instructions for details).
- Дорандаро ҷамъ кунед: Attach the light unit to the top part of the ground stake.
- Connect Spikes: Connect the two spike sections of the ground stake together.
- Ба замин ворид кунед: Firmly insert the assembled light and stake into soft ground in a location that receives ampнури бевоситаи офтоб.
Монтажи девор
- Режимро интихоб кунед: Before assembly, press the power button on the back of the light to select your desired operating mode.
- Fix the Holder: Use the provided screws and anchors to securely fix the wall mounting bracket to a desired wall or fence.
- Connect the Two Parts: Attach the light unit to the wall mounting bracket.
- Танзими кунҷ: Adjust the angle of the solar panel and light head to ensure optimal sunlight exposure and lighting direction.
Image: Visual instructions for both ground insertion and wall mounting methods.
Дастурҳои амалиётӣ
The Linkind solar light features a single button to cycle through its three operating modes and to switch between warm and cool white light.
Тағир додани ҳарорати ранг
To switch between 3000K Warm White and 6500K Cool White, тугмаи барқро барои 3 сония дароз пахш кунед.
Cycling Through Modes (Short Press)
- Ҳолати 1: Keeps dim light all night. The motion sensor does not react in this mode.
- Ҳолати 2: Dim light when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
- Ҳолати 3: Light is off when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
Image: Visual representation of the three lighting modes: always dim, dim with motion-activated bright, and off with motion-activated bright.
Нигоҳдорӣ
- Панели офтобии тоза: Панели офтобиро мунтазам бо матои нарм тоза кунед,amp cloth to remove dust, dirt, or snow. A clean panel ensures maximum charging efficiency.
- Ҷойгиршавии санҷед: Periodically check that the light's location still receives adequate direct sunlight, especially after seasonal changes or new foliage growth.
- Тафтиши зарар: Occasionally inspect the light for any physical damage or loose connections.
- Батарея: The built-in Lithium-ion battery is designed for long life. Do not attempt to replace it yourself.
Мушкилкушо
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Шабона чароғ намегирад. | Insufficient sunlight exposure during the day. Панели офтобӣ ифлос аст. Light is in "OFF" mode (Mode 3 without motion). Батарея тамом шудааст. | Relocate the light to an area with more direct sunlight. Панели офтобиро тоза кунед. Press the power button to cycle to Mode 1 or Mode 2. Allow 1-2 sunny days for the battery to fully charge. |
| Light flickers or has low brightness. | Partial charge of battery. Solar panel is partially obstructed or dirty. | Ensure full sunlight exposure for several hours. Панели офтобиро тоза кунед ва ҳама монеаҳоро бартараф кунед. |
| Motion sensor not working. | Light is in Mode 1 (always dim). Сенсор баста шудааст. External light interference. | Switch to Mode 2 or Mode 3. Clear any debris or objects blocking the sensor. Relocate the light away from other strong light sources. |
| Ранги равшан тағйир намеёбад. | Пахшкунии тугмаи нодуруст. | Ensure you are long-pressing the power button for 3 seconds to switch between warm and cool white. |
Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Бренд | Linkind |
| Рақами модел | LL1801131 |
| Манбаи нур | 24 LED |
| Ҷараёни рӯшноӣ | 1000 люмен |
| Ҳарорати ранг | 3000К Сафеди гарм ва 6500К Сафеди хунук |
| Диапазони муайянкунии сенсори ҳаракат | 3—8 метр |
| Кунҷи муайянкунии сенсори ҳаракат | 120° |
| Рейтинги IP | IP67 |
| Манбаи нерӯ | Бо нерӯи офтобӣ |
| Навъи батарея | 1 Литий-ион (дохил) |
| Самаранокии панели офтобӣ | 22% Conversion Rate (Monocrystalline Silicon) |
| Материал | Акрилонитрил бутадиен стирен (ABS) |
| Андозаҳои маҳсулот (L x W x H) | 15.4 x 4.8 x 10.1 см (6.06 x 1.89 x 3.98 инч) |
| Вазни ашё | 600 г (1.32 фунт) |
Image: Detailed diagram illustrating the dimensions, adjustable angle, motion sensor, and PET surface layer of the solar light.
Кафолат ва дастгирӣ
For warranty information and customer support, please refer to the product packaging or contact Linkind customer service directly through their official website or the retailer where the product was purchased. Please have your model number (LL1801131) and purchase details ready when contacting support.
