Дастури истифодабарии мошини ивазкунандаи чархҳои KATOOL KT-T810

1. Муқаддима

This manual provides comprehensive instructions for the safe and efficient operation, assembly, and maintenance of the KATOOL KT-T810 Tire Changer Machine. Designed for automotive repair and garage environments, this machine facilitates tire changing and maintenance with features such as a 2.0HP motor, bead blaster, and 24-inch clamping capability. Adherence to these instructions is crucial for optimal performance and user safety.

2. Маълумот оид ба бехатарӣ

Always prioritize safety when operating the KATOOL KT-T810 Tire Changer Machine. Failure to follow safety guidelines can result in serious injury or equipment damage.

• Дастурро хонед: Thoroughly read and understand all instructions and warnings in this manual before operating the machine.
• Таҷҳизоти муҳофизати шахсӣ (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots.
• Минтақаи корӣ: Ensure the work area is clean, well-lit, and free from obstructions. Keep bystanders, especially children, away from the machine during operation.
• Бехатарии барқ: Connect the machine to a properly grounded electrical outlet. Do not operate with damaged cords or plugs. Ensure the power supply matches the machine's requirements (120V/1ph/2.0HP for North America).
• Pneumatic Safety: Ensure all air connections are secure and free of leaks. Do not exceed the recommended air pressure. Always bleed air pressure before performing maintenance or adjustments.
• Устувории мошин: Ensure the machine is placed on a stable, level surface and properly secured to prevent tipping during operation.
• Таваррум: Use extreme caution when inflating tires. Over-inflation can cause tires to explode, leading to severe injury. Always use an inflation cage or other restraint device when inflating.
• Нигоҳдорӣ: Disconnect power and air supply before performing any maintenance, cleaning, or adjustments.

3. Дар қуттӣ чӣ мавҷуд аст

Ҳангоми кушодан, тафтиш кунед, ки ҳама ҷузъҳо мавҷуданд:

• KATOOL KT-T810 Tire Changer Machine (main unit)
• Mounting Post and Arm Assembly
• Bead Breaker Shovel
• Air Filter/Regulator Unit
• Inflation Gauge with Hose
• Plastic Rim Protectors / Jaw Covers
• Lubricant Brush
• Дастури корбар (ин ҳуҷҷат)

4. Насбкунӣ ва васлкунӣ

Follow these steps to assemble your KATOOL KT-T810 Tire Changer Machine:

1. Кушодани: Ҳама ҷузъҳоро аз бастабандӣ бодиққат хориҷ кунед. Ҳама гуна зарари интиқолро тафтиш кунед.
2. Ҷойгиркунӣ: Place the main unit on a solid, level floor. Ensure adequate space around the machine for operation and maintenance.
3. Mounting Post Installation: Attach the main vertical post to the machine base using the provided hardware. Ensure all bolts are securely tightened.
4. Пайвастҳои пневматикӣ: Connect the air supply lines to the machine. Install the air filter/regulator unit according to the diagram. Ensure all pneumatic fittings are tight to prevent air leaks.
5. Пайвастагии барқ: Connect the power cord to a grounded 120V/1ph electrical outlet.
6. Initial Air Pressure Check: Connect an air compressor to the machine's air inlet. Set the regulator to the recommended operating pressure (typically 8-10 bar or 116-145 psi). Check all pneumatic connections for leaks using soapy water. Tighten any leaking fittings.

5. Дастурҳои истифодабарӣ

This section details the procedures for changing tires using the KT-T810 machine.

5.1. Demounting a Tire

1. Шинаро хомӯш кунед: Барои пурра холӣ кардани чарх, ядрои клапанро хориҷ кунед.
2. Чархи мавқеъ: Place the wheel on the turntable. Use the clamping jaws to secure the wheel. Ensure the correct clamping method (outside or inside) is selected based on the rim type.
3. Шикастани муҳраҳо: Position the bead breaker shovel against the tire sidewall, close to the rim edge. Depress the bead breaker pedal to activate the shovel and break the bead from the rim. Repeat for both sides of the tire.
4. Молидани: Apply tire lubricant to both tire beads and the rim edges.
5. Мавқеи сарвари васлкунӣ: Swing the mounting arm into position. Adjust the mounting head so it is just above the rim edge, ensuring the plastic cover protects the rim. Lock the mounting arm in place.
6. Мунчаи болоиро кушоед: Use a tire lever to pry the top bead over the mounting head. Rotate the turntable using the pedal to fully demount the top bead.
7. Муҳофизаи поёниро кушоед: Slide the tire lever under the bottom bead. Rotate the turntable to fully demount the bottom bead from the rim.
8. Шинаро хориҷ кунед: Lift the tire off the turntable.

5.2. Mounting a Tire

1. Молидани: Apply tire lubricant to both tire beads and the rim edges.
2. Чархи мавқеъ: Place the rim on the turntable and secure it with the clampдаҳонҳо.
3. Position Tire: Place the bottom bead of the tire over the mounting head.
4. Банди поёни кӯҳӣ: Rotate the turntable using the pedal to guide the bottom bead onto the rim.
5. Bead боло: Push down on the tire sidewall while rotating the turntable to guide the top bead onto the rim.
6. Bead Blaster (if needed): For stubborn beads, position the tire and rim correctly. Activate the bead blaster using its dedicated pedal to rapidly inject air, seating the tire beads.
7. Шинонидани чарх: Connect the inflation gauge hose to the tire valve stem. Inflate the tire to the manufacturer's recommended pressure. Always use an inflation cage or restraint device. Monitor the pressure gauge carefully.
8. Чархро хориҷ кунед: cl-ро озод кунедamping jaws and remove the inflated wheel from the turntable.

6. Нигоҳдорӣ

Regular maintenance ensures the longevity and safe operation of your tire changer.

• Тозакунии ҳаррӯза: Clean the turntable, clamping jaws, and mounting head after each use to remove tire lubricant and debris.
• Check Air Connections: Periodically inspect all air hoses and fittings for wear, damage, or leaks. Tighten or replace as necessary.
• Молидани: Lubricate moving parts, such as the mounting arm pivot points and bead breaker cylinder, according to the manufacturer's recommendations.
• Қисмҳои фарсудашударо тафтиш кунед: Regularly check the plastic rim protectors, jaw covers, and mounting head inserts for wear. Replace them if they are damaged to prevent scratching rims.
• Филтри ҳаво: Drain any accumulated water from the air filter bowl and replace the filter element as needed to ensure clean air supply to the pneumatic system.

7. Баррасии мушкилот

This section addresses common issues you might encounter with the KT-T810 Tire Changer Machine.

8. Мушаххасоти

Technical specifications for the KATOOL KT-T810 Tire Changer Machine:

9. Кафолат ва дастгирӣ

The KATOOL KT-T810 Tire Changer Machine includes a 12-month full parts warranty аз рӯзи харид. Ин кафолат нуқсонҳои мавод ва коркардро ҳангоми истифодаи муқаррарӣ фаро мегирад.

For technical assistance, warranty claims, or to order replacement parts, please contact KATOOL customer support or Rainier Engineering, Ltd. (the seller). Please have your model number (KT-T810) and purchase date available when contacting support.

Маълумот барои тамос: Refer to your purchase documentation or the KATOOL official webсайт барои тафсилоти охирини тамос барои дастгирӣ.