Дастури корбарии педали эффектҳои гитара барои модулятсияи андозаҳои Warped SONICAKE

1. Муқаддима

The SONICAKE Warped Dimension is a versatile modulation guitar effects pedal designed to offer a range of high-quality modulation effects. This pedal combines four classic modulation modes: Chorus, Flanger, Phaser, and Tremolo, providing diverse tonal options for any musical style. It features a dedicated Tap Tempo function for real-time rate control and a specially designed buffer bypass circuit to maintain signal integrity.

Figure 1: SONICAKE Warped Dimension Modulation Guitar Effects Pedal

2. Хусусиятҳои асосӣ

• 4-in-1 Modulation: Integrates Chorus, Flanger, Phaser, and Tremolo effects into a single pedal.
• Classic Tones: Reproduces legendary modulation effects.
• Темпро ламс кунед: Independent footswitch for real-time rate control.
• Гузаштан буферӣ: Maintains pristine sound quality when the effect is disengaged.
• Сохтмони устувор: Housed in an aluminum-alloy casing for lightweight durability.

3. Идоракунӣ ва функсияҳо

Расми 2: Зиёдview of Pedal Controls

1. Тугмаи интихоби режим: Rotates to select one of the four modulation effects: Chorus, Flanger, Phaser, or Tremolo.
2. Вуруди DC 9V: Connects to a 9V DC center-negative power supply (not included).
3. Вуруди Ҷек: 1/4-inch audio input for your guitar or other instrument.
4. Тугмаи сатҳ: Ҳаҷми умумии баромади эффектро танзим мекунад.
5. Тугмаи оҳанг: Controls the tone or brightness of the modulated signal.
6. Тугмаи чуқурӣ: Adjusts the intensity or depth of the selected modulation effect.
7. Тугмаи нархгузорӣ: Controls the speed of the selected modulation effect. This knob is overridden by the Tap Tempo function when active.
8. Натиҷаи Jack: 1/4-inch audio output to your amplifier or next pedal in the chain.
9. Фурӯшанда/хомӯш кардани тугмаи пой: Engages or disengages the effect. The LED indicates the effect status (on/off).
10. Пойафзори TAP: Used for Tap Tempo. Tap this footswitch two or more times to set the rate of the modulation effect. The LED will blink to indicate the set tempo.

4. Танзимот

To set up your SONICAKE Warped Dimension pedal, follow these steps:

1. Пайвасти барқ: Connect a standard 9V DC center-negative power supply (5.5x2.1mm connector) to the DC 9V input jack (2). Ensure the power supply meets the specified voltage ва талаботи қутбӣ.
2. Пайвастшавӣ ба асбоб: Connect your guitar or other instrument to the Input Jack (3) using a standard 1/4-inch instrument cable.
3. Пайвасти баромад: Connect the Output Jack (8) to your ampбардоранда ё педали навбатӣ дар занҷири сигнали худро бо истифода аз сими асбоби стандартии 1/4 дюймӣ пахш кунед.
4. Фаъол: Once all connections are secure, apply power to the pedal. The ON/OFF LED (9) will illuminate when the pedal is active.

Figure 3: DC 9V Center Negative Power Connection

5. Реҷаҳои корӣ

The pedal offers four distinct modulation modes, selectable via the Mode Selector Knob (1):

• Хор: Produces a rich, shimmering effect by slightly detuning and delaying the original signal.
• Флангер: Creates a sweeping, jet-like sound by mixing a delayed, phase-shifted signal with the original.
• Фаза: Generates a swirling, psychedelic effect by creating phase shifts in the signal.
• Тремоло: Modulates the volume of the signal, creating a pulsating effect.

Figure 4: Modulation Mode Selection

Функсияи Tempo -ро пахш кунед

The Tap Tempo function allows you to set the modulation rate in real-time:

1. Engage the desired modulation effect using the ON/OFF Footswitch (9).
2. Tap the TAP Footswitch (10) two or more times in rhythm with your desired tempo. The LED on the TAP footswitch will blink to indicate the set rate.
3. The Rate Knob (7) will be overridden by the Tap Tempo setting until the pedal is powered off or the rate is manually adjusted again.

Figure 5: Tap Tempo Footswitch

6. Нигоҳдорӣ

To ensure the longevity and optimal performance of your pedal:

• Педали худро тоза ва аз чанг тоза нигоҳ доред. Барои тоза кардан аз матои нарм ва хушк истифода баред.
• Нагузоред, ки педальро ба ҳарорати аз ҳад зиёд, намӣ ё нури бевоситаи офтоб дучор кунед.
• Do not attempt to disassemble or repair the pedal yourself, as this may void the warranty.
• Always use the correct power supply (9V DC center-negative) to prevent damage.

7. Баррасии мушкилот

• Овоз нест: Ҳама пайвастҳои кабелро тафтиш кунед (асбоб, amplifier, power). Ensure the power supply is correctly connected and functioning. Verify the pedal is engaged (LED on).
• Садои суст ё таҳрифшуда: Асбобро тафтиш кунед ва amplifier volume levels. Ensure the Level knob on the pedal is not set too low or too high. Test with different cables.
• Таъсир ҷолиб нест: Confirm the power supply is connected and providing power. Press the ON/OFF footswitch firmly.
• Modulation Rate Issues: If using Tap Tempo, ensure you have tapped the footswitch at least twice. If not using Tap Tempo, adjust the Rate knob (7).

8. Мушаххасоти

• Рақами модел: QDS
• Вазни ашё: 12.7 унсия (360 Грам)
• Андозаҳои маҳсулот: 4.88 x 3.54 x 2.16 инч
• Навъи пайвасткунанда: 5.5×2.1mm center negative power connector
• Интерфейси сахтафзор: 1/4-дюймаи аудио
• Формати сигнал: Аналогӣ
• Манбаи нерӯ: Электри симдор
• Ҷилдиtage: 9 вольт

9. Видеои маҳсулот

Watch these official product videos for demonstrations and further information:

10. Кафолат ва дастгирӣ

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official SONICAKE webсайт. Барои ҳама даъвоҳои кафолат далели хариди худро нигоҳ доред.