Intelamp Solar Outdoor Flood Lights (Model 12b) - Instruction Manual

1. Муқаддима

This manual provides detailed instructions for the installation, operation, and maintenance of your Intelamp Solar Outdoor Flood Lights, Model 12b. These lights are designed to provide efficient and reliable outdoor illumination using solar power and motion sensing technology. Please read this manual thoroughly before use to ensure proper function and longevity of your product.

2. Маҳсулот ба охир расидview

Intelamp Solar Outdoor Flood Lights feature a 3-head design with a separate solar panel for optimal sun exposure. Equipped with dual motion sensors, these lights offer a wide detection range and multiple operating modes controlled by a remote. They are built with IP65 waterproof rating for durability in various outdoor conditions.

Хусусиятҳои асосӣ:

• Панели офтобии баландсифат: A large 40 square inch (9.4 x 4.3 inches) solar panel ensures faster charging.
• Батареяи иқтидори калон: A 6000mAh lithium-ion battery provides extended illumination, up to three nights in motion-sensing mode on a full charge.
• Равшании дурахшон: Delivers up to 1200 lumens of bright white light (6500 Kelvin).
• Сенсорҳои ҳаракати дугона: Two sensors provide a 180-degree detection range, covering a broader area and minimizing blind spots.
• Амали идоракунии дурдаст: Adjust settings such as motion-detected high-brightness duration (20, 30, or 40 seconds) and various lighting modes.
• Пойдор ва обногузар: IP65 rated for resistance against dust and water, suitable for outdoor use.
• Насби чандир: Separate solar panel with a 9-foot cable allows for flexible placement of both the light and the panel.

Тасвири 2.1: Ба охир расидview of the Intelamp Solar Outdoor Flood Lights, showing two units, their separate solar panels, and remote controls.

Тасвири 2.2: Муфассал view of the solar panel and light unit, illustrating dimensions (9.4 inches for solar panel, 12 inches for light unit), the 9-foot cable, and the two motion sensors.

Image 2.3: Comparison of Intelamp solar lights with standard lights, highlighting Intelamp's larger 40 sq inch solar panel, 6000mAh battery, and 1200 lumen brightness compared to standard 21 sq inch panel, 2000mAh battery, and 600 lumen brightness.

Image 2.4: Illustration demonstrating the superior 180-degree detection angle and 25ft*2 operation range of the dual sensor design, in contrast to a single sensor's 90-degree detection and 25ft range.

3. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ҷузъҳо дар баста мавҷуданд:

• Intelamp Solar Flood Light Unit(s)
• Separate Solar Panel(s) with 9FT Cable
• Идоракунии дурдаст(ҳо)
• Виддаҳои васлкунӣ
• Пайвастҳои кабелӣ
• Дастури таълимӣ (ин ҳуҷҷат)

4. Мушаххасоти

5. Танзим ва насб

Proper installation is crucial for the optimal performance of your solar lights. Follow these steps carefully:

5.1 Ҷойгоҳи насбро интихоб кунед

• For the Solar Panel: Select a location that receives direct sunlight for at least 6-8 hours daily. Avoid areas shaded by trees, buildings, or eaves, as this will significantly reduce charging efficiency. The 9-foot cable allows flexibility in placing the solar panel away from the light unit to maximize sun exposure.
• For the Light Unit: Choose a location where the light can effectively illuminate the desired area and where the motion sensors have an unobstructed view of the detection zone. Common locations include walls, fences, garage door frames, or posts.

Image 5.1: The solar panel should be installed in a location with sufficient direct sunlight to ensure proper battery charging.

Image 5.2: Proper installation ensures the solar panel is not covered by eaves or other obstructions, allowing full sun exposure.

5.2 Mounting the Light and Solar Panel

The light unit and solar panel can be mounted using the included screws or cable ties.

• Wall Installation (Screws):
  1. Mark the desired mounting points for both the light unit and the solar panel. The light unit has hole spacing of 2.1 inches (top) and 3.5 inches (bottom).
  2. Агар лозим бошад, сӯрохиҳои пилотӣ парма кунед.
  3. Rotate the solar panels on the light unit from side to side and the central lamp vertically up and down to provide space for screw installation.
  4. Secure the light unit and solar panel brackets to the surface using the provided screws.
• Cable Tie Installation (for poles, trees, fences):
  1. Insert the cable ties through the mounting holes on the light unit and solar panel brackets.
  2. Wrap the cable ties around the pole, tree trunk, or fence, and secure them tightly.

Image 5.3: Instructions for wall mounting using screws and alternative installation using cable ties for poles or trees.

5.3 Пуркунии ибтидоӣ

Before first use, allow the solar panel to charge in direct sunlight for at least 6-8 hours to ensure the battery is sufficiently charged.

6. Дастурҳои истифодабарӣ

Your Intelamp Solar Flood Lights are controlled by the included remote. Familiarize yourself with the remote's functions to select the desired operating mode.

6.1 Функсияҳои идоракунии дурдаст

• ФУРУШ/ХОМУШ: Чароғро фурӯзон ё хомӯш мекунад.
• 20s/30s/40s: Sets the duration for high brightness in motion-sensing modes.
• Dim Sensor Mode: Activates a mode where the light stays dim and brightens to full intensity upon motion detection.
• 2С/4С/6З: Sets a timed duration for continuous lighting in 'Dim Lighting Mode'.
• Dim Lighting Mode: Activates a mode where the light stays on continuously at a dim level.
• Танзими равшанӣ: Buttons with sun icons (e.g., 60%, 80%, 100%) adjust the brightness level.

Image 6.1: The remote control allows adjustment of brightness levels (e.g., 60%, 80%, 100%) for the motion sensor mode.

6.2 Усулҳои равшанӣ

Intelamp solar lights offer several operating modes to suit your needs:

• Mode 1: Dim to Strong Motion Sensor Mode
  The light remains at a low brightness (e.g., 20%) constantly. When motion is detected, it brightens to full intensity (100%) for the set duration (20s/30s/40s), then returns to dim.
  

  Image 6.2: In Dim to Strong Motion Sensor Mode, the light maintains 20% brightness, increases to 100% upon motion detection, and then returns to 20% after 20/30/40 seconds.
• Mode 2: Off to Strong Motion Sensor Mode
  The light remains off. When motion is detected, it turns on at full intensity (100%) for the set duration (20s/30s/40s), then turns off.
  

  Image 6.3: In Off to Strong Motion Sensor Mode, the light remains off, activates to 100% brightness upon motion detection, and then turns off after 20/30/40 seconds.

• Mode 3: Long Light Mode (Motion Sensor Disabled)
  The light turns on at night and stays on continuously at a set brightness (e.g., 80% or 20%) for a timed duration (2H/4H/6H). After the timing ends, it can either dim or turn off until the next day.
  

  Image 6.4: Long Light Mode (Motion Sensor Disabled) showing the light staying on at 80% brightness and then dimming to 20% after the set timing, remaining dim until dawn.

  

  Image 6.5: Long Light Mode (Motion Sensor Disabled) showing the light staying on at 80% brightness and then turning completely off after the set timing, remaining off until the next dark period.

7. Нигоҳдорӣ

Regular maintenance ensures the longevity and optimal performance of your solar lights.

• Тоза кардани панели офтобӣ: Ба давра ба давра панели офтобиро бо нарм тоза кунед, гamp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and charging efficiency.
• Пайвастҳоро тафтиш кунед: Ensure all cable connections between the solar panel and the light unit are secure and free from damage.
• Монеаҳои равшан: Regularly check that no new obstructions (e.g., growing branches, new structures) are blocking sunlight from reaching the solar panel or interfering with the motion sensors.
• Нигоҳубини батарея: The integrated lithium-ion battery is designed for long life. Avoid prolonged storage of the light in a completely discharged state. If storing for an extended period, ensure the battery is fully charged first.

8. Баррасии мушкилот

If you encounter issues with your Intelamp Solar Flood Lights, refer to the following troubleshooting guide:

9. Дастгирии муштариён

For further assistance, technical support, or inquiries regarding your Intelamp Solar Outdoor Flood Lights, please contact Intelamp customer service through the retailer's platform or the official Intelamp webсайт.