1. Муқаддима
Ташаккур ба шумо барои харидasing the Shanrya Digital Mirror Alarm Clock. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read these instructions carefully before use and retain them for future reference.
Расми 1: Пеш view of the Shanrya Digital Mirror Alarm Clock displaying 4:30 in red LED digits.
2. Танзимот
2.1 Мундариҷаи баста
- Shanrya Digital Mirror Alarm Clock
- Сими барқи USB
- Дастури корбар (ин ҳуҷҷат)
Figure 2: The alarm clock shown with its USB power cable, ready for connection.
2.2 Пайвастшавии барқ
- Connect the small end of the provided USB power cable to the DC 5V input port on the back of the alarm clock.
- Connect the standard USB end of the cable to a USB power adapter (not included) or a powered USB port.
- The display will light up, indicating the clock is powered on.
Шарҳ: This clock requires continuous power via USB. It does not operate on batteries for primary function, but may have a small internal battery for time memory during power outages (not user-replaceable).
3. Дастурҳои истифодабарӣ
3.1 Функсияҳои тугмаҳо
The clock features several buttons, typically located on the top or side. Refer to Figure 3 for button identification.
Расми 3: Муфассал view of the clock's control buttons and examples of different display brightness levels.
- Тугмаи MODE: Used to switch between time display, alarm setting, and other modes.
- Тугмаҳои боло/поён: Used to adjust values (time, alarm) or brightness levels.
- Тугмаи SNOOZE: Ҳангоми садо додани ҳушдор функсияи такрориро фаъол мекунад.
3.2 Танзими вақт
- -ро пахш кунед РЕЖИМ тугмаро то он даме, ки намоиши вақт дурахшанда шавад.
- -ро истифода баред UP ва ПОЁН тугмаҳо барои танзими соат.
- пахш кунед РЕЖИМ again to switch to minute adjustment.
- -ро истифода баред UP ва ПОЁН тугмаҳо барои танзими дақиқаҳо.
- пахш кунед РЕЖИМ барои тасдиқ ва баромадан аз ҳолати танзимкунии вақт.
3.3 Танзими ҳушдор
- -ро пахш кунед РЕЖИМ button repeatedly until the alarm icon (e.g., a bell) appears and the alarm time flashes.
- -ро истифода баред UP ва ПОЁН тугмаҳо барои таъин кардани соати зангдори дилхоҳ.
- пахш кунед РЕЖИМ again to switch to minute adjustment.
- -ро истифода баред UP ва ПОЁН тугмаҳо барои таъин кардани дақиқаҳои дилхоҳи ҳушдор.
- пахш кунед РЕЖИМ to confirm and activate the alarm. The alarm icon will remain displayed.
- To deactivate the alarm, repeat the steps and press РЕЖИМ until the alarm icon disappears.
3.4 Функсияи таъхир
Вақте ки ҳушдор садо медиҳад, тугмаи СНООЗ button (usually located on top of the clock) to temporarily silence the alarm. The alarm will sound again after a preset interval (e.g., 5-10 minutes). To turn off the alarm completely, press any other button or let it ring for its full duration.
3.5 Танзими равшанӣ
The clock offers multiple brightness levels for its LED display, including manual adjustment, automatic adjustment, and a night mode. This allows for optimal visibility in various lighting conditions.
- Танзими дастӣ: In time display mode, press the UP or ПОЁН buttons to cycle through different brightness levels (e.g., Dark, Mid Gear, Bright).
- Танзими худкор: Some models may feature an ambient light sensor that automatically adjusts display brightness based on room lighting. Refer to Figure 3 for visual representation of brightness levels.
- Реҷаи шабона: A specific setting that dims the display significantly during predefined night hours to prevent disturbance. Consult the specific button sequence for your model to activate/deactivate night mode.
4. Нигоҳдорӣ
4.1 Тозакунӣ
To clean the clock, gently wipe the surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the mirror finish and electronic components.
4.2 Нигоҳдорӣ
If storing the clock for an extended period, disconnect it from the power source and store it in a cool, dry place away from direct sunlight and extreme temperatures.
5. Баррасии мушкилот
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Дисплей холӣ аст ё фурӯзон нест. | Пайвасти суст ё барқ надорад. | Ensure the USB cable is securely connected to both the clock and a powered USB port/adapter. Try a different USB port or adapter. |
| Огоҳӣ садо намедиҳад. | Alarm not set or deactivated. Volume too low (if applicable). | Verify the alarm is set and the alarm icon is displayed. Check if there's a volume setting (though most digital clocks have fixed alarm volume). |
| Вақт нодуруст аст. | Вақт дуруст таъин нашудааст ё қатъи барқ. | Reset the time according to section 3.2. If power was interrupted, the clock may need to be reset. |
| Дисплей хеле равшан ё хеле хира аст. | Танзими равшанӣ ба танзим ниёз дорад. | Adjust the brightness manually using the UP/DOWN buttons as described in section 3.5. |
6. Мушаххасоти
- Рақами модел: Shanrya1am475rqfe-12
- ASIN: B0BVC2VWF3
- Бренд: Шанря
- Навъи намоиш: LED рақамӣ (сурх)
- Вижагиҳо: Alarm, Snooze, Dimmable Display (Manual, Auto, Night Mode)
- Манбаи нерӯ: DC 5V via USB cable
- Андозаҳо: Approximately 15.8 cm (6.2 in) x 8.7 cm (3.4 in) (Width x Height)
- Аввалин санаи дастрас: 25 марти соли 2023
Figure 4: Diagram illustrating the approximate dimensions of the alarm clock.
7. Кафолат ва дастгирӣ
Ин маҳсулот бо кафолати стандартии истеҳсолкунанда фаро гирифта шудааст. Барои шартҳо ва қоидаҳои мушаххаси кафолат, лутфан ба ҳуҷҷатҳои пешниҳодшуда ҳангоми харид муроҷиат кунед ё бо фурӯшандаи худ тамос гиред.
For technical support or inquiries, please contact the seller or manufacturer through the platform where the product was purchased. Please have your model number (Shanrya1am475rqfe-12) and ASIN (B0BVC2VWF3) ready when contacting support.
