Дастури истифодабарии мопеди калонсолони X-PRO 50cc MC-N13

1. Муқаддима

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your X-PRO 50cc Adult Moped MC-N13. Please read this manual thoroughly before operating the moped to ensure proper usage and to prevent injury or damage. Keep this manual for future reference.

Тасвири 1.1: Аз чапи пеш view of the X-PRO 50cc Adult Moped MC-N13 in orange.

2. Маълумот оид ба бехатарӣ

Operating a moped requires adherence to safety guidelines. Always wear appropriate safety gear, including a helmet, eye protection, and protective clothing. Familiarize yourself with local traffic laws and regulations before riding.

• Manufacturer Statement of Origin (MSO) and Bill of Sale: These documents are crucial for registration and will be sent separately. Do not attempt to register or title the moped before receiving these documents and confirming the product is in satisfactory condition.
• Санҷиши пеш аз сафар: Before each ride, check tire pressure, brake function, fluid levels (engine oil, fuel), and ensure all lights are operational.
• Passenger Safety: The moped is designed for rider and passenger comfort. Ensure any passenger is seated securely and aware of safety protocols.
• Сӯзишворӣ ва нафт: Use only recommended fuel and engine oil types. Refer to the maintenance section for details.
• Маҷлис: Some assembly is required. Follow the instructions carefully. If unsure, seek professional assistance.

3. Дастурамал оид ба васлкунӣ

The X-PRO 50cc Adult Moped MC-N13 requires some assembly upon delivery. This section outlines the steps for proper setup. A visual guide is also provided below.

3.1 Кушодани қуттӣ ва омодагии ибтидоӣ

Carefully remove the moped from its shipping crate. The moped is secured within a steel frame. Remove all packaging materials and secure the moped on a stable surface or its center stand.

Image 3.1: The X-PRO 50cc Adult Moped MC-N13 as received in its shipping crate.

3.2 Маҷмаи чархҳои пеш

1. Attach the speedometer drive to the front wheel.
2. Align the front wheel with the fork. Ensure the brake rotor slides into the caliper.
3. Insert the axle bolt through the fork, wheel, and caliper.
4. Secure the axle bolt with the nut and tighten.
5. Connect the speedometer cable to the speedometer drive.

3.3 Маҷмаи дастони дастӣ

1. Remove the protective packaging from the handlebars.
2. Position the handlebars into the steering column.
3. Secure the handlebars using the provided bolts and tighten them firmly.
4. Connect any loose electrical connectors for the controls.

3.4 Center Stand Assembly

1. Locate the center stand components: stand, pivot pin, and spring.
2. Align the center stand with the mounting points on the moped frame.
3. Insert the pivot pin through the frame and stand.
4. Attach the spring to secure the stand in both the up and down positions.

3.5 Front Fender Installation

1. Position the front fender over the front wheel.
2. Align the mounting holes on the fender with the corresponding points on the moped.
3. Secure the fender using the provided screws.

3.6 Пайвастшавӣ ба батарея

1. Locate the battery compartment, typically under the floor mat.
2. Сарпӯши батареяро хориҷ кунед.
3. Connect the positive (+) terminal (red cable) and negative (-) terminal (black cable) to the battery. Ensure connections are secure.
4. Replace the battery cover and floor mat.

3.7 Rear Rack and Trunk Assembly

1. Attach the rear rack to the designated mounting points at the rear of the moped.
2. Secure the rack with the provided bolts and brackets.
3. Mount the storage trunk onto the rear rack, aligning the holes and securing it with the provided hardware.

3.8 Насби оина

1. Unpack the mirrors.
2. Screw the mirrors into the designated mounts on the handlebars.
3. Adjust the mirrors for optimal rear visibility and tighten them securely.

3.9 Дастури видеоии васлкунӣ

For a detailed visual guide on the assembly process, please refer to the video below:

4. Дастурҳои истифодабарӣ

Before operating, ensure all assembly steps are complete and all safety checks have been performed.

1. Сӯзишворӣ: Fill the fuel tank with mid-grade or premium gasoline.
2. Ба кор андохтани муҳаррик:
   • Turn the key to the 'ON' position.
   • Ensure the fuel switch is open.
   • Pull the brake lever and press the electric start button while applying slight throttle. If using the kick start, apply slight throttle and firmly press the kick start lever.
3. Савор: Gradually apply throttle to accelerate. Use both front and rear brakes for controlled stopping.
4. Қатъ кардан: Release the throttle, apply brakes, and turn the key to the 'OFF' position.

5. Нигоҳдорӣ

Regular maintenance is essential for the longevity and safe operation of your moped.

• Иваз кардани равғани мотор: Change the engine oil with 10W40 4T motorcycle oil. Drain the old oil, replace the filter and spring, and add approximately 700ml of new oil. Check the oil level using the dipstick.
• Фишори чарх: Maintain tire pressure at 40 PSI for optimal performance and safety.
• Шамъ: Consider replacing the factory spark plug with a quality alternative like NGK for improved performance.
• Bolt Tightening: Periodically check and tighten all important bolts, especially after initial rides. Applying blue threadlocker to critical bolts is recommended.
• Табақҳои тормоз: Allow for a break-in period for brake pads to seat properly.

6. Баррасии мушкилот

Ин бахш мушкилоти умумиеро, ки шумо метавонед дучор ояд, баррасӣ мекунад.

7. Мушаххасоти

Эзоҳ: Мушаххасот бояд бидуни огоҳии пешакӣ тағир дода шавад.

8. Кафолат ва дастгирӣ

For warranty information, technical support, or to purchase replacement parts, please contact X-PRO customer service. Refer to the documentation included with your purchase for specific contact details and warranty terms.

You can also visit the official X-PRO Store for additional resources: X-PRO Store