1. Маҳсулот ба охир расидview
The VIMIN 5-Port Gigabit PoE Switch is an unmanaged Ethernet switch designed for reliable high-speed data transmission and power delivery over network cables. It features four Power over Ethernet (PoE+) RJ45 ports and one Gigabit uplink port, making it suitable for connecting various network devices such as NVRs, IP cameras, access points, and more. Its robust metal housing allows for versatile installation options, including desktop placement or wall-mounting.
Image: The VIMIN 5-Port Gigabit PoE Switch, showcasing its compact design and front panel with ports and indicators.
Хусусиятҳои асосӣ инҳоянд:
- 4x Gigabit PoE+ Ports: Delivers up to 30W per port with a total power budget of 72W, supporting IEEE 802.3af/at standards.
- 1x Gigabit Uplink Port: For high-speed connection to your main network or NVR.
- One-Key VLAN Mode: Enhances network security and bandwidth by isolating PoE ports while maintaining uplink communication.
- Plug & Play: Requires no complex configuration for immediate use.
- Муҳофизати устувор: Features 4KV lightning protection for enhanced device safety.
- Тарҳрезии бе мухлис: Ensures silent operation, suitable for various environments.
2. Дастурамал оид ба насб
Follow these steps to set up your VIMIN 5-Port Gigabit PoE Switch:
- Дастгоҳро кушоед: Carefully remove the PoE switch, power cable, and user manual from the packaging.
- Пайваст кардани барқ: Connect the included power cable to the power input port on the back of the switch and then plug it into a standard electrical outlet. The power indicator light on the front panel should illuminate.
- Connect Uplink Device: Connect your router, NVR, or main network device to the Gigabit uplink port (Port 5) using a standard Ethernet cable.
- Пайваст кардани дастгоҳҳои PoE: Connect your PoE-compatible devices (e.g., IP cameras, access points, VoIP phones) to any of the PoE+ ports (Ports 1-4) using Ethernet cables. The switch will automatically detect and power these devices if they are IEEE 802.3af/at compliant.
- Тасдиқи пайвастҳо: Check the LED indicators on the front panel. The 'Power' LED should be solid green. The 'Link/Act' LEDs for connected ports should be solid green (link) and blink (activity).
Image: Illustration of the PoE switch's front and rear, highlighting the built-in power supply and port designations (PoE ports 1-4, Uplink port 5).
Image: A visual guide to the plug-and-play setup, showing power connection, device connection (camera, AP, computer, printer), and network router connection.
The switch is designed for plug-and-play operation, requiring no software configuration for basic network functionality.
Image: The VIMIN PoE switch with its dimensions (14cm/5.5in length, 20cm/7.9in width, 4.4cm/1.7in height), emphasizing its compact size and plug-and-play nature.
Усулҳои насб
The VIMIN PoE switch offers flexible installation options:
- Ҷойгиркунии мизи корӣ: Simply place the switch on a flat, stable surface.
- Насбкунӣ: Металл casing is designed for easy wall-mounting using appropriate screws (not included).
Image: Two installation methods are depicted: the switch placed on a desk and mounted vertically on a wall, demonstrating its versatility.
3. Дастурҳои истифодабарӣ
Once the switch is powered on and devices are connected, it operates automatically. Here are specific operational features:
Функсияи порт
- PoE+ Ports (1-4): These ports provide both data connectivity and power to connected IEEE 802.3af/at compliant devices. Each port can deliver up to 30W.
- Uplink Port (5): This port is a standard Gigabit Ethernet port for connecting to your main network infrastructure. It does not provide PoE.
Image: The PoE switch is shown as a central hub connecting an Access Point, Router, Computer, Camera, Printer, and IP Phone, illustrating its broad compatibility.
One-Key VLAN Mode
The switch features a One-Key VLAN mode to enhance network security and performance. To activate or deactivate VLAN mode, use the dedicated switch on the front panel:
- VLAN ON: In this mode, PoE ports 1-4 are isolated from each other, preventing direct communication between devices connected to these ports. They can still communicate with the uplink port (Port 5). This is useful for preventing IP camera interference or enhancing security in multi-device setups.
- VLAN OFF (Ordinary Mode): All connected devices can communicate directly with each other, as in a standard unmanaged switch.
Image: A visual representation of the VLAN toggle switch on the PoE device, explaining the 'ON' (VLAN Mode) and 'OFF' (Ordinary Mode) functionalities with their respective benefits.
Фаъолияти Гигабит
The switch supports Gigabit Ethernet (1000 Mbps) on all ports, providing significantly faster data transfer rates compared to traditional 100 Mbps networks.
Image: A graphic demonstrating that the Gigabit switch offers speeds 10 times faster than a 100Mbps network, highlighting its superior performance.
4. Нигоҳдорӣ ва нигоҳубин
To ensure optimal performance and longevity of your VIMIN PoE Switch, consider the following:
- Шароити экологӣ: Operate the switch within its specified temperature range (14°F to 131°F / -10°C to 55°C) and humidity levels. Avoid direct sunlight, excessive heat sources, and damp муҳитҳо.
- Тозакунӣ: Барои тоза кардани беруни коммутатор аз матои нарм ва хушк истифода баред. Аз тозакунандаҳои моеъ ё аэрозолӣ истифода набаред.
- Вентилятсия: Ensure proper airflow around the switch. Although it has a fanless design, adequate ventilation helps dissipate heat.
- Муҳофизати барқ: The switch features 4KV lightning protection. While this provides significant safeguarding, it is still advisable to disconnect the switch during severe electrical storms if possible.
- Тарҳрезии бе мухлис: The fanless design contributes to silent operation and reduces dust accumulation inside the device, minimizing maintenance needs.
Image: The PoE switch is depicted in both cold (14°F) and hot (131°F) environments, emphasizing its reliability under extreme temperature conditions.
Image: The PoE switch is shown in a quiet home setting, illustrating its fanless design for zero noise and its durable metal casing.
5. Баррасии мушкилот
If you encounter issues with your VIMIN PoE Switch, refer to the following common troubleshooting steps:
- Не қудрат:
- Ensure the power cable is securely connected to both the switch and a working electrical outlet.
- Бо васл кардани дастгоҳи дигар санҷед, ки васлаки барқ кор мекунад ё не.
- Истинод/фаъолият дар Порт:
- Verify that the Ethernet cable is properly connected at both ends (switch port and connected device).
- Try a different Ethernet cable to rule out cable issues.
- Боварӣ ҳосил кунед, ки дастгоҳи пайвастшуда фаъол аст ва дуруст кор мекунад.
- For PoE ports, confirm the connected device is IEEE 802.3af/at compliant. Passive PoE devices are not supported.
- Дастгоҳи PoE барқро қабул намекунад:
- Check the total power budget (72W) and individual port power (30W). Ensure you are not exceeding the switch's capacity with multiple high-power devices.
- Verify the device requires PoE and is compatible with IEEE 802.3af/at standards.
- Кӯшиш кунед, ки дастгоҳро ба порти дигари PoE пайваст кунед.
- Network Performance Issues (Slow Speed):
- Ensure all connected devices and cables support Gigabit Ethernet for optimal speed.
- Трафики аз ҳад зиёд ё ҳалқаҳои шабакаро тафтиш кунед.
- If VLAN mode is enabled, ensure it is configured as desired for your network setup.
- Devices on PoE Ports Cannot Communicate with Each Other:
- Check the One-Key VLAN switch. If it is in 'ON' position, ports 1-4 are isolated. Switch it to 'OFF' for direct communication between these ports.
If issues persist after following these steps, please contact VIMIN customer support.
6. Мушаххасоти
Detailed technical specifications for the VIMIN 5-Port Gigabit PoE Switch:
| Хусусият | Тавсифи |
|---|---|
| Рақами модел | 5 Port | 4xPoE + 72W | 1xUPLink |
| Шумораи портҳо | 5 (4x PoE+, 1x Uplink) |
| Стандартҳои PoE | IEEE 802.3af/at (Note: Does NOT support passive PoE) |
| Қувваи максималӣ барои як порти PoE | 30 Вт |
| Буҷети умумии қувваи барқ | 72 Вт |
| Меъёри интиқоли маълумот | 1000 Megabits Per Second (Gigabit Ethernet) |
| Иқтидори гузариш | 10 Гбит/с |
| Навъи интерфейс | PoE, RJ45 |
| Маводи парванда | Металл |
| Насбкунӣ | Desktop or Wall-Mount |
| Андозаҳо (L x W x H) | 14cm x 20cm x 4.4cm (5.5in x 7.9in x 1.7in) |
| Вазни ашё | 1.94 фунт (0.88 килограмм) |
| Ҳарорати корӣ | 14°F то 131°F (-10°C то 55°C) |
| Компонентҳои дохилшуда | 1* User Manual, 1* 5-Port PoE Switch, 1* Power Cable |
| Дастгоҳҳои мувофиқ | Access Point, Camera, Computer, Printer, Router |
| UPC | 756166576957 |
Image: A visual representation of the power capabilities, indicating 30W per PoE port and a total power budget of 72W for the switch.
Image: A diagram illustrating the 10 Gbps switching capacity of the VIMIN PoE switch, indicating its high-speed data processing capability.
7. Кафолат ва дастгирӣ
VIMIN is committed to providing reliable products and excellent customer service. For specific warranty details, please refer to the documentation included with your product or visit the official VIMIN webсайт.
Дастгирии муштариён
If you require technical assistance, have questions about your product, or need to report an issue, please contact our support team:
- Дастгирии почтаи электронӣ: support@vimintech.com
- Professional Technical Team: Access to a dedicated team for technical inquiries.
- 24H High Quality Service: Committed to providing timely and effective support.
Image: Contact details for VIMIN support, including email address, mention of a professional technical team, and 24-hour high-quality service.
