Муқаддима
Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This energy-saving, rechargeable glue gun kit is designed for various crafting and DIY projects, offering fast heating and a lightweight design for ease of use. It comes with 20 mini glue sticks and features an automatic safety power-off function. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.
Маълумот оид ба бехатарӣ
- Always keep the glue gun away from children.
- Do not touch the nozzle or melted glue as they can reach high temperatures and cause burns.
- Use only glue sticks of the specified diameter (0.27" Dia) to prevent damage or malfunction.
- Боварӣ ҳосил кунед, ки майдони корӣ хуб вентилятсия карда мешавад.
- Do not leave the hot glue gun unattended when it is powered on.
- Unplug or power off the glue gun when not in use or before performing any maintenance.
- Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
- Allow the equipment to cool down completely before packing it away.
- This glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.
Мундариҷаи баста
Лутфан мундариҷаи бастаро тафтиш кунед, то боварӣ ҳосил кунед, ки ҳамаи ашё мавҷуд ва осеб надидаанд:
- 1 x WORKPRO 3.6V Cordless Hot Glue Gun
- 20 x Mini Glue Sticks (0.27" Dia)
- 1 x сими пуркунандаи Type-C
- 1 x Дастури корбар (ин ҳуҷҷат)
Маҳсулот ба охир расидview
Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun:
- Сопло: Dispenses melted glue.
- Тугмаи ON/OFF: Дастгоҳро фаъол ва хомӯш мекунад.
- Glue Stick Entry: Where glue sticks are inserted.
- Нишондиҳандаи LED: Displays heating status (red for heating, green for ready) and charging status (red for charging, green for charged).
- Trigger Lever: Activates glue dispensing.
- Порти пуркунандаи Type-C: Барои пайваст кардани сими пуркунандаи барқ.
- Retractable Stand-up Base: Provides stability when the gun is not in use.
Ташкил кардан
Charging the Glue Gun
The WORKPRO hot glue gun is equipped with a 2500mAh rechargeable lithium battery. Before first use, or when the battery is low, charge the device:
- Locate the Type-C charging port on the glue gun.
- Connect the provided Type-C charging cable to the glue gun and to a 5V 1A power source (e.g., power bank, computer USB socket, car USB socket, or a USB wall adapter).
- Нишондиҳандаи LED ҳангоми пуркунии барқ сурх нишон медиҳад ва ҳангоми пур кардани барқ сабз мешавад.
Дастурҳои амалиётӣ
Follow these steps to operate your hot glue gun:
- Стики ширешро ворид кунед: Insert a mini glue stick (0.27" diameter) into the back opening of the glue gun until it stops.
- Фаъол: Press and hold the ON/OFF switch for 3 seconds. The LED indicator will light up red, indicating that the gun is heating.
- Пеш аз гарм кардан: Allow the glue gun to preheat for approximately 90 seconds. The LED indicator will change from red to green when it is ready for use.
- Ба кор бурдани ширеш: Once the LED is green, gently pull the trigger lever to dispense melted glue onto your desired surface.
- Хомӯшкунии худкор: The glue gun is equipped with an 8-minute automatic safety power-off function. If left idle for 8 minutes, it will automatically power off to conserve battery and enhance safety.
Эзоҳҳои муҳим:
- Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
- Таҷҳизотро хомӯш кунед ва бигзоред, ки пеш аз бастабандии он пурра хунук шавад.
- The glue gun features a less-drip nozzle design to reduce glue spillage and keep your work area clean.
Нигоҳдорӣ
- Тозакунӣ: Ensure the glue gun is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
- Нигоҳубини сопло: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can be carefully removed once the gun is cold.
- Нигоҳдорӣ: Store the glue gun in a cool, dry place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the chamber if storing for an extended period.
- Нигоҳубини батарея: For optimal battery life, avoid fully discharging the battery frequently. Charge it regularly, even if not in constant use.
Мушкилкушо
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Туфангчаи часпак гарм намешавад. | Батарея кам ё мурдааст. Power switch not pressed correctly. | Туфангчаи часпакро пурра пур кунед. Press and hold the ON/OFF switch for 3 seconds until the LED lights up. |
| No glue dispenses when trigger is pulled. | Туфангчаи часпак ба қадри кофӣ гарм нест. Glue stick not fully inserted or jammed. | Wait for the LED indicator to turn green. Ensure glue stick is fully inserted. Do not force it. |
| Glue drips excessively from nozzle. | Normal during heating/cooling. Андозаи нодурусти чӯбчаи часпак. | Place the gun on its stand. Use only 0.27" diameter glue sticks. |
| LED indicator remains red. | Still heating up. Пуркунии барқ идома дорад. | Wait for approximately 90 seconds for it to turn green. Wait for charging to complete (LED turns green). |
Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Бренд | WORKPRO |
| Рақами модел | W125235 |
| Манбаи нерӯ | Батарея (литий-ион) |
| Ҷилдиtage | 3.6 вольт |
| Ватtage | 9 ватт |
| Иқтидори батарея | 2500 мАч |
| Вуруди пуркунандаи барқ | 5V 1A (Навъи C) |
| Вақти пеш аз гармкунӣ | тахминан. 90 сония |
| Glue Output Speed | 0.14 унс/дақ |
| Compatible Glue Stick Diameter | 0.27 inches (Mini Sticks) |
| Хомӯшии худкор | 8 дақиқаи беамалӣ |
| Вазни ашё | 1.1 фунт |
| Андозаҳои бастаҳо | 8.11 x 7.52 x 2.13 инч |
| Кишвари аслӣ | Хитой |
| Маводи мувофиқ | Wood, Ceramic, Metal, Stone |
Кафолат ва дастгирӣ
For warranty information and customer support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, you may visit the official WORKPRO store on Amazon: WORKPRO Store
