FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank User Manual

1. Муқаддима

Thank you for choosing the FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank. This device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for various electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

Image 1.1: The FLYLINKTECH BD10 Jump Starter unit with its smart battery clamps.

2. Маълумот оид ба бехатарӣ

Барои пешгирӣ аз ҷароҳат ё вайроншавии дастгоҳ ё воситаи нақлиёт, ҳамеша чораҳои бехатарии зеринро риоя кунед:

• Кӯшиш накунед, ки батареяи яхкардаро ба кор дароред.
• Пайвасти дурусти қутбиро таъмин кунед (сурх cl)amp ба мусбат, cl сиёҳamp to negative). Reverse polarity can cause damage.
• Do not allow the smart clamps to touch each other when connected to the jump starter.
• Дастгоҳро аз кӯдакон дур нигоҳ доред.
• Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
• Дастгоҳро ба қисмҳо ҷудо накунед ё тағир надиҳед.
• Use only the provided smart clamps and charging cables.
• If the device becomes excessively hot during use, disconnect it immediately.

Image 2.1: The jump starter incorporates multiple safety features such as spark-proof, reverse polarity, overvoltage, short circuit, overload, and high-temperature protection.

3. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ашё дар баста мавҷуд аст:

• FLYLINKTECH BD10 Jump Starter Unit
• Батареяи интеллектуалӣ Clamps
• USB-C ба кабели USB-C
• USB-A ба кабели USB-C
• 12V DC Car Charger Adapter
• Дастури корбар
• Қуттии нигаҳдорӣ

Image 3.1: The complete package includes the jump starter, smart clamps, various cables, user manual, and a protective storage case.

4. Насбкунӣ ва пуркунии барқ

4.1 Пардохти ибтидоӣ

Before first use, fully charge the jump starter. The device features a 26800mAh battery capacity.

• Connect the provided USB-C cable to the jump starter's USB-C input port.
• Connect the other end of the cable to a compatible USB wall charger (not included). For fastest charging, use a PD 45W charger.
• The LED screen will display the charging status and battery percentage.

4.2 Charging Times

Note: A 45W wall charger is not included in the package.

Image 4.1: The device supports PD 45W fast charging, significantly reducing recharge time when using a compatible charger.

5. Дастурҳои истифодабарӣ

5.1 Ҷаҳиш ба кор андохтани мошин

The FLYLINKTECH BD10 is capable of jump-starting all gas engines and diesel engines up to 12.0L.

1. Ensure Sufficient Charge: Check the jump starter's LED screen to ensure it has at least 50% charge.
2. Connect Smart Clamps: Insert the blue plug of the smart clamps into the jump starter's 12V output port. Ensure a firm connection.
3. Пайвастшавӣ ба батареяи мошин:
   • Замима кунед сурх (+) clamp to the vehicle's positive battery terminal.
   • Замима кунед сиёҳ (-) clamp to the vehicle's negative battery terminal.
4. Нишондиҳандаи санҷиш: Кл интеллектуалӣamp indicator light should turn solid green, indicating a correct connection. If it flashes or shows red, check connections and battery status.
5. Press BOOST (if needed): If the vehicle battery is extremely low or completely dead, press the 'BOOST' button on the jump starter. Wait for the indicator light on the smart clamps to turn solid green.
6. Мошинро оғоз кунед: Attempt to start your vehicle. If it doesn't start on the first try, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
7. Хориҷ кардани Clamps: Пас аз ба кор андохтани мошин, фавран дастгоҳи интеллектуалии барқро ҷудо кунедamps from the car battery, then disconnect them from the jump starter.

Image 5.1: The jump starter connected to a car battery, ready for operation. It supports 6000A peak current, 12V output, and is suitable for a wide range of engines.

Image 5.2: Visual guide illustrating the four steps to jump-start a vehicle: connect the plug, attach clamps, press boost, and start the engine.

5.2 Функсияи бонки барқ

The BD10 can charge multiple electronic devices via its USB-A and USB-C ports.

• Баромади USB1: Up to 18W (max)
• Баромади USB2: Up to 18W (max)
• Баромади USB-C: То 45 Вт (PD)

Connect your device using the appropriate USB cable to the desired output port. The LED screen will show 'OUT' and the wattage being drawn.

Image 5.3: The jump starter functioning as a power bank, simultaneously charging a smartphone and a tablet via its USB ports.

5.3 Чароғаки LED

The built-in LED flashlight offers three modes: constant light, SOS signal, and strobe light.

• Press and hold the flashlight button to turn on the constant light.
• Press the button again to cycle through SOS and strobe modes.
• Барои хомӯш кардан боз пахш кунед ва нигоҳ доред.

Image 5.4: The integrated LED flashlight provides illumination, an SOS signal, and a strobe function for emergency situations.

5.4 Informative LED Screen

The 6.0-inch LED screen provides real-time information about the device's status:

• Сатҳи батарея: Фоизи боқимондаи батареяро нишон медиҳадtage.
• IN/OUT Indicator: Shows whether the device is charging (IN) or discharging (OUT).
• Ватtage Намоиш: Indicates the power (W) being drawn or supplied.
• Огоҳиҳои хатогӣ: Displays specific error codes or symbols if an issue occurs.

Image 5.5: The 6.0-inch LED screen provides clear information on battery percentage, input/output status, and power consumption.

6. Нигоҳдорӣ

• Пуркунии мунтазам: To prolong battery life, recharge the jump starter every 3-6 months, even if not in use.
• Нигоҳдорӣ: Store the device in its protective case in a cool, dry place, away from direct sunlight and moisture.
• Тозакунӣ: Дастгоҳро бо матои мулоим ва хушк пок кунед. Моддаҳои кимиёвии сахт ё маводи абразивиро истифода набаред.
• Clamp Нигоҳубин: Боварӣ ҳосил кунед, ки clamps are clean and free of corrosion before and after each use.

7. Баррасии мушкилот

The device features multiple alarm situations indicated by audible signals and screen displays:

• Ҳаҷми пастtage Муҳофизат: Audible signal "3". Recharge the device.
• Ҷилди берунӣtage Exceeds Vehicle Voltage: Audible signal "4". Check vehicle battery voltage.
• Муҳофизати ноқилҳои кӯтоҳ: Audible signal "5". Check clamp connections for short circuits.
• Safety Mode Activated: Audible signal "6". Device has entered safety mode due to an issue.
• Муҳофизати аз ҳад зиёд: Audible signal "7". Reduce load or check connections.
• Ҳушдор оид ба ҳарорати баланд/паст: Audible signal "8". Allow device to return to operating temperature range (-20°C to 60°C).
• Reverse Connection: Audible signal "9". Correct the clamp қутбӣ

Тасвири 7.1: Ба охир расидview of the device's multi-alarm system, indicating various protection states with unique audible signals.

Агар пас аз иҷрои ин қадамҳо мушкилот боқӣ монад, лутфан бо дастгирии муштариён тамос гиред.

8. Мушаххасоти

Image 8.1: The device is designed to operate reliably in extreme climates, from -20°C (-4°F) to 60°C (140°F).

9. Кафолат ва дастгирӣ

FLYLINKTECH is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH webсайт. Лутфан далели хариди худро бо мақсади кафолат нигоҳ доред.